imgburndrp Posted February 25, 2010 Posted February 25, 2010 Hi, I have problem burning ISO images with ImgBurn in Windows 7 x64 installation. It's 785G with AHCI mode on + installed RAID drivers from AMD (AHCI drivers lock my computer, upon install). This same setup worked great on Windows XP 32bit (AHCI mode in BIOS + RAID driver in windows). Here is the log: I 19:05:07 ImgBurn Version 2.5.0.0 started! I 19:05:07 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 19:05:07 Total Physical Memory: 3 667 040 KB - Available: 2 685 084 KB I 19:05:07 Initialising SPTI... I 19:05:07 Searching for SCSI / ATAPI devices... I 19:05:07 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 19:06:40 Operation Started! I 19:06:40 Source File: H:\Soft\MS Windows 7 Ultimate RTM\7600.16385.090713-1255_x86fre_client_en-us_Retail_Ultimate-GRMCULFRER_EN_DVD.iso I 19:06:40 Source File Sectors: 1 221 628 (MODE1/2048) I 19:06:40 Source File Size: 2 501 894 144 bytes I 19:06:40 Source File Volume Identifier: GRMCULFRER_EN_DVD I 19:06:40 Source File Volume Set Identifier: 315f0800MS UDFBridge I 19:06:40 Source File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM) I 19:06:40 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:06:40 Source File File System(s): ISO9660 (Bootable); UDF (1.02) I 19:06:40 Destination Device: [2:1:0] TSSTcorp CDDVDW SH-S203D SB01 (D:) (RAID) I 19:06:40 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x; 6x; 8x; 12x; 16x; 18x) I 19:06:40 Destination Media Sectors: 2 295 104 I 19:06:40 Write Mode: DVD I 19:06:40 Write Type: DAO I 19:06:40 Write Speed: 8x I 19:06:40 DVD+R Reserve Track: No I 19:06:40 Link Size: Auto I 19:06:40 Lock Volume: Yes I 19:06:40 Test Mode: No I 19:06:40 OPC: No I 19:06:40 BURN-Proof: Enabled I 19:06:40 Book Type Setting: DVD-ROM I 19:06:40 Filling Buffer... (40 MB) I 19:06:41 Writing LeadIn... I 19:06:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 1221627) I 19:06:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1221627) I 19:11:10 Synchronising Cache... W 19:27:16 I/O Interface 'Debug Mode' has been Enabled! I 19:27:17 [2:1:0] TSSTcorp CDDVDW SH-S203D SB01 (D:) (RAID) I 19:27:17 CDB: 25 00 00 00 00 00 00 00 00 00 I 19:27:17 CDB Interpretation: Read Capacity E 19:27:17 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 E 19:27:17 SENSE Interpretation: Logical Unit not ready, Long Write in progress I 19:27:18 [2:1:0] TSSTcorp CDDVDW SH-S203D SB01 (D:) (RAID) I 19:27:18 CDB: 25 00 00 00 00 00 00 00 00 00 I 19:27:18 CDB Interpretation: Read Capacity E 19:27:18 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 E 19:27:18 SENSE Interpretation: Logical Unit not ready, Long Write in progress I 19:27:19 [2:1:0] TSSTcorp CDDVDW SH-S203D SB01 (D:) (RAID) I 19:27:19 CDB: 25 00 00 00 00 00 00 00 00 00 I 19:27:19 CDB Interpretation: Read Capacity ...keeps repeating endlessly Already trashed two DVDs with this. As the other guy with this problem pointed out here http://forum.imgburn.com/index.php?showtopic=8861 I tried ISO Recorder 3.1 and it worked without problem.
LIGHTNING UK! Posted February 25, 2010 Posted February 25, 2010 Nothing I can do about it, the program is behaving exactly as it should do in that situation. If it's getting invalid response data from the drive then that's something you need take up with your drivers.
imgburndrp Posted February 26, 2010 Author Posted February 26, 2010 I tried with "DVD+R Reserve Track" turned on with DVD+RW disk. Result is the same endless loop.
mmalves Posted February 26, 2010 Posted February 26, 2010 Since Windows 7 has built-in support for AHCI SATA controllers you can install it without using AMD drivers, and maybe later try installing them.
LIGHTNING UK! Posted February 26, 2010 Posted February 26, 2010 The only option I'd try now is the 'Immediate I/O' one. That 'should' get around the issue because the problem is in the polling (and you only poll when Immediate I/O is enabled).
imgburndrp Posted February 26, 2010 Author Posted February 26, 2010 The only option I'd try now is the 'Immediate I/O' one. That 'should' get around the issue because the problem is in the polling (and you only poll when Immediate I/O is enabled). Thanks a lot! It worked I checked "Don't Use Immediate I/O" in Settings - I/O tab and here it is: I 21:48:33 Destination Device: [2:1:0] TSSTcorp CDDVDW SH-S203D SB01 (D:) (RAID)I 21:48:33 Destination Media Type: DVD+RW (Disc ID: INFODISC-A10-01) (Speeds: 2.4x; 4x) I 21:48:33 Destination Media Sectors: 2 295 104 ... I 21:48:35 Writing LeadIn... I 21:48:36 Writing Session 1 of 1... (1 Track, LBA: 0 - 1221627) I 21:48:36 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1221627) I 21:56:07 Synchronising Cache... I 21:56:07 Closing Session... I 21:56:11 Exporting Graph Data... I 21:56:11 Graph Data File: *** I 21:56:11 Export Successfully Completed! I 21:56:11 Operation Successfully Completed! - Duration: 00:07:38 I 21:56:11 Average Write Rate: 5 417 KB/s (3.9x) - Maximum Write Rate: 5 577 KB/s (4.0x) Now the hard part, not to forget turn that option on next clean install
LIGHTNING UK! Posted February 26, 2010 Posted February 26, 2010 Hopefully they'll fix whatever the issue is by then.
Recommended Posts