kefkuh Posted March 26, 2010 Share Posted March 26, 2010 Hello imgburn forums. I've been trying to burn xbox 360 games for awhile now, and i ran into the problem. Here is the log... I 02:21:50 ImgBurn Version 2.5.1.0 started!I 02:21:50 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 02:21:50 Total Physical Memory: 2,095,196 KB - Available: 1,636,088 KB I 02:21:50 Initialising SPTI... I 02:21:50 Searching for SCSI / ATAPI devices... I 02:21:50 -> Drive 1 - Info: TSSTcorp DVD-ROM TS-H352C DE02 (D:) (ATA) I 02:21:50 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H21N A105 (E:) (ATA) I 02:21:50 Found 1 DVD-ROM and 1 DVD±RW! W 02:22:17 I/O Interface has been changed! I 02:22:17 Shutting down SPTI... I 02:22:17 Initialising Patin-Couffin... I 02:22:17 Patin-Couffin - VSO Software - Version 1.36.0.0 - Internal Revision 36 I 02:22:17 Searching for SCSI / ATAPI devices... I 02:22:17 -> Drive 1 - Info: HL-DT-ST DVD+-RW GSA-H21N A105 (E:) (ATA) I 02:22:17 -> Drive 2 - Info: TSSTcorp DVD-ROM TS-H352C DE02 (D:) (ATA) I 02:22:17 Found 1 DVD-ROM and 1 DVD±RW! I 02:23:37 Operation Started! I 02:23:37 Source File: C:\Program Files\JDownloader\downloads\Soul Calibur IV.dvd I 02:23:37 Source File Sectors: 3,825,924 (MODE1/2048) I 02:23:37 Source File Size: 7,835,492,352 bytes I 02:23:37 Source File Volume Identifier: XGD2DVD_NTSC I 02:23:37 Source File Volume Set Identifier: 34672923 I 02:23:37 Source File Implementation Identifier: Sonic Scenarist 3.1 I 02:23:37 Source File File System(s): ISO9660, UDF (1.02) I 02:23:37 Destination Device: [1:1:0] HL-DT-ST DVD+-RW GSA-H21N A105 (E:) (ATA) I 02:23:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 02:23:37 Destination Media Sectors: 4,173,824 I 02:23:37 Write Mode: DVD I 02:23:37 Write Type: DAO I 02:23:37 Write Speed: 2x I 02:23:37 Link Size: Auto I 02:23:37 Lock Volume: Yes I 02:23:37 Test Mode: No I 02:23:37 OPC: No I 02:23:37 BURN-Proof: Enabled W 02:23:37 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x) I 02:23:37 Book Type Setting: N/A I 02:23:37 User Specified L0 Data Zone Capacity: 1,913,760 I 02:23:37 Set L0 Data Zone Capacity Succeeded! I 02:23:37 Filling Buffer... (40 MB) I 02:23:38 Writing LeadIn... I 02:24:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 02:24:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 02:24:01 Writing Layer 0... (LBA: 0 - 1913759) W 02:28:38 Failed to Write Sectors 721568 - 721599 - Reason: Unknown (Vendor Unique) (ASC: 0x80, ASCQ: 0x04) W 02:28:38 Retrying (1 of 20)... W 02:28:38 Retry Failed - Reason: No Seek Complete W 02:28:38 Retrying (2 of 20)... W 02:28:38 Retry Failed - Reason: Invalid Address For Write W 02:28:38 Retrying (3 of 20)... W 02:28:38 Retry Failed - Reason: Invalid Address For Write W 02:28:38 Retrying (4 of 20)... W 02:28:38 Retry Failed - Reason: Invalid Address For Write W 02:28:38 Retrying (5 of 20)... W 02:28:38 Retry Failed - Reason: Invalid Address For Write W 02:28:38 Retrying (6 of 20)... W 02:28:38 Retry Failed - Reason: Invalid Address For Write W 02:28:38 Retrying (7 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (8 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (9 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (10 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (11 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (12 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (13 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (14 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (15 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (16 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (17 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (18 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (19 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write W 02:28:39 Retrying (20 of 20)... W 02:28:39 Retry Failed - Reason: Invalid Address For Write E 02:28:45 Failed to Write Sectors 721568 - 721599 - Reason: Unknown (Vendor Unique) (ASC: 0x80, ASCQ: 0x04) E 02:28:45 Next Writable Address: 0 I 02:28:45 Synchronising Cache... W 02:28:48 User opted to skip the 'Close Track/Session/Disc' functions. E 02:28:48 Failed to Write Image! I 02:28:48 Exporting Graph Data... I 02:28:48 Graph Data File: C:\Documents and Settings\Trevor1\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GSA-H21N_A105_FRIDAY-MARCH-26-2010_2-23_AM_RICOHJPN-D01-67_2x.ibg I 02:28:48 Export Successfully Completed! E 02:28:48 Operation Failed! - Duration: 00:05:11 I 02:28:48 Average Write Rate: 5,081 KB/s (3.7x) - Maximum Write Rate: 5,618 KB/s (4.1x) Also, can someone tell me if my disc drives are even usable for this? Here are the model numbers for them GSA-H21N TS-h352c/dehl Also, if i fail a burn, is the disc ruined? Reply's are extremely appreciated, thank you in advance for everything! Link to comment Share on other sites More sharing options...
eSkRo Posted March 26, 2010 Share Posted March 26, 2010 (edited) #1--> install the latest firmware (B109) for your burner --> http://fwd4.me/J5C #2--> Buy a DVD Lens Cleaner & clean your burner with it --> http://fwd4.me/J5D #3--> use nothing but Verbatim 2.4x DVD+R Dual Layer discs --> http://fwd4.me/J5G #4--> what your burner can burn is found in ImgBurn --> http://fwd4.me/J5H Edited March 26, 2010 by eSkRo Link to comment Share on other sites More sharing options...
mmalves Posted March 26, 2010 Share Posted March 26, 2010 Put the I/O interface back to SPTI, or better yet, reset the program's settings to their default values. Try burning at 6x or 8x. You should also read this -> http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
eSkRo Posted March 26, 2010 Share Posted March 26, 2010 Nice mmalves!! i was looking for that Thread yesterday to post here for him! thanks! Link to comment Share on other sites More sharing options...
kefkuh Posted March 26, 2010 Author Share Posted March 26, 2010 #1--> install the latest firmware (B109) for your burner --> http://fwd4.me/J5C #2--> Buy a DVD Lens Cleaner & clean your burner with it --> http://fwd4.me/J5D #3--> use nothing but Verbatim 2.4x DVD+R Dual Layer discs --> http://fwd4.me/J5G #4--> what your burner can burn is found in ImgBurn --> http://fwd4.me/J5H Updated my firmware, found out my burner is compatible ...still no dice My dvd's are Memorex, DVD+R 8x|8.5gb|240 min, does it really make a difference if they are Verbatim? And i didn't get around to cleaning it, but i honestly doubt that's the issue... Any other suggestions before i resort to buying a new drive? Also, can you recommend one? Link to comment Share on other sites More sharing options...
kefkuh Posted March 26, 2010 Author Share Posted March 26, 2010 Put the I/O interface back to SPTI, or better yet, reset the program's settings to their default values. Try burning at 6x or 8x. You should also read this -> http://forum.imgburn.com/index.php?showtopic=8000 Good link, it basically told me my disc drive and/or discs im using are garbage. Any other suggestions? Link to comment Share on other sites More sharing options...
mmalves Posted March 27, 2010 Share Posted March 27, 2010 Yeah, read that again and this time pay attention as there's more information there that could help you solve your problem. Link to comment Share on other sites More sharing options...
kefkuh Posted March 27, 2010 Author Share Posted March 27, 2010 Yeah, read that again and this time pay attention as there's more information there that could help you solve your problem. Yeah... I've done pretty much everything that thread said to do, except use those Verbatim discs. I'm just asking if there's anything else that the thread doesn't cover before i spend money again. Link to comment Share on other sites More sharing options...
kefkuh Posted March 31, 2010 Author Share Posted March 31, 2010 So anyone have any other suggestions? I've done pretty much everything! Also, i recently found out that WMP isn't even detecting my blank CD's when i try to burn? #092; (last time i burned a cd with wmp was a few months ago) Link to comment Share on other sites More sharing options...
mmalves Posted March 31, 2010 Share Posted March 31, 2010 Try with the Verbatim 2.4x blanks, and if it doesn't work with them, then you can be sure your burner is dead. Link to comment Share on other sites More sharing options...
kefkuh Posted April 3, 2010 Author Share Posted April 3, 2010 Ok, i can honestly say i tried everything. My burner simply won't burn DVD's Can anyone recommend a good DVD burner? Link to comment Share on other sites More sharing options...
Recommended Posts