Bigrab Posted December 1, 2009 Posted December 1, 2009 I had the same problem I/O error as everybody else but already went and bought a brand new Pioneer DVR-S18L (SATA) and the same error comes up. I have tried both verbatims and aones but that didn't make a difference. I did a virtual ram check (all was ok), updated the firmware, formatted and changed the OS from Windows 7 to XP, tried an older version of imgburn, wrote from different hdd's, tried the Patin-Couffin Software and ended up reinstalling W7 because none of those made a difference. Ultra DMA Mode 5 is also enabled. The only thing that worked for the first copy (but none afterwards) was to select 'Reading - Always use buffered I/O' and changing the buffer to 512MB I don't have the error log anymore but it's basically the same... the burn process fails after approx 10 minutes every time. Sorry, with all the formatting I lost the error log but it's basically the same as everybody else's... Please Help!!! Thanks!
LIGHTNING UK! Posted December 1, 2009 Posted December 1, 2009 Just burn another disc so we can get an actual log please. It's a waste of time to try and troubleshoot without one, there are loads of different 'I/O Errors'. Those options you changed have nothing to do with anything. btw, I guess you purchased that Pioneer because you'd heard good things about Pioneer drives... well the x18 models are different to all previous Pioneer drives because they use the Mediatek chipset and not the NEC one. That's to say, you've ended up with what is essentially a LiteOn drive - only where LiteOn have been doing firmware for Mediatek chipsets for years, this is basically Pioneers first attempt.
Bigrab Posted December 4, 2009 Author Posted December 4, 2009 Sorry it took so long... I had to get some blanks first... I 19:10:02 ImgBurn Version 2.5.0.0 started! I 19:10:02 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 19:10:02 Total Physical Memory: 6,290,616 KB - Available: 5,283,364 KB W 19:10:02 Drive I:\ (FAT32) does not support single files > 4 GB in size. I 19:10:02 Initialising SPTI... I 19:10:02 Searching for SCSI / ATAPI devices... I 19:10:02 Found 2 DVD±RW/RAMs! I 19:11:28 Operation Started! I 19:11:28 Source File: Q:\360 ISO\Blood.Bowl-PAL-XBOX360-DAGGER\dgr-blb\dgr-blb.dvd I 19:11:28 Source File Sectors: 3,697,696 (MODE1/2048) I 19:11:28 Source File Size: 7,572,881,408 bytes I 19:11:28 Source File Volume Identifier: XGD2DVD_NTSC I 19:11:28 Source File Volume Set Identifier: 34672923 I 19:11:28 Source File Implementation Identifier: Sonic Scenarist 3.1 I 19:11:28 Source File File System(s): ISO9660, UDF (1.02) I 19:11:28 Destination Device: [3:0:0] PIONEER DVD-RW DVR-218L 1.02 (J:) (ATA) I 19:11:28 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 4x) I 19:11:28 Destination Media Sectors: 4,173,824 I 19:11:28 Write Mode: DVD I 19:11:28 Write Type: DAO I 19:11:28 Write Speed: 2.4x I 19:11:28 Link Size: Auto I 19:11:28 Lock Volume: Yes I 19:11:28 Test Mode: No I 19:11:28 OPC: No I 19:11:28 BURN-Proof: Enabled W 19:11:29 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 19:11:29 Advanced Settings - Optimal Writing Speed: No I 19:11:29 User Specified L0 Data Zone Capacity: 1,913,760 I 19:11:29 Set L0 Data Zone Capacity Succeeded! I 19:11:30 Filling Buffer... (40 MB) I 19:11:32 Writing LeadIn... I 19:12:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 19:12:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 19:12:25 Writing Layer 0... (LBA: 0 - 1913759) I 19:24:32 Writing Layer 1... (LBA: 1913760 - 3697695) W 19:24:54 Failed to Write Sectors 1914976 - 1915007 - Reason: Write Error W 19:24:54 Retrying (1 of 20)... I 19:24:57 Writing Sectors... W 19:24:58 Failed to Write Sectors 1915616 - 1915647 - Reason: Invalid Address For Write W 19:24:58 Retrying (1 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (2 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (3 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (4 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (5 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (6 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (7 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (8 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (9 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (10 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (11 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (12 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (13 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (14 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (15 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (16 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (17 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (18 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (19 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write W 19:24:58 Retrying (20 of 20)... W 19:24:58 Retry Failed - Reason: Invalid Address For Write E 19:25:23 Failed to Write Sectors 1915616 - 1915647 - Reason: Invalid Address For Write E 19:25:23 Next Writable Address: 1914336 I 19:25:23 Synchronising Cache... W 19:25:28 User opted to skip the 'Close Track/Session/Disc' functions. E 19:25:28 Failed to Write Image! I 19:25:28 Exporting Graph Data... I 19:25:28 Graph Data File: C:\Users\Rab\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-218L_1.02_04-DECEMBER-2009_19-11_UMEDISC-DL1-64_2.4x.ibg I 19:25:28 Export Successfully Completed! E 19:25:28 Operation Failed! - Duration: 00:13:59 I 19:25:28 Average Write Rate: 4,924 KB/s (3.6x) - Maximum Write Rate: 5,621 KB/s (4.1x)
mmalves Posted December 4, 2009 Posted December 4, 2009 I 19:11:28 Destination Device: [3:0:0] PIONEER DVD-RW DVR-218L 1.02 (J:) (ATA)I 19:11:28 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 4x) W 19:24:54 Failed to Write Sectors 1914976 - 1915007 - Reason: Write Error Your burner doesn't like the blanks you're using, and we've seen many people having problems with that dye/ink. Use Verbatim DVD+R DL blanks and it should work.
Bigrab Posted December 4, 2009 Author Posted December 4, 2009 I 19:11:28 Destination Device: [3:0:0] PIONEER DVD-RW DVR-218L 1.02 (J:) (ATA)I 19:11:28 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 4x) W 19:24:54 Failed to Write Sectors 1914976 - 1915007 - Reason: Write Error Your burner doesn't like the blanks you're using, and we've seen many people having problems with that dye/ink. Use Verbatim DVD+R DL blanks and it should work. Thanks for the quick reply! The verbatim's I had previously used must have been duds from India... Although I've been doing this for a while now I never had any problems burning the DL's and therefore never had to understand the error log... I would appreciate it if you could please explain to me how the section you referred to shows that the discs are at fault? I am eager to learn but just don't know how to read/understand the log. Thanks!
mmalves Posted December 5, 2009 Posted December 5, 2009 Notice the bold text in my post above: that's the disc identification code: it tells the burner what material was used to make the blank disc, and then the burner can choose the appropriate way to write on that type of material. Did you see that the only available write speed is 4x? That's because Pioneer decided that this material can't be burned faster than that, which is usually a sign of low quality media. The next line shows the error your burner returned when ImgBurn told it to burn those sectors: Write Error. It means the drive wasn't able to write to the disc, which can be caused by dirt on the burner's lens (very unlikely in a new burner like yours) or low quality media. Verbatim only uses 2 dyes: MKM-001-00 for their 2.4x rated blanks which have been in the market ever since dual-layer burning was made available, and MKM-003-00 for their 8x rated blanks, which your new burner probably supports burning up to 10x speed or even more.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now