donnie999 Posted March 7, 2010 Share Posted March 7, 2010 Hi all I am having trouble with my computer or imgburn. I contracted a computer virus and i had to do a system restore to get it back right. I also had the problem of my programs not opening. I had to choose a program to open with. I then had to get the regeditfix. That restored my programs but imgburn will not burn like it use to. The max speed is between 1.7 and 2.4. I tried deleting the channels in the device manager. I downloaded the new version and reset the settings. I have been using the same media for a while and it always burned with very little problems. My question is how do i get it back up to burning at a write speed or write rate of 8.0? Please and Thank You Don Also i run scans of my computer and it doesnt detect any viruses if this info helps. I 13:08:12 ImgBurn Version 2.5.0.0 started! I 13:08:12 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 13:08:12 Total Physical Memory: 1,046,620 KB - Available: 238,760 KB W 13:08:12 SPTD can have a detrimental effect on drive performance. I 13:08:12 Initialising SPTI... I 13:08:12 Searching for SCSI / ATAPI devices... I 13:08:13 Found 1 DVD-ROM and 1 DVD±RW! I 13:08:25 Operation Started! I 13:08:25 Building Image Tree... I 13:08:26 Checking Directory Depth... I 13:08:26 Calculating Totals... I 13:08:26 Preparing Image... I 13:08:26 Checking Path Length... I 13:08:26 Contents: 13 Files, 2 Folders I 13:08:26 Content Type: DVD Video I 13:08:26 Data Type: MODE1/2048 I 13:08:26 File System(s): ISO9660, UDF (1.02) I 13:08:26 Volume Label: veins-percyjack-repack-1 I 13:08:26 IFO/BUP 32K Padding: Enabled I 13:08:26 Region Code: 1, 2, 3, 4, 5, 6, 8 I 13:08:27 TV System: NTSC I 13:08:27 Size: 2,527,000,576 bytes I 13:08:27 Sectors: 1,233,887 I 13:08:27 Image Size: 2,527,592,448 bytes I 13:08:27 Image Sectors: 1,234,176 I 13:08:27 Operation Successfully Completed! - Duration: 00:00:01 I 13:08:27 Operation Started! I 13:08:27 Source File: -==/\/[bUILD IMAGE]\/\==- I 13:08:27 Source File Sectors: 1,234,176 (MODE1/2048) I 13:08:27 Source File Size: 2,527,592,448 bytes I 13:08:27 Source File Volume Identifier: veins-percyjack-repack-1 I 13:08:27 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 13:08:27 Source File Implementation Identifier: ImgBurn I 13:08:27 Source File File System(s): ISO9660, UDF (1.02) I 13:08:27 Destination Device: [0:1:0] PHILIPS DVD+-RW DVD8701 5D24 (E:) (ATA) I 13:08:27 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x, 8x, 12x, 16x) I 13:08:27 Destination Media Sectors: 2,295,104 I 13:08:27 Write Mode: DVD I 13:08:27 Write Type: DAO I 13:08:27 Write Speed: MAX I 13:08:27 DVD+R Reserve Track: No I 13:08:27 Link Size: Auto I 13:08:27 Lock Volume: Yes I 13:08:27 Test Mode: No I 13:08:27 OPC: No I 13:08:27 BURN-Proof: Enabled I 13:08:28 Filling Buffer... (40 MB) I 13:08:29 Writing LeadIn... I 13:08:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 1234175) I 13:08:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1234175) I 13:21:51 Synchronising Cache... I 13:21:52 Closing Track... I 13:21:55 Finalising Disc... I 13:22:34 Exporting Graph Data... I 13:22:34 Graph Data File: C:\Documents and Settings\Donald\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_SUNDAY-MARCH-07-2010_1-08_PM_CMC_MAG-M01-00_MAX.ibg I 13:22:34 Export Successfully Completed! I 13:22:34 Operation Successfully Completed! - Duration: 00:14:06 I 13:22:34 Average Write Rate: 3,136 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 13:22:34 Cycling Tray before Verify... W 13:22:42 Waiting for device to become ready... I 13:22:49 Device Ready! I 13:22:50 Operation Started! I 13:22:50 Source Device: [0:1:0] PHILIPS DVD+-RW DVD8701 5D24 (E:) (ATA) I 13:22:50 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) I 13:22:50 Image File: -==/\/[bUILD IMAGE]\/\==- I 13:22:50 Image File Sectors: 1,234,176 (MODE1/2048) I 13:22:50 Image File Size: 2,527,592,448 bytes I 13:22:50 Image File Volume Identifier: veins-percyjack-repack-1 I 13:22:50 Image File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 13:22:50 Image File Implementation Identifier: ImgBurn I 13:22:50 Image File File System(s): ISO9660, UDF (1.02) I 13:22:50 Read Speed (Data/Audio): MAX / MAX I 13:22:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1234175) I 13:22:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1234175) I 13:29:22 Exporting Graph Data... I 13:29:22 Graph Data File: C:\Documents and Settings\Donald\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_SUNDAY-MARCH-07-2010_1-08_PM_CMC_MAG-M01-00_MAX.ibg I 13:29:22 Export Successfully Completed! I 13:29:22 Operation Successfully Completed! - Duration: 00:06:32 I 13:29:22 Average Verify Rate: 6,312 KB/s (4.6x) - Maximum Verify Rate: 12,624 KB/s (9.1x) Link to comment Share on other sites More sharing options...
Cynthia Posted March 7, 2010 Share Posted March 7, 2010 The speeds are to high to be a DMA issue. Could you upload this file? I 13:29:22 Graph Data File: C:\Documents and Settings\Donald\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_SUNDAY-MARCH-07-2010_1-08_PM_CMC_MAG-M01-00_MAX.ibg Not the best media, could be that the burner is reverting to a lower write speed strategy due to that. The low average verify rate might also reflect this. Link to comment Share on other sites More sharing options...
donnie999 Posted March 8, 2010 Author Share Posted March 8, 2010 (edited) I hope this is what you were looking for. If you can help me get back to a 8.0 that would be so much appreciated. Thanks EDIT: No, that's not what she was looking for The speeds are to high to be a DMA issue. Could you upload this file? I 13:29:22 Graph Data File: C:\Documents and Settings\Donald\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_SUNDAY-MARCH-07-2010_1-08_PM_CMC_MAG-M01-00_MAX.ibg Not the best media, could be that the burner is reverting to a lower write speed strategy due to that. The low average verify rate might also reflect this. Edited March 8, 2010 by LIGHTNING UK! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 8, 2010 Share Posted March 8, 2010 *attach* the file to the post, don't copy + paste from it. Have you tried actually setting the speed to 8x or 12x to see if that makes a difference? Link to comment Share on other sites More sharing options...
donnie999 Posted March 8, 2010 Author Share Posted March 8, 2010 I will attach the file, and yes sir i have set the write speed to 8, 12 and max and it doesnt go above 4.0. Thanks for your help *attach* the file to the post, don't copy + paste from it. Have you tried actually setting the speed to 8x or 12x to see if that makes a difference? PHILIPS_DVD+-RW_DVD8701_5D24_SUNDAY-MARCH-07-2010_1-08_PM_CMC_MAG-M01-00_MAX.ibg Link to comment Share on other sites More sharing options...
Cynthia Posted March 8, 2010 Share Posted March 8, 2010 I would try with some better quality media to see if you can get the speed up. It looks as it has a hard time reading the later part of the disc. Link to comment Share on other sites More sharing options...
donnie999 Posted March 12, 2010 Author Share Posted March 12, 2010 I used different media and its burning fine now thank you all. Now i have another issue. everytime i put a new disc in and burn another imgburn program opens. any ideas as to why? I would try with some better quality media to see if you can get the speed up. It looks as it has a hard time reading the later part of the disc. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 12, 2010 Share Posted March 12, 2010 look at the autoplay options within your OS. Link to comment Share on other sites More sharing options...
Recommended Posts