Griffy Posted January 9, 2010 Posted January 9, 2010 (edited) Hey I've used imgburn quite often but I am using it on a different system now and I keep getting this error message. Things I have already done. Updated the Burners firmware to the latest version. I am using Verbatim DVD+R DL disks. Here's my error log. Please help. I 12:25:58 ImgBurn Version 2.5.0.0 started! I 12:25:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 12:25:58 Total Physical Memory: 2,095,532 KB - Available: 1,222,024 KB W 12:25:58 SPTD can have a detrimental effect on drive performance. I 12:25:58 Initialising SPTI... I 12:25:58 Searching for SCSI / ATAPI devices... I 12:25:58 Found 1 DVD-ROM and 1 DVD�RW! I 12:26:09 Operation Started! I 12:26:09 Source File: I:\- GRIFF -\Borderlands.dvd I 12:26:09 Source File Sectors: 3,827,520 (MODE1/2048) I 12:26:09 Source File Size: 7,838,760,960 bytes I 12:26:09 Source File Volume Identifier: DVD_ROM I 12:26:09 Source File Volume Set Identifier: 356fc000MS UDFBridge I 12:26:09 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:26:09 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:26:09 Source File File System(s): ISO9660, UDF (1.50) I 12:26:09 Destination Device: [4:0:0] PIONEER DVD-RW DVR-212D 1.28 (F:) (ATA) I 12:26:09 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) I 12:26:09 Destination Media Sectors: 4,173,824 I 12:26:09 Write Mode: DVD I 12:26:09 Write Type: DAO I 12:26:09 Write Speed: 2x I 12:26:09 Link Size: Auto I 12:26:09 Lock Volume: Yes I 12:26:09 Test Mode: No I 12:26:09 OPC: No I 12:26:09 BURN-Proof: Enabled W 12:26:09 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) I 12:26:09 Advanced Settings - Optimal Writing Speed: No I 12:26:09 Optimal L0 Data Zone Capacity: 1,913,760 I 12:26:09 Optimal L0 Data Zone Method: Copied From Original Disc W 12:26:27 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error W 12:26:27 Waiting for device to become ready... Edited January 9, 2010 by Griffy
Griffy Posted January 9, 2010 Author Posted January 9, 2010 Tried some other speeds like 4x and 6x? Didn't think of it but will give that a try now.
Cynthia Posted January 9, 2010 Posted January 9, 2010 If that also fails, then it might be worth a try with a cleaning disc.
Griffy Posted January 9, 2010 Author Posted January 9, 2010 Tried some other speeds like 4x and 6x? Didn't think of it but will give that a try now. Now I get a device not ready (Unable to Recover TOC) I put the burn speed down to 2X
LIGHTNING UK! Posted January 9, 2010 Posted January 9, 2010 Tried some other speeds like 4x and 6x? Didn't think of it but will give that a try now. Now I get a device not ready (Unable to Recover TOC) I put the burn speed down to 2X It was already on 2x in your first log. Did you actually try one of the faster ones? Ideally you should try all the supported write speeds (they're mentioned in the log).
Griffy Posted January 9, 2010 Author Posted January 9, 2010 Tried some other speeds like 4x and 6x? Didn't think of it but will give that a try now. Now I get a device not ready (Unable to Recover TOC) I put the burn speed down to 2X It was already on 2x in your first log. Did you actually try one of the faster ones? Ideally you should try all the supported write speeds (they're mentioned in the log). I changed the write speed to 6X and its burning now thank you for your help.
Recommended Posts