Write speed mismatch and verify fail

[dntel123]

Hiya, never posted logs on here but im curious to whats wrong and hoping it isnt my Disk Drive, these are my Logs:

 

00:46:54 ImgBurn Version 2.5.0.0 started!

I 00:46:54 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 00:46:54 Total Physical Memory: 2,096,440 KB - Available: 805,920 KB

I 00:46:54 Initialising SPTI...

I 00:46:54 Searching for SCSI / ATAPI devices...

I 00:46:56 Found 1 DVD±RW/RAM!

I 00:50:14 Operation Started!

I 00:50:14 Source File: C:\Users\Enjoi\Desktop\activate.iso

I 00:50:14 Source File Sectors: 129,824 (MODE1/2048)

I 00:50:14 Source File Size: 265,879,552 bytes

I 00:50:14 Source File Volume Identifier: XBOX360

I 00:50:14 Source File Volume Set Identifier: 33479a57

I 00:50:14 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 00:50:14 Source File File System(s): ISO9660, UDF (1.02)

I 00:50:14 Destination Device: [1:0:0] TSSTcorp CDDVDW TS-L632H AS02 (D:) (ATA)

I 00:50:14 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x)

I 00:50:14 Destination Media Sectors: 4,173,824

I 00:50:14 Write Mode: DVD

I 00:50:14 Write Type: DAO

I 00:50:14 Write Speed: 2.4x

I 00:50:14 Link Size: Auto

I 00:50:14 Lock Volume: Yes

I 00:50:14 Test Mode: No

I 00:50:14 OPC: No

I 00:50:14 BURN-Proof: Enabled

W 00:50:17 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x)

I 00:50:17 Book Type Setting: DVD-ROM

I 00:50:47 Optimal L0 Data Zone Capacity: 129,824

I 00:50:47 Optimal L0 Data Zone Method: None

I 00:50:47 Filling Buffer... (40 MB)

I 00:50:49 Writing LeadIn...

I 00:51:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 129823)

I 00:51:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 129823)

I 00:52:19 Synchronising Cache...

I 00:52:40 Closing Track...

I 00:52:58 Finalising Disc...

I 00:57:02 Exporting Graph Data...

I 00:57:02 Graph Data File: C:\Users\Enjoi\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L632H_AS02_03-DECEMBER-2009_00-50_MKM-003-00_2.4x.ibg

I 00:57:02 Export Successfully Completed!

I 00:57:02 Operation Successfully Completed! - Duration: 00:06:48

I 00:57:02 Average Write Rate: 3,709 KB/s (2.7x) - Maximum Write Rate: 4,207 KB/s (3.0x)

I 00:57:02 Cycling Tray before Verify...

W 00:57:37 Waiting for device to become ready...

I 00:57:48 Device Ready!

I 00:57:48 Operation Started!

I 00:57:48 Source Device: [1:0:0] TSSTcorp CDDVDW TS-L632H AS02 (D:) (ATA)

I 00:57:48 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x)

I 00:57:48 Image File: C:\Users\Enjoi\Desktop\activate.iso

I 00:57:48 Image File Sectors: 129,824 (MODE1/2048)

I 00:57:48 Image File Size: 265,879,552 bytes

I 00:57:48 Image File Volume Identifier: XBOX360

I 00:57:48 Image File Volume Set Identifier: 33479a57

I 00:57:48 Image File Implementation Identifier: Daikin U.S. Comtec Lab

I 00:57:48 Image File File System(s): ISO9660, UDF (1.02)

I 00:57:48 Read Speed (Data/Audio): MAX / MAX

E 00:57:48 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 00:57:48 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 00:57:48 Image File's Track Sectors: 129824 (TOC Sectors: 129824)

E 00:57:48 Operation Failed! - Duration: 00:00:00

I 00:57:48 Average Verify Rate: N/A - Maximum Verify Rate: N/A

I 01:05:27 Close Request Acknowledged

I 01:05:27 Closing Down...

I 01:05:27 Shutting down SPTI...

I 01:05:27 ImgBurn closed!

 

If you look through, I can see a couple problems that werent there a while ago, firstly, Write speed miscompare or mismatch, when i try to select 2.4x for xbox backups it says it tried but failed and got 4x.

 

Secondly, i probably shouldnt have had verify ticked but i did for some reason, and it popped out my laptops disk thingy, said it could put it back in manually of course, so i popped it back in and then it tried to verify and gave me the OH NOOOOO,

 

Im currently on 8 coasters atm of Verb DVD + R DL 8.5 GB 8x which I know for a fact are the best because I have burned a perfect record until now.

 

Any helps appreciated, I am now trying in clone CD to see if it makes a difference.

 

Thanks!

 

P.s just a quicky as well: If it fails and OH NOOO's when verifying does tht screw up the disk and would in turn make it not work? ta

Edited December 3, 2009 by dntel123

[mmalves]

I 00:50:14 Destination Device: [1:0:0] TSSTcorp CDDVDW TS-L632H AS02 (D:) (ATA)

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning again at 6x or 4x.

[LIGHTNING UK!]

I 00:50:14 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x)

I 00:50:14 Destination Media Sectors: 4,173,824

I 00:50:14 Write Mode: DVD

I 00:50:14 Write Type: DAO

I 00:50:14 Write Speed: 2.4x

I 00:50:14 Link Size: Auto

I 00:50:14 Lock Volume: Yes

I 00:50:14 Test Mode: No

I 00:50:14 OPC: No

I 00:50:14 BURN-Proof: Enabled

W 00:50:17 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x)

 

Your drive/firmware doesn't support 2.4x on the MKM-003-00 dye - notice how it only lists 3x, 4x and 6x?

 

So that's why you get the write speed miscompare. You pick 2.4x, it (the drive) thinks you're crazy and goes with 3x regardless.

 

Verifying doesn't damage anything, that would just be silly. It does exactly the opposite and detects damage / errors caused by duff burns.

 

Just because your burner has an issue with initialising the burnt disc doesn't mean other drives (inc the xbox one) will do too.

[dntel123]

I 00:50:14 Destination Device: [1:0:0] TSSTcorp CDDVDW TS-L632H AS02 (D:) (ATA)

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning again at 6x or 4x.

 

Yer cheers, thing is i went there already downloaded the one for my drive, wouldnt let me do it, bit weird. Also strange is that i swapped and used Clone CD and i had no problem, and now my game backup works, confused.com

[mmalves]

When you used ImgBurn you also didn't get any error at the burning process, but it did come up when ImgBurn went on to verify the burn. If the other program doesn't verify then it isn't a fair comparison, is it?