Moldat Posted March 12, 2010 Share Posted March 12, 2010 Hello and good evening so i bought verbatim media with a burnspeed of 8x. This is where my problems started, i used to burn xbox backups no problem with the old 2.4x ones but the only store close by that sells these only have 8x now. well any way, at first i tried to burn a backup, and failed right off the bat, destroying the media. i did some reading and tried burning at 8x speed, it burned the first layer and then failed again. i did MORE reading and realized i need to update my driver's firmware, so i did just that. what happens now, is the burn proccess goes smoothly all the way trough, both layers burn without a problem, but then when its finalising the disk..... I 21:52:50 ImgBurn Version 2.5.0.0 started! I 21:52:50 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:52:50 Total Physical Memory: 1,047,856 KB - Available: 689,700 KB W 21:52:50 SPTD can have a detrimental effect on drive performance. I 21:52:50 Initialising SPTI... I 21:52:50 Searching for SCSI / ATAPI devices... I 21:52:50 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 21:54:16 Operation Started! I 21:54:16 Source File: H:\Assassins.Creed.II.PAL.XBOX360-DNL\IMAGE.dvd I 21:54:16 Source File Sectors: 3,827,488 (MODE1/2048) I 21:54:16 Source File Size: 7,838,695,424 bytes I 21:54:16 Source File Volume Identifier: DVD_ROM I 21:54:16 Source File Volume Set Identifier: fd244000MS UDFBridge I 21:54:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:54:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:54:16 Source File File System(s): ISO9660, UDF (1.50) I 21:54:16 Destination Device: [1:0:0] Optiarc DVD RW AD-7170A 1.05 (I:) (ATA) I 21:54:16 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x) I 21:54:16 Destination Media Sectors: 4,173,824 I 21:54:16 Write Mode: DVD I 21:54:16 Write Type: DAO I 21:54:16 Write Speed: 2.4x I 21:54:16 Link Size: Auto I 21:54:16 Lock Volume: Yes I 21:54:16 Test Mode: No I 21:54:16 OPC: No I 21:54:16 BURN-Proof: Enabled I 21:54:16 Book Type Setting: DVD-ROM I 21:54:17 User Specified L0 Data Zone Capacity: 1,913,760 I 21:54:53 Set L0 Data Zone Capacity Succeeded! I 21:54:54 Filling Buffer... (40 MB) I 21:54:55 Writing LeadIn... I 21:54:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 21:54:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 21:54:56 Writing Layer 0... (LBA: 0 - 1913759) I 22:14:38 Writing Layer 1... (LBA: 1913760 - 3827487) I 22:34:34 Synchronising Cache... I 22:34:35 Closing Track... I 22:35:07 Finalising Disc... W 22:35:38 Potential 'WaitImmediateIO' Deferred Error - (51%, 0/3) - No Seek Complete W 22:35:38 Finalise Disc Failed! - Reason: No Seek Complete W 22:35:38 Retrying (1 of 3)... W 22:36:05 Potential 'WaitImmediateIO' Deferred Error - (45%, 0/3) - No Seek Complete W 22:36:05 Retrying (2 of 3)... W 22:36:38 Potential 'WaitImmediateIO' Deferred Error - (57%, 0/3) - No Seek Complete W 22:36:38 Retry Failed - Reason: No Seek Complete W 22:36:38 Retrying (3 of 3)... W 22:37:08 Potential 'WaitImmediateIO' Deferred Error - (49%, 0/3) - No Seek Complete W 22:37:08 Retry Failed - Reason: No Seek Complete W 23:20:15 Retrying (4)... W 23:20:42 Potential 'WaitImmediateIO' Deferred Error - (45%, 0/3) - No Seek Complete W 23:20:42 Retry Failed - Reason: No Seek Complete W 23:20:48 Retrying (5)... W 23:21:24 Potential 'WaitImmediateIO' Deferred Error - (61%, 0/3) - No Seek Complete W 23:21:24 Retry Failed - Reason: No Seek Complete W 23:21:26 Retrying (6)... W 23:21:57 Potential 'WaitImmediateIO' Deferred Error - (52%, 0/3) - No Seek Complete W 23:21:57 Retry Failed - Reason: No Seek Complete W 23:22:03 Retrying (7)... W 23:22:34 Potential 'WaitImmediateIO' Deferred Error - (52%, 0/3) - No Seek Complete W 23:22:34 Retry Failed - Reason: No Seek Complete W 23:22:39 Retrying (8)... W 23:23:08 Potential 'WaitImmediateIO' Deferred Error - (49%, 0/3) - No Seek Complete W 23:23:08 Retry Failed - Reason: No Seek Complete W 23:26:57 Retrying (9)... im really out of ideas. help would be appreciated Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 12, 2010 Share Posted March 12, 2010 Have you tried the other write speeds since updating the firmware? You could try cleaning the drive with a cleaning disc. Link to comment Share on other sites More sharing options...
Moldat Posted March 13, 2010 Author Share Posted March 13, 2010 Have you tried the other write speeds since updating the firmware? You could try cleaning the drive with a cleaning disc. nope, burrning at 2.4x Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 13, 2010 Share Posted March 13, 2010 Ok so give the other speeds a shot and try cleaning the drive. Link to comment Share on other sites More sharing options...
Moldat Posted March 13, 2010 Author Share Posted March 13, 2010 Ok so give the other speeds a shot and try cleaning the drive. allright, what speed should i try? im running out od media here Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 13, 2010 Share Posted March 13, 2010 I 21:54:16 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x) They're what the drive supports and you say you've already tried 2.4x. I'm sure you can work out what's left Link to comment Share on other sites More sharing options...
Moldat Posted March 13, 2010 Author Share Posted March 13, 2010 :S well 8x just failed right away, i have 4 dvd's left, its Saturday, and i have a feeling that if 2.4x got to the end but couldn't finalize, and 8x failed before even starting... 4x and 6x chances are slim :< what else can i do? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 13, 2010 Share Posted March 13, 2010 All of those speeds should be working fine if the drive and media are working as well and of the quality they should be. I'd certainly give 4x a go. Have you tried cleaning the drive yet? (as suggested several times already!) You should give another spindle of discs a try. If you run into the same problems with those and cleaning the drive hasn't helped, invest in a new one. Link to comment Share on other sites More sharing options...
Moldat Posted March 13, 2010 Author Share Posted March 13, 2010 i did clean my drive, forgot to mention it any way, this is so annoying, i mean i can buy a new drive, but every thing worked perfectly before these 8x showed up and ruined everything for me =/ Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 13, 2010 Share Posted March 13, 2010 You could always try to buy some 2.4x Verbatims via the Internet, but if that's not an option and you're left with 8x Verbs or nothing, you may have no choice but to get another drive. Link to comment Share on other sites More sharing options...
Recommended Posts