XLave Posted December 25, 2009 Posted December 25, 2009 I've have this problem when trying to burn DVDs: I 22:33:23 ImgBurn Version 2.4.4.0 started! I 22:33:23 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 22:33:23 Total Physical Memory: 4.160.552 KB - Available: 2.739.072 KB I 22:33:23 Initialising SPTI... I 22:33:23 Searching for SCSI / ATAPI devices... I 22:33:23 Found 2 DVD-ROMs and 1 BD-RE! I 22:34:47 Operation Started! I 22:34:47 Source File: C:\Users\XLave\Downloads\The legend of Zelda - Twilight Princess.ISO I 22:34:47 Source File Sectors: 712.880 (MODE1/2048) I 22:34:47 Source File Size: 1.459.978.240 bytes I 22:34:47 Source File Volume Identifier: The Legend of Zelda Twilight Pri I 22:34:47 Source File File System(s): None I 22:34:47 Destination Device: [1:0:0] MATSHITA BD-MLT UJ230AS 1.01 (D:) (SATA) I 22:34:47 Destination Media Type: DVD-R (Disc ID: CMC MAG. AF1) (Speeds: 2x) I 22:34:47 Destination Media Sectors: 716.800 I 22:34:47 Write Mode: DVD I 22:34:47 Write Type: DAO I 22:34:47 Write Speed: 2x I 22:34:47 Link Size: Auto I 22:34:47 Lock Volume: Yes I 22:34:47 Test Mode: No I 22:34:47 OPC: No I 22:34:47 BURN-Proof: Enabled I 22:34:48 Filling Buffer... (40 MB) I 22:34:49 Writing LeadIn... W 22:35:04 Failed to Write Sectors 3712 - 3743 - Reason: Power Calibration Area Error W 22:35:04 Retrying (1 of 20)... W 22:35:04 Retry Failed - Reason: Power Calibration Area Error W 22:35:04 Retrying (2 of 20)... W 22:35:04 Retry Failed - Reason: Power Calibration Area Error W 22:35:04 Retrying (3 of 20)... W 22:35:04 Retry Failed - Reason: Power Calibration Area Error W 22:35:04 Retrying (4 of 20)... W 22:35:04 Retry Failed - Reason: Power Calibration Area Error W 22:35:04 Retrying (5 of 20)... W 22:35:04 Retry Failed - Reason: Power Calibration Area Error W 22:35:04 Retrying (6 of 20)... W 22:35:04 Retry Failed - Reason: Power Calibration Area Error W 22:35:04 Retrying (7 of 20)... W 22:35:04 Retry Failed - Reason: Power Calibration Area Error W 22:35:04 Retrying (8 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (9 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (10 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (11 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (12 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (13 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (14 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (15 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (16 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (17 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (18 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (19 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error W 22:35:05 Retrying (20 of 20)... W 22:35:05 Retry Failed - Reason: Power Calibration Area Error E 22:35:59 Failed to Write Sectors 3712 - 3743 - Reason: Power Calibration Area Error I 22:35:59 Synchronising Cache... E 22:36:05 Failed to Write Image! E 22:36:05 Operation Failed! - Duration: 00:01:18 I 22:36:05 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) i'd got the same problem trying to burn another image iso in a 4.7gb (TDK) instead of a 1.4gb (TDK too. I'm using a Vaio and Windows 7, drivers are updated. Thanx for your time
LIGHTNING UK! Posted December 25, 2009 Posted December 25, 2009 Buy better discs, Verbatim or Taiyo Yuden. Update ImgBurn too.
XLave Posted December 25, 2009 Author Posted December 25, 2009 Buy better discs, Verbatim or Taiyo Yuden. Update ImgBurn too. Same disc are burner in my old pentium 4 with the same version, the same images and same SO (Seven)....why doesn't work with the Vaio??
mmalves Posted December 26, 2009 Posted December 26, 2009 Because the burner in your Vaio doesn't support the blanks you're using. And please do update ImgBurn on all your computers because we don't support old versions.
XLave Posted December 27, 2009 Author Posted December 27, 2009 Because the burner in your Vaio doesn't support the blanks you're using. And please do update ImgBurn on all your computers because we don't support old versions. Ok, new log from Imgburn 2.5, same ISO and Verbating-R disc.....same problem. I 16:35:30 ImgBurn Version 2.5.0.0 started! I 16:35:30 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 16:35:30 Total Physical Memory: 4.160.552 KB - Available: 2.084.448 KB I 16:35:30 Initialising SPTI... I 16:35:30 Searching for SCSI / ATAPI devices... I 16:35:30 Found 2 DVD-ROMs and 1 BD-RE! I 16:35:59 Operation Started! I 16:35:59 Source File: C:\Users\XLave\Downloads\Zelda - Twinlight Princess.iso I 16:35:59 Source File Sectors: 712.880 (MODE1/2048) I 16:35:59 Source File Size: 1.459.978.240 bytes I 16:35:59 Source File Volume Identifier: The Legend of Zelda Twilight Pri I 16:35:59 Source File File System(s): Special I 16:35:59 Destination Device: [1:0:0] MATSHITA BD-MLT UJ230AS 1.01 (D:) (SATA) I 16:35:59 Destination Media Type: DVD-R (Disc ID: MCC 01RG20) (Speeds: 2x) I 16:35:59 Destination Media Sectors: 715.056 I 16:35:59 Write Mode: DVD I 16:35:59 Write Type: DAO I 16:35:59 Write Speed: 2x I 16:35:59 Link Size: Auto I 16:35:59 Lock Volume: Yes I 16:35:59 Test Mode: No I 16:35:59 OPC: No I 16:35:59 BURN-Proof: Enabled I 16:36:02 Filling Buffer... (40 MB) I 16:36:03 Writing LeadIn... W 16:36:17 Failed to Write Sectors 3712 - 3743 - Reason: Power Calibration Area Error W 16:36:17 Retrying (1 of 20)... W 16:36:17 Retry Failed - Reason: Power Calibration Area Error W 16:36:17 Retrying (2 of 20)... W 16:36:17 Retry Failed - Reason: Power Calibration Area Error W 16:36:17 Retrying (3 of 20)... W 16:36:17 Retry Failed - Reason: Power Calibration Area Error W 16:36:17 Retrying (4 of 20)... W 16:36:17 Retry Failed - Reason: Power Calibration Area Error W 16:36:17 Retrying (5 of 20)... W 16:36:17 Retry Failed - Reason: Power Calibration Area Error W 16:36:17 Retrying (6 of 20)... W 16:36:17 Retry Failed - Reason: Power Calibration Area Error W 16:36:17 Retrying (7 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (8 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (9 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (10 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (11 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (12 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (13 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (14 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (15 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (16 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (17 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (18 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (19 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error W 16:36:18 Retrying (20 of 20)... W 16:36:18 Retry Failed - Reason: Power Calibration Area Error E 16:36:21 Failed to Write Sectors 3712 - 3743 - Reason: Power Calibration Area Error I 16:36:21 Synchronising Cache... E 16:36:25 Failed to Write Image! E 16:36:25 Operation Failed! - Duration: 00:00:25 I 16:36:25 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Anyone knows why??
mmalves Posted December 27, 2009 Posted December 27, 2009 Try cleaning the drive with a lens cleaning disc. Also look for the latest drivers for your motherboard's chipset and/or SATA controller (use SIW to identify your hardware).
Cynthia Posted December 27, 2009 Posted December 27, 2009 I 16:35:59 Destination Media Type: DVD-R (Disc ID: MCC 01RG20) (Speeds: 2x)I 16:35:59 Destination Media Sectors: 715.056 You drive reports only 1/3 of the sectors that should be on a blanc -R disc. If it's not caused by this: I 16:35:59 Source File File System(s): Special
LIGHTNING UK! Posted December 28, 2009 Posted December 28, 2009 Where did you find such old discs?! Get some of the more recent 8x (MCC 02RG20) /16x (MCC 03RG20) Verbatim discs. Better still, some using the Taiyo Yuden dyes (TYG02 / TYG03).
XLave Posted December 28, 2009 Author Posted December 28, 2009 The disc are ok, i'd write that image in my old prescott and all goes ok, writed at 2x like in vaio and it works. I think the problem is in the disc writer of the vaio.
LIGHTNING UK! Posted December 28, 2009 Posted December 28, 2009 Until you find some discs that the drive definitely supports, you can't be sure. Being a bluray drive it's obviously quite new so it'll have firmware designed for the discs that are actually in common use today. The 'MCC 01RG20' MID is not common these days.
timmyleeturner Posted September 9, 2016 Posted September 9, 2016 I finally bought an external USB Burner and all problems were solved. Seems my old Laptop DVD Burner isn't cutting the mustard anymore, so I assume that a good cleaning is the issue. I was being told it was my Disc's, but I use the better Verbatim all the time (bout a hundred a month) for data burning and never and issue. Also, my problem was also that my Old Media Jukebox 12 views both of my burners, but could not find a way to direct it to the new one regardless of my settings. IMGBurn is awesome. ImgBurn.log
Recommended Posts