KgCobra Posted February 13, 2010 Share Posted February 13, 2010 Hey, I thought I had a bad drive, Pioneer BDR-203, after I was burning AVCHD images without issue for months. I had to switch media from Memorex 25 gigs to Maxwell, and I began to have issues. So, I found more Memorex,but with same problems. I still have no problems burning 8 gig disc images with Verbatim DVD+R DL. I've replaced the cables,(I've had that issue before) with no luck. I was then convinced that the drive was going out, so I purchased a Pioneer BDR-205. Straight out of the box it failed to write with same error log (listed). The only new programs I installed was Office 2010 RTM, updates from Microsoft, I've also updated the drives firmware to latest, as well as my BIOS and motherboard drivers... Not sure what is left to do?!? I even uninstalled ImgBurn and re-installed it just for shits and giggles. I would really appreciate in other suggestions or comments. Stumped, KgCobra I 17:24:56 ImgBurn Version 2.5.0.0 started! I 17:24:56 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 17:24:56 Total Physical Memory: 4,192,760 KB - Available: 3,085,356 KB I 17:24:56 Initialising SPTI... I 17:24:56 Searching for SCSI / ATAPI devices... I 17:24:56 Found 1 DVD±RW and 1 BD-RE! I 17:25:20 Operation Started! I 17:25:20 Source File: D:\Documents\AVCHD Temp\Image Files\I-Robot.iso I 17:25:20 Source File Sectors: 11,923,744 (MODE1/2048) I 17:25:20 Source File Size: 24,419,827,712 bytes I 17:25:20 Source File Volume Identifier: I-Robot I 17:25:20 Source File Volume Set Identifier: 3C4C662F00B5F0B5 I 17:25:20 Source File Application Identifier: ImgBurn v2.5.0.0 I 17:25:20 Source File Implementation Identifier: ImgBurn I 17:25:20 Source File File System(s): UDF (2.50) I 17:25:20 Destination Device: [1:1:0] PIONEER BD-RW BDR-205 1.04 (G:) (ATA) I 17:25:20 Destination Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x, 6x, 8x, 10x) I 17:25:20 Destination Media Sectors: 12,219,392 I 17:25:20 Write Mode: BD I 17:25:20 Write Type: DAO I 17:25:20 Write Speed: MAX I 17:25:20 BD-R Verify Not Required: Yes I 17:25:20 Link Size: Auto I 17:25:20 Lock Volume: Yes I 17:25:20 Test Mode: No I 17:25:20 OPC: No I 17:25:20 BURN-Proof: Enabled I 17:25:20 Advanced Settings - Optimal Writing Speed: No I 17:25:21 Filling Buffer... (40 MB) I 17:25:21 Writing LeadIn... I 17:25:40 Writing Session 1 of 1... (1 Track, LBA: 0 - 11923743) I 17:25:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11923743) W 17:25:40 Failed to Write Sectors 1072 - 1087 - Reason: Invalid Address For Write W 17:25:40 Retrying (1 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (2 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (3 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (4 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (5 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (6 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (7 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (8 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (9 of 20)... W 17:25:40 Retry Failed - Reason: Invalid Address For Write W 17:25:40 Retrying (10 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (11 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (12 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (13 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (14 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (15 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (16 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (17 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (18 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (19 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write W 17:25:41 Retrying (20 of 20)... W 17:25:41 Retry Failed - Reason: Invalid Address For Write E 17:25:48 Failed to Write Sectors 1072 - 1087 - Reason: Invalid Address For Write E 17:25:48 Next Writable Address: 896 I 17:25:48 Synchronising Cache... W 17:25:51 User opted to skip the 'Close Track/Session/Disc' functions. E 17:25:51 Failed to Write Image! I 17:25:51 Exporting Graph Data... I 17:25:51 Graph Data File: C:\Users\XXXXXXXXXXX\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-205_1.04_FRIDAY-FEBRUARY-12-2010_5-25_PM_RITEK-BR2-00_MAX.ibg I 17:25:51 Export Successfully Completed! E 17:25:51 Operation Failed! - Duration: 00:00:30 I 17:25:51 Average Write Rate: 306 KB/s (0.1x) - Maximum Write Rate: 306 KB/s (0.1x) Link to comment Share on other sites More sharing options...
Cynthia Posted February 13, 2010 Share Posted February 13, 2010 The Memorex discs you used earlier, had they the same media code as the current discs? Disc ID: RITEK-BR2-00 Link to comment Share on other sites More sharing options...
KgCobra Posted February 13, 2010 Author Share Posted February 13, 2010 The Memorex discs you used earlier, had they the same media code as the current discs? Disc ID: RITEK-BR2-00 Yup... exactly the same. Link to comment Share on other sites More sharing options...
Cynthia Posted February 13, 2010 Share Posted February 13, 2010 I 17:25:20 Destination Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x, 6x, 8x, 10x) On your old drive you also used 10x? Tried other speeds with your new drive? Link to comment Share on other sites More sharing options...
KgCobra Posted February 13, 2010 Author Share Posted February 13, 2010 I 17:25:20 Destination Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x, 6x, 8x, 10x) On your old drive you also used 10x? Tried other speeds with your new drive? Tried that as well... even 1x. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 13, 2010 Share Posted February 13, 2010 Can it burn on a decent Verbatim BD-RE? Don't keep wasting BD-R on the problem! *What* you're burning makes no difference so 8GB Vs 25GB is not a valid observation. It just comes down to the media being totally different. Link to comment Share on other sites More sharing options...
kryten Posted February 13, 2010 Share Posted February 13, 2010 Office 2010 RTM. Awesome! Link to comment Share on other sites More sharing options...
KgCobra Posted February 15, 2010 Author Share Posted February 15, 2010 (edited) Can it burn on a decent Verbatim BD-RE? Don't keep wasting BD-R on the problem! *What* you're burning makes no difference so 8GB Vs 25GB is not a valid observation. It just comes down to the media being totally different. Ok, now I know I have an issue... The 8gb Verbatim discs are no longer working. I also have a IDE Pioneer RW burner that is working fine. I am guessing I have I/O SATA controller issue on the motherboard. Not sure how to fix that kind of thing, but to replace the board. The board website (Gigabyte) has no help on this issue. Anybody have a way of checking the I/O controller on a board? Edited February 15, 2010 by KgCobra Link to comment Share on other sites More sharing options...
Cynthia Posted February 15, 2010 Share Posted February 15, 2010 An option could be an internal Silicon Image card. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 15, 2010 Share Posted February 15, 2010 What board do you actually have? Link to comment Share on other sites More sharing options...
KgCobra Posted February 15, 2010 Author Share Posted February 15, 2010 What board do you actually have? Gigabyte GA-P43-ES3G rev 1.0 http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2960 Link to comment Share on other sites More sharing options...
Recommended Posts