Computer freezes while burning

[McShooter]

I had many problems with the memorex DL DVDs and bought a 50 pack of the 2.4x DL verbatims from singapoirre. I burned a few DVDs successfully but now my computer is freezing up during the burning process. It will either freeze the entire computer to the point where i have to power it off and back on to get out of it.. or ImgBurn will say "time remaining: unknown" during burning. I am running windows XP and I have ran MemTest to verify that the RAM is good. here is a copy of the ImgBurn log from the last time it froze:

 

I 23:12:08 ImgBurn Version 2.4.2.0 started!

I 23:12:08 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 23:12:08 Total Physical Memory: 523,764 KB - Available: 373,676 KB

I 23:12:08 Initialising SPTI...

I 23:12:08 Searching for SCSI / ATAPI devices...

I 23:12:10 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 23:29:21 Operation Started!

I 23:29:21 Source File: E:\Saints Row.iso

I 23:29:21 Source File Sectors: 3,825,631 (MODE1/2048)

I 23:29:21 Source File Size: 7,834,892,288 bytes

I 23:29:21 Source File Volume Identifier: XBOX360

I 23:29:21 Source File Volume Set Identifier: 33479a57

I 23:29:21 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 23:29:21 Source File File System(s): ISO9660, UDF (1.02)

I 23:29:21 Destination Device: [0:0:0] HP DVD Writer 1170d DH22 (F:) (USB)

I 23:29:21 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

I 23:29:21 Destination Media Sectors: 4,173,824

I 23:29:21 Write Mode: DVD

I 23:29:21 Write Type: DAO

I 23:29:21 Write Speed: 2.4x

I 23:29:21 Link Size: Auto

I 23:29:21 Test Mode: No

I 23:29:21 OPC: No

I 23:29:21 BURN-Proof: Enabled

I 23:29:21 User Specified L0 Data Zone Capacity: 1,913,760

I 23:29:52 Filling Buffer... (20 MB)

I 23:29:53 Writing LeadIn...

I 23:29:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825630)

I 23:29:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825630)

I 23:29:54 Writing Layer 0... (LBA: 0 - 1913759)

 

Thanks for reading and any help you can provide

[Cynthia]

There is a later version of the program. Old programs might have issues.

 

Latests chip set drivers for the USB channels installed?

[LIGHTNING UK!]

Put SP3 on too.