Krimo Posted February 3, 2010 Posted February 3, 2010 Hello Everyone, I have a Dell Studio 1555 laptop with a HL-DT-ST DVD+-RW GA10N Dual layer DVD burner. I want to burn Xbox 360 backups. I've only had two successful burns and the rest were failures. I use Verbatim DVD+R DL 2.4 write speed high quality discs, made in singapore everything. I keep getting an I/O error! sometimes right away, and sometimes after 7% in the burn. I looked at numerous forums about this issue and did what they said and still no luck. Can somebody out there from IMGBURN help me. I'm tired of throwing away my money. Here is the picture of the dialogue box that appears just before it fails: and here is my log: I 16:05:48 ImgBurn Version 2.5.0.0 started! I 16:05:48 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 16:05:48 Total Physical Memory: 4,152,176 KB - Available: 2,646,732 KB W 16:05:48 SPTD can have a detrimental effect on drive performance. I 16:05:48 Initialising SPTI... I 16:05:48 Searching for SCSI / ATAPI devices... I 16:05:48 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 16:13:13 Operation Started! I 16:13:13 Source File: C:\Users\Karim Cherradi\Desktop\ptc-me\ptc-me.dvd I 16:13:13 Source File Sectors: 3,825,924 (MODE1/2048) I 16:13:13 Source File Size: 7,835,492,352 bytes I 16:13:13 Source File Volume Identifier: XGD2DVD_NTSC I 16:13:13 Source File Volume Set Identifier: 34672923 I 16:13:13 Source File Implementation Identifier: Sonic Scenarist 3.1 I 16:13:13 Source File File System(s): ISO9660, UDF (1.02) I 16:13:13 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GA10N A105 (E:) (SATA) I 16:13:13 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 16:13:13 Destination Media Sectors: 4,173,824 I 16:13:13 Write Mode: DVD I 16:13:13 Write Type: DAO I 16:13:13 Write Speed: 2.4x I 16:13:13 Link Size: Auto I 16:13:13 Lock Volume: Yes I 16:13:13 Test Mode: No I 16:13:13 OPC: No I 16:13:13 BURN-Proof: Enabled I 16:13:13 Book Type Setting: N/A I 16:13:13 User Specified L0 Data Zone Capacity: 1,913,760 I 16:14:17 Set L0 Data Zone Capacity Succeeded! I 16:14:18 Filling Buffer... (40 MB) I 16:14:19 Writing LeadIn... I 16:14:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 16:14:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 16:14:25 Writing Layer 0... (LBA: 0 - 1913759) W 16:16:33 Failed to Write Sectors 205856 - 205871 - Reason: Focus Servo Error W 16:16:33 Retrying (1 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (2 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (3 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (4 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (5 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (6 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (7 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (8 of 20)... W 16:16:33 Retry Failed - Reason: Invalid Address For Write W 16:16:33 Retrying (9 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (10 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (11 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (12 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (13 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (14 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (15 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (16 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (17 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (18 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (19 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:34 Retrying (20 of 20)... W 16:16:34 Retry Failed - Reason: Invalid Address For Write W 16:16:45 Retrying (21)... W 16:16:45 Retry Failed - Reason: Invalid Address For Write W 16:16:46 Retrying (22)... W 16:16:46 Retry Failed - Reason: Invalid Address For Write W 16:16:46 Retrying (23)... W 16:16:46 Retry Failed - Reason: Invalid Address For Write W 16:16:46 Retrying (24)... W 16:16:46 Retry Failed - Reason: Invalid Address For Write W 16:16:46 Retrying (25)... W 16:16:46 Retry Failed - Reason: Invalid Address For Write W 16:16:46 Retrying (26)... W 16:16:46 Retry Failed - Reason: Invalid Address For Write W 16:16:47 Retrying (27)... W 16:16:47 Retry Failed - Reason: Invalid Address For Write W 16:17:32 Retrying (28)... W 16:17:32 Retry Failed - Reason: Invalid Address For Write W 16:17:34 Retrying (29)... W 16:17:34 Retry Failed - Reason: Invalid Address For Write E 16:17:36 Failed to Write Sectors 205856 - 205871 - Reason: Focus Servo Error E 16:17:36 Next Writable Address: 205312 I 16:17:36 Synchronising Cache... W 16:17:42 User opted to skip the 'Close Track/Session/Disc' functions. E 16:17:42 Failed to Write Image! I 16:17:52 Exporting Graph Data... I 16:17:52 Graph Data File: C:\Users\Karim Cherradi\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GA10N_A105_WEDNESDAY-FEBRUARY-03-2010_4-13_PM_MKM-001-00_2.4x.ibg I 16:17:52 Export Successfully Completed! E 16:17:52 Operation Failed! - Duration: 00:04:29 I 16:17:52 Average Write Rate: 2,155 KB/s (1.6x) - Maximum Write Rate: 3,370 KB/s (2.4x)
mmalves Posted February 3, 2010 Posted February 3, 2010 I 16:13:13 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GA10N A105 (E:) (SATA) Update your burner's firmware and try again. If it doesn't work then try cleaning the burner with a lens cleaning disc.
Krimo Posted February 4, 2010 Author Posted February 4, 2010 I 16:13:13 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GA10N A105 (E:) (SATA) Update your burner's firmware and try again. If it doesn't work then try cleaning the burner with a lens cleaning disc. Thanks mmalves, I updated my drive's firmware, but as a result i only had one successful burn. Sometimes it would get to as high as 40% and then show the I/O Error! screen. I would try to clean the lens of my dvd burner but i don't believe thats the issue because my dvd drive is built into the laptop, kinda how a cd player looks like in a car stereo where its just a slit that you pop the cd in. anyways heres my new error log: I 19:14:48 ImgBurn Version 2.5.0.0 started! I 19:14:48 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 19:14:48 Total Physical Memory: 4,152,176 KB - Available: 2,934,920 KB W 19:14:48 SPTD can have a detrimental effect on drive performance. I 19:14:48 Initialising SPTI... I 19:14:48 Searching for SCSI / ATAPI devices... I 19:14:48 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 19:15:46 Operation Started! I 19:15:46 Source File: L:\Downloads\Xbox 360 Games\Assassins_Creed_II_NTSC_XBOX360-GameStop.[www.usabit.com]\gs-ac2\gs-ac2.dvd I 19:15:46 Source File Sectors: 3,827,488 (MODE1/2048) I 19:15:46 Source File Size: 7,838,695,424 bytes I 19:15:46 Source File Volume Identifier: DVD_ROM I 19:15:46 Source File Volume Set Identifier: fd244000MS UDFBridge I 19:15:46 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:15:46 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:15:46 Source File File System(s): ISO9660, UDF (1.50) I 19:15:46 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GA10N A203 (E:) (SATA) I 19:15:46 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 19:15:46 Destination Media Sectors: 4,173,824 I 19:15:46 Write Mode: DVD I 19:15:46 Write Type: DAO I 19:15:46 Write Speed: MAX I 19:15:46 Link Size: Auto I 19:15:46 Lock Volume: Yes I 19:15:46 Test Mode: No I 19:15:46 OPC: No I 19:15:46 BURN-Proof: Enabled I 19:15:46 Book Type Setting: N/A I 19:15:46 User Specified L0 Data Zone Capacity: 1,913,760 I 19:16:50 Set L0 Data Zone Capacity Succeeded! I 19:16:51 Filling Buffer... (40 MB) I 19:16:53 Writing LeadIn... I 19:16:59 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:16:59 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:16:59 Writing Layer 0... (LBA: 0 - 1913759) W 19:33:08 Failed to Write Sectors 1558992 - 1559007 - Reason: Focus Servo Error W 19:33:08 Retrying (1 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (2 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (3 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (4 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (5 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (6 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (7 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (8 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (9 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (10 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (11 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (12 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (13 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (14 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (15 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (16 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (17 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (18 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (19 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:33:08 Retrying (20 of 20)... W 19:33:08 Retry Failed - Reason: Invalid Address For Write W 19:34:34 Retrying (21)... W 19:34:34 Retry Failed - Reason: Invalid Address For Write W 19:34:35 Retrying (22)... W 19:34:35 Retry Failed - Reason: Invalid Address For Write E 19:34:38 Failed to Write Sectors 1558992 - 1559007 - Reason: Focus Servo Error E 19:34:38 Next Writable Address: 1558448 I 19:34:38 Synchronising Cache... W 19:34:46 User opted to skip the 'Close Track/Session/Disc' functions. E 19:34:46 Failed to Write Image! I 19:34:47 Exporting Graph Data... I 19:34:47 Graph Data File: C:\Users\Karim Cherradi\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GA10N_A203_WEDNESDAY-FEBRUARY-03-2010_7-15_PM_MKM-001-00_MAX.ibg I 19:34:47 Export Successfully Completed! E 19:34:47 Operation Failed! - Duration: 00:19:00 I 19:34:47 Average Write Rate: 2,944 KB/s (2.1x) - Maximum Write Rate: 3,365 KB/s (2.4x) I hope someone finds a solution to this soon, i've wasted so many discs #39;(
mmalves Posted February 4, 2010 Posted February 4, 2010 There's no solution to be "found": if the burner can't burn the best dual-layer media you can get then it's as good as dead, at least in my opinion.
Krimo Posted February 4, 2010 Author Posted February 4, 2010 There's no solution to be "found": if the burner can't burn the best dual-layer media you can get then it's as good as dead, at least in my opinion. Maybe another program can be interfering with it? I've tried shutting down numerous other programs. I'm starting to think its just imgburn on my computer doesn't go well
LIGHTNING UK! Posted February 4, 2010 Posted February 4, 2010 Your drive bombing out during the burn is nothing to do with ImgBurn. ImgBurn doesn't generate the errors, your drive does. ImgBurn simply relays them to the user.
Recommended Posts