jdev Posted January 12, 2010 Share Posted January 12, 2010 Appreciate a little help, Trying to copy some files from DVD to a harddrive after burning from ISO / GI files to DVD-R. When attempting to copy the files I get an error message saying "Cannot Copy Drivers: Cannot read from source file or disk" Also some files I get the error "Cannot Copy filename: Data Error (cyclic redundancy check" Have I done something wrong in the burning to disk? The software seems straight forward. Thanks, James. Link to comment Share on other sites More sharing options...
Cynthia Posted January 12, 2010 Share Posted January 12, 2010 I get the feeling that your burn was not a good one and now when you try to read it back it can't be read = cyclic redundancy check" Did you use the verify option when you burned the disc? Link to comment Share on other sites More sharing options...
jdev Posted January 12, 2010 Author Share Posted January 12, 2010 Yes, used the verify and did not see anything go wrong in the log. One thing I just realised I only have the problem with the .gi files. Regards, James. Link to comment Share on other sites More sharing options...
Cynthia Posted January 12, 2010 Share Posted January 12, 2010 If you have another reader/computer - tried to read it in that drive? Link to comment Share on other sites More sharing options...
jdev Posted January 12, 2010 Author Share Posted January 12, 2010 Yes, can see the files in both computers. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 12, 2010 Share Posted January 12, 2010 Do you still have the log of you burning and verifying this image? Archived logs can be accessed via the 'Help' menu in the program. Copy + paste that bit of it if you do please. Link to comment Share on other sites More sharing options...
jdev Posted January 12, 2010 Author Share Posted January 12, 2010 Here is one sample, I have found a temporary solution to my problem by yanking the files out using a VCD program. So my case is not urgent. :40 ImgBurn Version 2.5.0.0 started! I 17:59:40 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 17:59:40 Total Physical Memory: 2,062,564 KB - Available: 1,064,108 KB I 17:59:40 Initialising SPTI... I 17:59:40 Searching for SCSI / ATAPI devices... I 17:59:40 Found 1 DVD±RW/RAM! I 18:00:54 Operation Started! I 18:00:54 Source File: E:\DesktopImageApps\XPSP3v12009.04.01\Disc 1\XPSP3v12009.04.01-1 (1_0).gi I 18:00:54 Source File Sectors: 1,048,560 (MODE1/2048) I 18:00:54 Source File Size: 2,147,450,880 bytes I 18:00:54 Source File Volume Identifier: XPSP3v12009.04.01-1 I 18:00:54 Source File Volume Set Identifier: 090807_0823 I 18:00:54 Source File Implementation Identifier: RoxioBurnEngine 3.0 I 18:00:54 Source File File System(s): UDF (1.02) I 18:00:54 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-862 RB01 (D:) (ATA) I 18:00:54 Destination Media Type: DVD-R (Disc ID: DAXON016S) (Speeds: 2x, 4x, 6x, 8x) I 18:00:54 Destination Media Sectors: 2,297,888 I 18:00:54 Write Mode: DVD I 18:00:54 Write Type: DAO I 18:00:54 Write Speed: MAX I 18:00:54 Link Size: Auto I 18:00:54 Lock Volume: Yes I 18:00:54 Test Mode: No I 18:00:54 OPC: No I 18:00:54 BURN-Proof: Enabled I 18:00:55 Filling Buffer... (40 MB) I 18:00:57 Writing LeadIn... I 18:01:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 1048559) I 18:01:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1048559) I 18:06:43 Synchronising Cache... I 18:07:26 Exporting Graph Data... I 18:07:26 Graph Data File: C:\Documents and Settings\jdeve308\Application Data\ImgBurn\Graph Data Files\MATSHITA_DVD-RAM_UJ-862_RB01_MONDAY-JANUARY-11-2010_6-00_PM_DAXON016S_MAX.ibg I 18:07:26 Export Successfully Completed! I 18:07:26 Operation Successfully Completed! - Duration: 00:06:31 I 18:07:26 Average Write Rate: 6,168 KB/s (4.5x) - Maximum Write Rate: 8,424 KB/s (6.1x) I 18:07:26 Cycling Tray before Verify... W 18:07:34 Waiting for device to become ready... I 18:07:53 Device Ready! I 18:07:56 Operation Started! I 18:07:56 Source Device: [0:0:0] MATSHITA DVD-RAM UJ-862 RB01 (D:) (ATA) I 18:07:56 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: DAXON016S) (Speeds: 2x, 4x, 6x, 8x) I 18:07:56 Image File: E:\DesktopImageApps\XPSP3v12009.04.01\Disc 1\XPSP3v12009.04.01-1 (1_0).gi I 18:07:56 Image File Sectors: 1,048,560 (MODE1/2048) I 18:07:56 Image File Size: 2,147,450,880 bytes I 18:07:56 Image File Volume Identifier: XPSP3v12009.04.01-1 I 18:07:56 Image File Volume Set Identifier: 090807_0823 I 18:07:56 Image File Implementation Identifier: RoxioBurnEngine 3.0 I 18:07:56 Image File File System(s): UDF (1.02) I 18:07:56 Read Speed (Data/Audio): MAX / MAX I 18:07:56 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1048559) I 18:07:56 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1048559) I 18:13:27 Exporting Graph Data... I 18:13:27 Graph Data File: C:\Documents and Settings\jdeve308\Application Data\ImgBurn\Graph Data Files\MATSHITA_DVD-RAM_UJ-862_RB01_MONDAY-JANUARY-11-2010_6-00_PM_DAXON016S_MAX.ibg I 18:13:27 Export Successfully Completed! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 12, 2010 Share Posted January 12, 2010 Thanks for that. By verifying ok, that Matshita drive has said it can read every sector on the disc and as such, it should have no problem copying the individual files back off it. That is of course assuming the original GI image was ok in the first place and that it was interpreted correctly. Does 'E:\DesktopImageApps\XPSP3v12009.04.01\Disc 1' only contain a single file called 'XPSP3v12009.04.01-1 (1_0).gi' or is it a multi-part GI file? Do the size of the large files add up to roughly what you see in the log file there? I 18:07:56 Image File Sectors: 1,048,560 (MODE1/2048)I 18:07:56 Image File Size: 2,147,450,880 bytes Link to comment Share on other sites More sharing options...
jdev Posted January 13, 2010 Author Share Posted January 13, 2010 There are 3 .gi files XPSP3v12009.04.01-1 (1_0).gi 2097120kb XPSP3v12009.04.01-1 (1_1).gi 593024kb XPSP3v12009.04.01-1.gi 2kb James. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 13, 2010 Share Posted January 13, 2010 You should be loading the little 2kb file then, not the big ones. Loading the little one will pull in the 2 big ones, at the moment you're only burning part of the overall image - hence the reason for it not working! If it doesn't let you load the little one, please attach it in your next post or email it to support. Link to comment Share on other sites More sharing options...
jdev Posted January 13, 2010 Author Share Posted January 13, 2010 Funny that, I was just in the middle of trying that. Someone at work had told me to use the larger one. From your last post I was guessing along that line. & I just tested, guess what! That was it thanks. Link to comment Share on other sites More sharing options...
Recommended Posts