NewAge Posted February 24, 2010 Posted February 24, 2010 (edited) Hello, I'm being using the program for long with no problems, and I bought some new DVD-R Sony 10DMR47AS4 and they seem not to work on ImgBurn... It takes the program very long in Device not Ready (Logical Unit is in Process of becoming ready) and after it says Disc not empty. I bought the DVDs yesterday and they are blank, I've tried with several an still the same.... Here is the log: ATAPI DVD W DH16W1P LP21 (ATA) Current Profile: DVD-R Disc Information: Status: Complete Erasable: No Sessions: 1 Free Sectors: 2.297.888 Free Space: 4.706.074.624 bytes Free Time: 510:40:38 (MM:SS:FF) Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.495.103 Last Physical Sector in Layer 0: 0 Can I do something to solve the problem? Thank you. Edited February 24, 2010 by NewAge
LIGHTNING UK! Posted February 24, 2010 Posted February 24, 2010 Your drive is misreporting the disc information - notice it says 'Status: Complete'. A firmware update might fix the issue - but I doubt you'll fine one. Take the discs back and get some different ones (Verbatim or Taiyo Yuden).
NewAge Posted February 24, 2010 Author Posted February 24, 2010 Your drive is misreporting the disc information - notice it says 'Status: Complete'. A firmware update might fix the issue - but I doubt you'll fine one. Take the discs back and get some different ones (Verbatim or Taiyo Yuden). How can I update my firmware?
LIGHTNING UK! Posted February 24, 2010 Posted February 24, 2010 Is it a laptop drive? If so, you have to visit the manufacturers website or contact them.
Recommended Posts