nhoj Posted March 14, 2010 Posted March 14, 2010 i am new to this and each time i try to burn iso file to disc i get i/o error at 50% i have tried a few times and get the same error message every time it is not just one file i have had this problem with so would be greatful if someone could let me know what i am doing wrong
Cynthia Posted March 14, 2010 Posted March 14, 2010 Can you post a log of such a burn? You'll find it here: Main Menu -> Help -> ImgBurn Logs
nhoj Posted March 16, 2010 Author Posted March 16, 2010 Can you post a log of such a burn? You'll find it here: Main Menu -> Help -> ImgBurn Logs I 14:22:48 ImgBurn Version 2.5.0.0 started! I 14:22:48 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 14:22:48 Total Physical Memory: 522,224 KB - Available: 182,520 KB I 14:22:48 Initialising SPTI... I 14:22:48 Searching for SCSI / ATAPI devices... I 14:22:48 Found 1 DVD±RW! I 14:32:37 Operation Started! I 14:32:37 Source File: C:\Documents and Settings\6\Desktop\all-battlefield-bc2.dvd I 14:32:37 Source File Sectors: 3,827,488 (MODE1/2048) I 14:32:37 Source File Size: 7,838,695,424 bytes I 14:32:37 Source File Volume Identifier: DVD_ROM I 14:32:37 Source File Volume Set Identifier: ec67c000MS UDFBridge I 14:32:37 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:32:37 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:32:37 Source File File System(s): ISO9660, UDF (1.50) I 14:32:37 Destination Device: [1:0:0] PHILIPS DVD+-RW DVD8701 5D24 (D:) (ATA) I 14:32:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) I 14:32:37 Destination Media Sectors: 4,173,824 I 14:32:37 Write Mode: DVD I 14:32:37 Write Type: DAO I 14:32:37 Write Speed: 2.4x I 14:32:37 Link Size: Auto I 14:32:37 Lock Volume: Yes I 14:32:37 Test Mode: No I 14:32:37 OPC: No I 14:32:37 BURN-Proof: Enabled I 14:32:38 Optimal L0 Data Zone Capacity: 1,913,760 I 14:32:38 Optimal L0 Data Zone Method: Copied From Original Disc I 14:32:38 Set L0 Data Zone Capacity Succeeded! I 14:32:38 Filling Buffer... (20 MB) I 14:32:39 Writing LeadIn... I 14:32:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 14:32:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 14:32:50 Writing Layer 0... (LBA: 0 - 1913759) I 14:52:56 Writing Layer 1... (LBA: 1913760 - 3827487) W 14:53:25 Failed to Write Sectors 1914080 - 1914111 - Reason: Write Error W 14:53:25 Retrying (1 of 20)... W 14:53:25 Retry Failed - Reason: Invalid Address For Write W 14:53:25 Retrying (2 of 20)... W 14:53:25 Retry Failed - Reason: Invalid Address For Write W 14:53:25 Retrying (3 of 20)... W 14:53:25 Retry Failed - Reason: Invalid Address For Write W 14:53:25 Retrying (4 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (5 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (6 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (7 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (8 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (9 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (10 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (11 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (12 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (13 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (14 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (15 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (16 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (17 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (18 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (19 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:53:26 Retrying (20 of 20)... W 14:53:26 Retry Failed - Reason: Invalid Address For Write W 14:55:22 Retrying (21)... W 14:55:22 Retry Failed - Reason: Invalid Address For Write W 14:55:26 Retrying (22)... W 14:55:26 Retry Failed - Reason: Invalid Address For Write E 14:55:28 Failed to Write Sectors 1914080 - 1914111 - Reason: Write Error E 14:55:28 Next Writable Address: 1913760 I 14:55:28 Synchronising Cache... W 14:55:39 User opted to skip the 'Close Track/Session/Disc' functions. E 14:55:39 Failed to Write Image! I 14:55:40 Exporting Graph Data... I 14:55:40 Graph Data File: C:\Documents and Settings\6\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_14-MARCH-2010_14-32_RICOHJPN-D01-67_2.4x.ibg I 14:55:40 Export Successfully Completed! E 14:55:40 Operation Failed! - Duration: 00:23:02 I 14:55:40 Average Write Rate: 2,821 KB/s (2.0x) - Maximum Write Rate: 3,360 KB/s (2.4x)
LIGHTNING UK! Posted March 16, 2010 Posted March 16, 2010 Try the firmware update. http://www.firmwarehq.com/Philips/DVD8701/files.html That's basically a BenQ 1640 drive I believe. You'd do well to stick with Verbatim 2.4x discs (MKM-001-00 dye). As they can be hard to get hold of now (the 8x MKM-003-00 have taken over!), you might need to invest in a new drive (keep that one for scanning though).
nhoj Posted March 18, 2010 Author Posted March 18, 2010 Try the firmware update. http://www.firmwarehq.com/Philips/DVD8701/files.html That's basically a BenQ 1640 drive I believe. You'd do well to stick with Verbatim 2.4x discs (MKM-001-00 dye). As they can be hard to get hold of now (the 8x MKM-003-00 have taken over!), you might need to invest in a new drive (keep that one for scanning though). as i said when i first asked the question i am new to this and dont have a clue what your answer means.
nhoj Posted March 19, 2010 Author Posted March 19, 2010 Try the firmware update. http://www.firmwarehq.com/Philips/DVD8701/files.html That's basically a BenQ 1640 drive I believe. You'd do well to stick with Verbatim 2.4x discs (MKM-001-00 dye). As they can be hard to get hold of now (the 8x MKM-003-00 have taken over!), you might need to invest in a new drive (keep that one for scanning though). as i said when i first asked the question i am new to this and dont have a clue what your answer means. i take it that after posting the log for the error i am getting that no one can help me sort it out in laymans terms
mmalves Posted March 19, 2010 Posted March 19, 2010 We'd just be rewriting what LUK has already posted. Run that firmware update, and if it doesn't work, then you'll need to buy a new burner. It's as simple as that, really.
LIGHTNING UK! Posted March 19, 2010 Posted March 19, 2010 Sorry, I don't do laymans terms very well... but there's nothing stopping you from doing some research and learning what the stuff you don't understand actually means. Did you try the firmware update as suggested? You know, visit the website, download the file, unzip it, run it, follow the onscreen instructions etc. I 14:32:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) The discs you're using use the 'RICOHJPN-D01-67' dye. The 'brand' name stamped on discs doesn't mean anything, it all comes down to how they're actually made and the dye/MID (Manufacturer ID or Disc ID) they use. The ones you *should* be using use the MKM-001-00 (2.4x speed) or MKM-003-00 (8x speed) dye. AFAIK, only Verbatim uses those dyes so you need to buy yourself some Verbatim double layer discs. With your particular drive, you really need the 2.4x ones (MKM-001-00 dye) as I don't think the firmware handles the 8x (MKM-003-00 dye) very well.
nhoj Posted March 20, 2010 Author Posted March 20, 2010 Sorry, I don't do laymans terms very well... but there's nothing stopping you from doing some research and learning what the stuff you don't understand actually means. Did you try the firmware update as suggested? You know, visit the website, download the file, unzip it, run it, follow the onscreen instructions etc. I 14:32:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) The discs you're using use the 'RICOHJPN-D01-67' dye. The 'brand' name stamped on discs doesn't mean anything, it all comes down to how they're actually made and the dye/MID (Manufacturer ID or Disc ID) they use. The ones you *should* be using use the MKM-001-00 (2.4x speed) or MKM-003-00 (8x speed) dye. AFAIK, only Verbatim uses those dyes so you need to buy yourself some Verbatim double layer discs. With your particular drive, you really need the 2.4x ones (MKM-001-00 dye) as I don't think the firmware handles the 8x (MKM-003-00 dye) very well. if i use the verbatim discs would they work without the firmware download as i have tryed this and still get the same error
LIGHTNING UK! Posted March 20, 2010 Posted March 20, 2010 If you can get the 2.4x MKM-001-00 dye Verbatims discs, yes it *should* work.
nhoj Posted March 21, 2010 Author Posted March 21, 2010 Sorry, I don't do laymans terms very well... but there's nothing stopping you from doing some research and learning what the stuff you don't understand actually means. Did you try the firmware update as suggested? You know, visit the website, download the file, unzip it, run it, follow the onscreen instructions etc. I 14:32:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) The discs you're using use the 'RICOHJPN-D01-67' dye. The 'brand' name stamped on discs doesn't mean anything, it all comes down to how they're actually made and the dye/MID (Manufacturer ID or Disc ID) they use. The ones you *should* be using use the MKM-001-00 (2.4x speed) or MKM-003-00 (8x speed) dye. AFAIK, only Verbatim uses those dyes so you need to buy yourself some Verbatim double layer discs. do you know a good place to get these With your particular drive, you really need the 2.4x ones (MKM-001-00 dye) as I don't think the firmware handles the 8x (MKM-003-00 dye) very well. if i use the verbatim discs would they work without the firmware download as i have tryed this and still get the same error
nhoj Posted March 22, 2010 Author Posted March 22, 2010 If you can get the 2.4x MKM-001-00 dye Verbatims discs, yes it *should* work. do you know of a good supplier of these discs
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now