portalcore1 Posted March 4, 2010 Share Posted March 4, 2010 Hello all, I've searched the forum, and cannot find this problem occurring previously. I'm creating a home video DVD using DVD Styler. I've created an 8.5 Gb folder where the authored dvd video is stored, and used a DVD+R disc and imgburn to write to a disc. The disc plays, but at specific locations (which I believe is stored on the second layer), the video and sound stop for about a second, then continue after skipping the second the video appears to freeze. The original videos don't have this problem, and using Power DVD, it appears that the DVD files on the hard disk don't have the problem. Could it be an issue with dual layer burning and VOB files, or just a case of being unluck where the 2 different dvd players, have the same problem. Also I did read that DVD-R are more compatible with the older dvd players, would this make a difference? Thanks. Link to comment Share on other sites More sharing options...
Sewer Waste Posted March 4, 2010 Share Posted March 4, 2010 Your best bet would be to use Verbatim discs. I know they are more expensive, but they run more smoothly on all dvd drives. Should solve your problem. And if you are using Verbatim's I have no idea what your problem could be. Link to comment Share on other sites More sharing options...
eSkRo Posted March 4, 2010 Share Posted March 4, 2010 (edited) yepp! use Verbatim DVD+R Dual-Layer!! but burn as DVD-ROM Edited March 4, 2010 by eSkRo Link to comment Share on other sites More sharing options...
portalcore1 Posted March 4, 2010 Author Share Posted March 4, 2010 yepp! use Verbatim DVD+R Dual-Layer!! but burn as DVD-ROM Do you mean as a DVD rom type in imgburn, rather than a dvd video disc? And I'll also try Verbatim. Just ran the dvd at work (not meant to really...) using VLC, and it appears to be ok so far, but trying it in another DVD player tonight. Thanks for the prompt responses to both of you. Link to comment Share on other sites More sharing options...
mmalves Posted March 4, 2010 Share Posted March 4, 2010 Post the log from when you've burned that disc (look in ImgBurn's Help menu). Link to comment Share on other sites More sharing options...
portalcore1 Posted March 5, 2010 Author Share Posted March 5, 2010 Post the log from when you've burned that disc (look in ImgBurn's Help menu). Here's the log ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Sunday, 28 February 2010, 19:13:12 ; \\****************************************// ; ; I 18:13:20 ImgBurn Version 2.5.0.0 started! I 18:13:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 18:13:20 Total Physical Memory: 3,076,932 KB - Available: 2,598,340 KB I 18:13:20 Initialising SPTI... I 18:13:20 Searching for SCSI / ATAPI devices... I 18:13:20 Found 1 DVD±RW/RAM! I 18:16:27 Operation Started! I 18:16:27 Building Image Tree... I 18:16:34 Corrected file system selection for DVD Video disc. I 18:16:34 Checking Directory Depth... I 18:16:34 Calculating Totals... I 18:16:34 Preparing Image... W 18:17:51 Unable to find any cells that could be used for the layer break! W 18:17:51 The layer break must be between sectors 2048142 and 2086912. W 18:17:51 Sector 2048142 falls within VTS_01 (Title), which starts at sector 5190. W 18:17:51 Relative to the start of VTS_01 (Title), the layer break must be between sectors 2042952 and 2081722. W 18:17:51 Relative sector 2042952 falls within PGC 1, Cell 9, which starts at relative sector 1799818. W 18:17:51 Relative to the start of Cell 9, try splitting between sectors 243134 (474.87 MB) and 281904 (550.59 MB). I 18:17:51 Checking Path Length... I 18:17:51 Contents: 14 Files, 2 Folders I 18:17:51 Content Type: DVD Video I 18:17:51 Data Type: MODE1/2048 I 18:17:51 File System(s): ISO9660, UDF (1.02) I 18:17:51 Volume Label: WEDDING_DVD I 18:17:51 IFO/BUP 32K Padding: Enabled I 18:17:51 Region Code: 1, 2, 3, 4, 5, 6, 7, 8 I 18:17:51 TV System: PAL I 18:17:51 Size: 8,468,006,912 bytes I 18:17:51 Sectors: 4,134,769 I 18:17:51 Image Size: 8,468,594,688 bytes I 18:17:51 Image Sectors: 4,135,056 I 18:18:07 Operation Successfully Completed! - Duration: 00:01:40 I 18:18:07 Operation Started! I 18:18:07 Source File: -==/\/[bUILD IMAGE]\/\==- I 18:18:07 Source File Sectors: 4,135,056 (MODE1/2048) I 18:18:07 Source File Size: 8,468,594,688 bytes I 18:18:07 Source File Volume Identifier: WEDDING_DVD I 18:18:07 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 18:18:07 Source File Implementation Identifier: ImgBurn I 18:18:07 Source File File System(s): ISO9660, UDF (1.02) I 18:18:07 Destination Device: [1:0:0] TSSTcorp CDDVDW SN-S083C SB00 (D:) (ATA) I 18:18:07 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 3x, 4x, 6x) I 18:18:07 Destination Media Sectors: 4,173,824 I 18:18:07 Write Mode: DVD I 18:18:07 Write Type: DAO I 18:18:07 Write Speed: 2.4x I 18:18:07 Link Size: Auto I 18:18:07 Lock Volume: Yes I 18:18:07 Test Mode: No I 18:18:07 OPC: No I 18:18:07 BURN-Proof: Enabled W 18:18:09 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x) I 18:18:09 Book Type Setting: DVD-ROM I 18:18:09 Optimal L0 Data Zone Capacity: 2,067,536 I 18:18:09 Optimal L0 Data Zone Method: ECC Block Boundary I 18:18:56 Set L0 Data Zone Capacity Succeeded! I 18:18:57 Filling Buffer... (40 MB) I 18:18:58 Writing LeadIn... I 18:19:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 4135055) I 18:19:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4135055) I 18:19:00 Writing Layer 0... (LBA: 0 - 2067535) I 18:35:56 Writing Layer 1... (LBA: 2067536 - 4135055) I 18:53:44 Synchronising Cache... I 18:53:48 Closing Track... I 18:53:50 Finalising Disc... I 18:54:35 Exporting Graph Data... I 18:54:35 Graph Data File: C:\Documents and Settings\Chris\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SN-S083C_SB00_28-FEBRUARY-2010_18-18_RICOHJPN-D01-67_2.4x.ibg I 18:54:35 Export Successfully Completed! I 18:54:35 Operation Successfully Completed! - Duration: 00:36:28 I 18:54:35 Average Write Rate: 3,970 KB/s (2.9x) - Maximum Write Rate: 4,227 KB/s (3.1x) I 18:54:35 Cycling Tray before Verify... W 18:55:01 Waiting for device to become ready... I 18:55:14 Device Ready! I 18:55:22 Operation Started! I 18:55:22 Source Device: [1:0:0] TSSTcorp CDDVDW SN-S083C SB00 (D:) (ATA) I 18:55:22 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 3x, 4x, 6x) I 18:55:22 Image File: -==/\/[bUILD IMAGE]\/\==- I 18:55:22 Image File Sectors: 4,135,056 (MODE1/2048) I 18:55:22 Image File Size: 8,468,594,688 bytes I 18:55:22 Image File Volume Identifier: WEDDING_DVD I 18:55:22 Image File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 18:55:22 Image File Implementation Identifier: ImgBurn I 18:55:22 Image File File System(s): ISO9660, UDF (1.02) I 18:55:22 Read Speed (Data/Audio): MAX / MAX I 18:55:22 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4135055) I 18:55:22 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4135055) I 18:55:22 Verifying Layer 0... (LBA: 0 - 2067535) I 19:04:05 Verifying Layer 1... (LBA: 2067536 - 4135055) I 19:12:48 Exporting Graph Data... I 19:12:48 Graph Data File: C:\Documents and Settings\Chris\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SN-S083C_SB00_28-FEBRUARY-2010_18-18_RICOHJPN-D01-67_2.4x.ibg I 19:12:48 Export Successfully Completed! I 19:12:48 Operation Successfully Completed! - Duration: 00:17:26 I 19:12:48 Average Verify Rate: 7,906 KB/s (5.7x) - Maximum Verify Rate: 11,474 KB/s (8.3x) I 19:13:12 Close Request Acknowledged I 19:13:12 Closing Down... I 19:13:12 Shutting down SPTI... I 19:13:12 ImgBurn closed! Link to comment Share on other sites More sharing options...
Cynthia Posted March 5, 2010 Share Posted March 5, 2010 I've searched the forum, and cannot find this problem occurring previously. http://forum.imgburn.com/index.php?showtopic=6376 Link to comment Share on other sites More sharing options...
Recommended Posts