dezzfx Posted December 28, 2009 Posted December 28, 2009 sup guys. so i was bumbling around looking for help, and this place seems pretty helpful. i've been attempting to burn an image, have been through 3 different programs, used dvd-r, cd-r, cd-rw, and have downloaded imgburn... all to no avail. a few days ago i used roxio to burn an image and it worked flawlessly... but now it wont work. below is my log... hopefully someone can help? I 00:20:06 ImgBurn Version 2.5.0.0 started! I 00:20:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 00:20:06 Total Physical Memory: 3,135,852 KB - Available: 1,301,672 KB W 00:20:06 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 00:20:06 SPTD can have a detrimental effect on drive performance. I 00:20:06 Initialising SPTI... I 00:20:06 Searching for SCSI / ATAPI devices... I 00:20:06 Found 1 DVD-ROM/CD-RW! I 00:20:36 Operation Started! I 00:20:36 Source File: C:\Documents and Settings\Tilda Reeder\Desktop\Windows XP Professional.iso I 00:20:36 Source File Sectors: 297,930 (MODE1/2048) I 00:20:36 Source File Size: 610,160,640 bytes I 00:20:36 Source File Volume Identifier: VRMPVOL_EN I 00:20:36 Source File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 00:20:36 Source File Implementation Identifier: ULTRAISO I 00:20:36 Source File File System(s): ISO9660 (Bootable) I 00:20:36 Destination Device: [0:0:0] TEAC CDRWDVD DW224SLR D.0F (D:) (ATA) I 00:20:36 Destination Media Type: CD-RW (Disc ID: 97m10s00f, Ritek Co.) (Speeds: 4x) I 00:20:36 Destination Media Sectors: 359,847 I 00:20:36 Write Mode: CD I 00:20:36 Write Type: SAO I 00:20:36 Write Speed: MAX I 00:20:36 Lock Volume: Yes I 00:20:36 Test Mode: No I 00:20:36 OPC: No I 00:20:36 BURN-Proof: Enabled I 00:20:36 Filling Buffer... (40 MB) I 00:20:37 Writing LeadIn... E 00:21:08 Failed to Write Sectors -150 - -119 - Reason: Command Sequence Error I 00:21:08 Writing Sectors... I 00:21:08 Synchronising Cache... W 00:21:13 User opted to skip the 'Close Track/Session/Disc' functions. E 00:21:13 Failed to Write Image! E 00:21:13 Operation Failed! - Duration: 00:00:37 I 00:21:13 Average Write Rate: N/A - Maximum Write Rate: N/A I 00:21:37 Operation Started! I 00:21:37 Source File: C:\Documents and Settings\Tilda Reeder\Desktop\Windows XP Professional.iso I 00:21:37 Source File Sectors: 297,930 (MODE1/2048) I 00:21:37 Source File Size: 610,160,640 bytes I 00:21:37 Source File Volume Identifier: VRMPVOL_EN I 00:21:37 Source File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 00:21:37 Source File Implementation Identifier: ULTRAISO I 00:21:37 Source File File System(s): ISO9660 (Bootable) I 00:21:37 Destination Device: [0:0:0] TEAC CDRWDVD DW224SLR D.0F (D:) (ATA) I 00:21:37 Destination Media Type: CD-RW (Disc ID: 97m10s00f, Ritek Co.) (Speeds: 4x) I 00:21:37 Destination Media Sectors: 359,847 I 00:21:37 Write Mode: CD I 00:21:37 Write Type: SAO I 00:21:37 Write Speed: MAX I 00:21:37 Lock Volume: Yes I 00:21:37 Test Mode: No I 00:21:37 OPC: No I 00:21:37 BURN-Proof: Enabled I 00:21:37 Filling Buffer... (40 MB) I 00:21:38 Writing LeadIn... E 00:22:15 Failed to Write Sectors -150 - -119 - Reason: Command Sequence Error I 00:22:15 Writing Sectors... I 00:22:15 Synchronising Cache... W 00:22:19 User opted to skip the 'Close Track/Session/Disc' functions. E 00:22:19 Failed to Write Image! E 00:22:19 Operation Failed! - Duration: 00:00:42 I 00:22:19 Average Write Rate: N/A - Maximum Write Rate: N/A
LIGHTNING UK! Posted December 28, 2009 Posted December 28, 2009 Could be anything, junk media or an old drive. DVD media would never work as the drive can't burn DVDs, it can only read them.
dezzfx Posted December 28, 2009 Author Posted December 28, 2009 Could be anything, junk media or an old drive. DVD media would never work as the drive can't burn DVDs, it can only read them. ok. but i also used cd-r and cd-rw. the iso's i downloaded all got alot of good comments from tpb and demonoid so i dont think the file itself could be bad.
Recommended Posts