Jump to content

IMG BURN WONT BURN MY XBOX BACKUPS

reefa

By reefa
in ImgBurn Support

 Share

Recommended Posts

reefa ISF Newbie

reefa

Posted
Posted

I was burning backups in imgburn no problem. But not when i try to burn 1 with my normal verbatim disk it wont burn at all. It keeps saying lo data zone failed power callibration error. It was working but is not now please please help

reefa ISF Newbie

reefa

Posted
  • Author
Posted

We'll help when you read the pink bit at the top of the forum properly.

 

:chair:

 

Ok sorry here is my log please please can you help.

 

I 16:27:12 ImgBurn Version 2.5.0.0 started!

I 16:27:12 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 16:27:12 Total Physical Memory: 2,086,204 KB - Available: 1,004,612 KB

I 16:27:12 Initialising SPTI...

I 16:27:12 Searching for SCSI / ATAPI devices...

I 16:27:26 Found 1 DVD±RW!

I 16:27:49 Operation Started!

I 16:27:49 Source File: C:\Users\margaret\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 16:27:49 Source File Sectors: 3,827,488 (MODE1/2048)

I 16:27:49 Source File Size: 7,838,695,424 bytes

I 16:27:49 Source File Volume Identifier: DVD_ROM

I 16:27:49 Source File Volume Set Identifier: fd244000MS UDFBridge

I 16:27:49 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:27:49 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:27:49 Source File File System(s): ISO9660, UDF (1.50)

I 16:27:49 Destination Device: [1:0:0] PBDS DVD+-RW DS-8W1P BD1C (E:) (ATA)

I 16:27:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x)

I 16:27:49 Destination Media Sectors: 4,173,824

I 16:27:49 Write Mode: DVD

I 16:27:49 Write Type: DAO

I 16:27:49 Write Speed: 2.4x

I 16:27:49 Link Size: Auto

I 16:27:49 Lock Volume: Yes

I 16:27:49 Test Mode: No

I 16:27:49 OPC: No

I 16:27:49 BURN-Proof: Enabled

I 16:27:49 User Specified L0 Data Zone Capacity: 1,913,760

E 16:29:15 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 16:29:15 Operation Failed! - Duration: 00:01:26

I 16:29:15 Average Write Rate: N/A - Maximum Write Rate: N/A

reefa ISF Newbie

reefa

Posted
  • Author
Posted

Please help its still not working. The original drive i was using was my laptop drive. Thats what ive always used but that keeps saying power calibration error. So i switched to this 1 to try it and i cant burn with this either as youve seen in the log i get power caliibration error. This is another dual layer drive and it still wont work here is the log

 

 

 

I 22:29:26 ImgBurn Version 2.4.4.0 started!

I 22:29:26 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

I 22:29:26 Total Physical Memory: 2,094,976 KB - Available: 869,992 KB

I 22:29:26 Initialising SPTI...

I 22:29:26 Searching for SCSI / ATAPI devices...

I 22:30:00 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 22:33:53 Operation Started!

I 22:33:53 Source File: C:\Users\REEFA\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 22:33:53 Source File Sectors: 3,827,488 (MODE1/2048)

I 22:33:53 Source File Size: 7,838,695,424 bytes

I 22:33:53 Source File Volume Identifier: DVD_ROM

I 22:33:53 Source File Volume Set Identifier: fd244000MS UDFBridge

I 22:33:53 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:33:53 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:33:53 Source File File System(s): ISO9660, UDF (1.50)

I 22:33:53 Destination Device: [1:0:0] ATAPI DVD A DH16A1P RX12 (E:) (ATA)

I 22:33:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 22:33:53 Destination Media Sectors: 4,173,824

I 22:33:53 Write Mode: DVD

I 22:33:53 Write Type: DAO

I 22:33:53 Write Speed: 6x

I 22:33:53 Link Size: Auto

I 22:33:53 Lock Volume: Yes

I 22:33:53 Test Mode: No

I 22:33:53 OPC: No

I 22:33:53 BURN-Proof: Enabled

I 22:33:53 Book Type Setting: DVD-ROM

I 22:33:53 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 22:33:53 Optimal L0 Data Zone Capacity: 1,913,760

I 22:33:53 Optimal L0 Data Zone Method: Copied From Original Disc

W 22:35:25 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

W 22:35:25 Retrying (1)...

E 22:37:23 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 22:37:23 Operation Failed! - Duration: 00:03:29

I 22:37:23 Average Write Rate: N/A - Maximum Write Rate: N/A

I 22:38:47 Operation Started!

I 22:38:47 Source File: C:\Users\REEFA\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 22:38:47 Source File Sectors: 3,827,488 (MODE1/2048)

I 22:38:47 Source File Size: 7,838,695,424 bytes

I 22:38:47 Source File Volume Identifier: DVD_ROM

I 22:38:47 Source File Volume Set Identifier: fd244000MS UDFBridge

I 22:38:47 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:38:47 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:38:47 Source File File System(s): ISO9660, UDF (1.50)

I 22:38:47 Destination Device: [1:0:0] ATAPI DVD A DH16A1P RX12 (E:) (ATA)

I 22:38:47 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 22:38:47 Destination Media Sectors: 4,173,824

I 22:38:47 Write Mode: DVD

I 22:38:47 Write Type: DAO

I 22:38:47 Write Speed: 8x

I 22:38:47 Link Size: Auto

I 22:38:47 Lock Volume: Yes

I 22:38:47 Test Mode: No

I 22:38:47 OPC: No

I 22:38:47 BURN-Proof: Enabled

I 22:38:47 Book Type Setting: DVD-ROM

I 22:38:47 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 22:38:47 Optimal L0 Data Zone Capacity: 1,913,760

I 22:38:47 Optimal L0 Data Zone Method: Copied From Original Disc

E 22:40:01 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 22:40:01 Operation Failed! - Duration: 00:01:13

I 22:40:01 Average Write Rate: N/A - Maximum Write Rate: N/A

I 23:17:24 Operation Started!

I 23:17:24 Source File: C:\Users\REEFA\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 23:17:24 Source File Sectors: 3,827,488 (MODE1/2048)

I 23:17:24 Source File Size: 7,838,695,424 bytes

I 23:17:24 Source File Volume Identifier: DVD_ROM

I 23:17:24 Source File Volume Set Identifier: fd244000MS UDFBridge

I 23:17:24 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 23:17:24 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 23:17:24 Source File File System(s): ISO9660, UDF (1.50)

I 23:17:24 Destination Device: [1:0:0] ATAPI DVD A DH16A1P RX12 (E:) (ATA)

I 23:17:24 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 23:17:24 Destination Media Sectors: 4,173,824

I 23:17:24 Write Mode: DVD

I 23:17:24 Write Type: DAO

I 23:17:24 Write Speed: 10x

I 23:17:24 Link Size: Auto

I 23:17:24 Lock Volume: Yes

I 23:17:24 Test Mode: No

I 23:17:24 OPC: No

I 23:17:24 BURN-Proof: Enabled

I 23:17:24 Book Type Setting: DVD-ROM

I 23:17:24 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 23:17:24 Optimal L0 Data Zone Capacity: 1,913,760

I 23:17:24 Optimal L0 Data Zone Method: Copied From Original Disc

W 23:18:35 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

I 23:18:35 Filling Buffer... (40 MB)

I 23:18:36 Writing LeadIn...

W 23:19:42 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

W 23:19:42 Retrying (1 of 20)...

W 23:20:48 Retry Failed - Reason: Power Calibration Area Error

W 23:20:48 Retrying (2 of 20)...

W 23:21:54 Retry Failed - Reason: Power Calibration Area Error

W 23:21:54 Retrying (3 of 20)...

W 23:23:01 Retry Failed - Reason: Power Calibration Area Error

W 23:23:01 Retrying (4 of 20)...

W 23:24:07 Retry Failed - Reason: Power Calibration Area Error

W 23:24:07 Retrying (5 of 20)...

I 23:24:36 Abort Request Acknowledged

 

 

 

PLEASE HELP

reefa ISF Newbie

reefa

Posted
  • Author
Posted

Hi m8 i have tries all different speeds and srill the same. I have also cleaned the drive with a lens cleaner. My first log i gave you up the top was my laptop burner that worked perfect, then all of a sudden i got what you saw in the log. The burner i am trying now is on my desktop first time i have tried this 1 as i always used the laptop 1. But i keep gettting the same error as the laptop 1. I have tried to use xbox bacup creator that fails, clone cd that wont even start. Why is 2 buners giving the same errors. And the verbatims i am using are the 1s i always used before on the laptop drive with no problem.

reefa ISF Newbie

reefa

Posted
  • Author
Posted

Try burning at 4x if you haven't already. Also try cleaning the drive with a lens cleaning disc. If it doesn't help then try with the 2.4x Verbatim DVD+R DL blanks or invest in a new burner.

 

 

 

Hi m8 i just got past lo data zone it said succeeded i thought it worked but then it said writin lead then failed here is the log please please help

 

 

I 22:29:26 ImgBurn Version 2.4.4.0 started!

I 22:29:26 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

I 22:29:26 Total Physical Memory: 2,094,976 KB - Available: 869,992 KB

I 22:29:26 Initialising SPTI...

I 22:29:26 Searching for SCSI / ATAPI devices...

I 22:30:00 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 22:33:53 Operation Started!

I 22:33:53 Source File: C:\Users\REEFA\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 22:33:53 Source File Sectors: 3,827,488 (MODE1/2048)

I 22:33:53 Source File Size: 7,838,695,424 bytes

I 22:33:53 Source File Volume Identifier: DVD_ROM

I 22:33:53 Source File Volume Set Identifier: fd244000MS UDFBridge

I 22:33:53 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:33:53 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:33:53 Source File File System(s): ISO9660, UDF (1.50)

I 22:33:53 Destination Device: [1:0:0] ATAPI DVD A DH16A1P RX12 (E:) (ATA)

I 22:33:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 22:33:53 Destination Media Sectors: 4,173,824

I 22:33:53 Write Mode: DVD

I 22:33:53 Write Type: DAO

I 22:33:53 Write Speed: 6x

I 22:33:53 Link Size: Auto

I 22:33:53 Lock Volume: Yes

I 22:33:53 Test Mode: No

I 22:33:53 OPC: No

I 22:33:53 BURN-Proof: Enabled

I 22:33:53 Book Type Setting: DVD-ROM

I 22:33:53 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 22:33:53 Optimal L0 Data Zone Capacity: 1,913,760

I 22:33:53 Optimal L0 Data Zone Method: Copied From Original Disc

W 22:35:25 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

W 22:35:25 Retrying (1)...

E 22:37:23 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 22:37:23 Operation Failed! - Duration: 00:03:29

I 22:37:23 Average Write Rate: N/A - Maximum Write Rate: N/A

I 22:38:47 Operation Started!

I 22:38:47 Source File: C:\Users\REEFA\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 22:38:47 Source File Sectors: 3,827,488 (MODE1/2048)

I 22:38:47 Source File Size: 7,838,695,424 bytes

I 22:38:47 Source File Volume Identifier: DVD_ROM

I 22:38:47 Source File Volume Set Identifier: fd244000MS UDFBridge

I 22:38:47 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:38:47 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:38:47 Source File File System(s): ISO9660, UDF (1.50)

I 22:38:47 Destination Device: [1:0:0] ATAPI DVD A DH16A1P RX12 (E:) (ATA)

I 22:38:47 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 22:38:47 Destination Media Sectors: 4,173,824

I 22:38:47 Write Mode: DVD

I 22:38:47 Write Type: DAO

I 22:38:47 Write Speed: 8x

I 22:38:47 Link Size: Auto

I 22:38:47 Lock Volume: Yes

I 22:38:47 Test Mode: No

I 22:38:47 OPC: No

I 22:38:47 BURN-Proof: Enabled

I 22:38:47 Book Type Setting: DVD-ROM

I 22:38:47 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 22:38:47 Optimal L0 Data Zone Capacity: 1,913,760

I 22:38:47 Optimal L0 Data Zone Method: Copied From Original Disc

E 22:40:01 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 22:40:01 Operation Failed! - Duration: 00:01:13

I 22:40:01 Average Write Rate: N/A - Maximum Write Rate: N/A

I 23:17:24 Operation Started!

I 23:17:24 Source File: C:\Users\REEFA\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 23:17:24 Source File Sectors: 3,827,488 (MODE1/2048)

I 23:17:24 Source File Size: 7,838,695,424 bytes

I 23:17:24 Source File Volume Identifier: DVD_ROM

I 23:17:24 Source File Volume Set Identifier: fd244000MS UDFBridge

I 23:17:24 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 23:17:24 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 23:17:24 Source File File System(s): ISO9660, UDF (1.50)

I 23:17:24 Destination Device: [1:0:0] ATAPI DVD A DH16A1P RX12 (E:) (ATA)

I 23:17:24 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 23:17:24 Destination Media Sectors: 4,173,824

I 23:17:24 Write Mode: DVD

I 23:17:24 Write Type: DAO

I 23:17:24 Write Speed: 10x

I 23:17:24 Link Size: Auto

I 23:17:24 Lock Volume: Yes

I 23:17:24 Test Mode: No

I 23:17:24 OPC: No

I 23:17:24 BURN-Proof: Enabled

I 23:17:24 Book Type Setting: DVD-ROM

I 23:17:24 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 23:17:24 Optimal L0 Data Zone Capacity: 1,913,760

I 23:17:24 Optimal L0 Data Zone Method: Copied From Original Disc

W 23:18:35 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

I 23:18:35 Filling Buffer... (40 MB)

I 23:18:36 Writing LeadIn...

W 23:19:42 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

W 23:19:42 Retrying (1 of 20)...

W 23:20:48 Retry Failed - Reason: Power Calibration Area Error

W 23:20:48 Retrying (2 of 20)...

W 23:21:54 Retry Failed - Reason: Power Calibration Area Error

W 23:21:54 Retrying (3 of 20)...

W 23:23:01 Retry Failed - Reason: Power Calibration Area Error

W 23:23:01 Retrying (4 of 20)...

W 23:24:07 Retry Failed - Reason: Power Calibration Area Error

W 23:24:07 Retrying (5 of 20)...

I 23:24:36 Abort Request Acknowledged

reefa ISF Newbie

reefa

Posted
  • Author
Posted

As you can see in both logs i have 2 different burners, how come they keep coming back with the same error message. Is there nothing i can do with 1 of them as i cant afford a new burner please help here is the rescent log just now after retrying 9 times after lo zone succeeded

 

 

 

 

 

 

I 00:08:36 ImgBurn Version 2.5.0.0 started!

I 00:08:36 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

I 00:08:36 Total Physical Memory: 2,094,976 KB - Available: 711,364 KB

W 00:08:36 SPTD can have a detrimental effect on drive performance.

I 00:08:36 Initialising SPTI...

I 00:08:36 Searching for SCSI / ATAPI devices...

I 00:08:49 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 00:09:55 Operation Started!

I 00:09:55 Source File: C:\Users\REEFA\Desktop\ZARTHSAAB\ZARTHSAAB.dvd

I 00:09:55 Source File Sectors: 3,827,488 (MODE1/2048)

I 00:09:55 Source File Size: 7,838,695,424 bytes

I 00:09:55 Source File Volume Identifier: DVD_ROM

I 00:09:55 Source File Volume Set Identifier: fd244000MS UDFBridge

I 00:09:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 00:09:55 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 00:09:55 Source File File System(s): ISO9660, UDF (1.50)

I 00:09:55 Destination Device: [1:0:0] ATAPI DVD A DH16A1P RX12 (E:) (ATA)

I 00:09:55 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 00:09:55 Destination Media Sectors: 3,827,488

I 00:09:55 Write Mode: DVD

I 00:09:55 Write Type: DAO

I 00:09:55 Write Speed: MAX

I 00:09:55 Link Size: Auto

I 00:09:55 Lock Volume: Yes

I 00:09:55 Test Mode: No

I 00:09:55 OPC: No

I 00:09:56 BURN-Proof: Enabled

I 00:10:11 Book Type Setting: DVD-ROM

I 00:10:22 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 00:10:27 Optimal L0 Data Zone Capacity: 1,913,760

I 00:10:27 Optimal L0 Data Zone Method: Copied From Original Disc

I 00:10:28 Set L0 Data Zone Capacity Succeeded!

I 00:10:30 Filling Buffer... (40 MB)

I 00:10:31 Writing LeadIn...

W 00:11:56 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

W 00:11:56 Retrying (1 of 20)...

W 00:13:09 Retry Failed - Reason: Power Calibration Area Error

W 00:13:09 Retrying (2 of 20)...

W 00:14:25 Retry Failed - Reason: Power Calibration Area Error

W 00:14:25 Retrying (3 of 20)...

W 00:15:38 Retry Failed - Reason: Power Calibration Area Error

W 00:15:38 Retrying (4 of 20)...

W 00:17:02 Retry Failed - Reason: Power Calibration Area Error

W 00:17:02 Retrying (5 of 20)...

W 00:18:14 Retry Failed - Reason: Power Calibration Area Error

W 00:18:15 Retrying (6 of 20)...

W 00:19:32 Retry Failed - Reason: Power Calibration Area Error

W 00:19:32 Retrying (7 of 20)...

W 00:20:51 Retry Failed - Reason: Power Calibration Area Error

W 00:20:51 Retrying (8 of 20)...

I 00:21:33 Abort Request Acknowledged

W 00:22:07 Retry Failed - Reason: Power Calibration Area Error

E 00:22:07 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

I 00:22:07 Synchronising Cache...

I 00:22:19 Closing Track...

W 00:23:32 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Error

W 00:23:32 Close Track Failed! - Reason: Power Calibration Area Error

W 00:23:32 Retrying (1 of 3)...

 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept