Jump to content

I/O error, fails at 41% everytime


94SupraTT

Recommended Posts

Below is the log.

 

I 07:09:24 Initialising SPTI...

I 07:09:24 Searching for SCSI / ATAPI devices...

I 07:09:25 Found 1 DVD±RW/RAM!

I 07:10:12 Operation Started!

I 07:10:12 Source File: C:\Dance.iso

I 07:10:12 Source File Sectors: 2,294,912 (MODE1/2048)

I 07:10:12 Source File Size: 4,699,979,776 bytes

I 07:10:12 Source File Volume Identifier: Just Dance

I 07:10:12 Source File File System(s): Special

I 07:10:12 Destination Device: [2:0:0] TSSTcorp CDDVDW TS-L633A TO03 (D:) (ATA)

I 07:10:12 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 3x, 4x, 6x, 8x)

I 07:10:12 Destination Media Sectors: 2,295,104

I 07:10:12 Write Mode: DVD

I 07:10:12 Write Type: DAO

I 07:10:12 Write Speed: 3x

I 07:10:12 DVD+R Reserve Track: No

I 07:10:12 Link Size: Auto

I 07:10:12 Lock Volume: Yes

I 07:10:12 Test Mode: No

I 07:10:12 OPC: No

I 07:10:12 BURN-Proof: Enabled

I 07:10:12 Book Type Setting: N/A

I 07:10:12 Filling Buffer... (40 MB)

I 07:10:20 Writing LeadIn...

I 07:10:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 07:10:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 07:17:38 Abort Request Acknowledged

I 07:17:38 Synchronising Cache...

W 07:17:46 User opted to skip the 'Close Track/Session/Disc' functions.

E 07:18:25 Failed to read from file: Dance.iso

E 07:18:25 Reason: The request could not be performed because of an I/O device error.

E 07:18:29 Failed to Write Image!

 

 

I'm on the most recent firmware for my drive. It gets all the way to 41%, the buffer then goes away and it fails.

Edited by 94SupraTT
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.