kode54 Posted December 30, 2009 Posted December 30, 2009 I am experiencing a similar error to this topic, only I have a SATA recorder, and I've already checked that the cable is properly seated. I can also write off any error with the drive's laser, as I get this error about 20% into recording in test mode. (Oh, and the drive records fine from a Linux USB stick booted on the same machine.) It may or may not make a difference that the SATA interface is set to IDE compatibility mode, and I don't really want to switch over to AHCI to test that, since it would require a repair installation over Windows XP to get it booting again.
mmalves Posted December 30, 2009 Posted December 30, 2009 Then you should look for the latest driver for your SATA controller. It might also be worth trying the burner on all the available SATA ports.
LIGHTNING UK! Posted December 30, 2009 Posted December 30, 2009 The whole 'helping you out' process is made much easier if you do as the big pink banner at the top of this forum says and post a log file!
Recommended Posts