Wakulla Dive Center Posted March 29, 2010 Share Posted March 29, 2010 New install First attempt to burn an ISO file to new CD-R Fiddled with a few settings with no success Used "Tools-Settings-Restore defaults Received same error message set Where di I go from here? Log Follows: I 09:35:06 ImgBurn Version 2.5.1.0 started! I 09:35:06 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 09:35:06 Total Physical Memory: 523,244 KB - Available: 127,188 KB I 09:35:06 Initialising SPTI... I 09:35:06 Searching for SCSI / ATAPI devices... I 09:35:07 -> Drive 1 - Info: QSI DVD/CDRW SBW-081 NA02 (D:) (ATA) I 09:35:07 Found 1 DVD-ROM/CD-RW! I 10:06:55 Operation Started! I 10:06:55 Source File: F:\VisualPlusTemp\VisualPlus v3.7.4.0.iso I 10:06:55 Source File Sectors: 21,008 (MODE1/2048) I 10:06:55 Source File Size: 43,024,384 bytes I 10:06:55 Source File Volume Identifier: VisualPlus 3.7.4.0 I 10:06:55 Source File Volume Set Identifier: 091123_1307 I 10:06:55 Source File Application Identifier: Roxio Burn Engine 2.0.2 I 10:06:55 Source File Implementation Identifier: RoxioBurnEngine 2.0.2 I 10:06:55 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 10:06:55 Destination Device: [1:0:0] QSI DVD/CDRW SBW-081 NA02 (D:) (ATA) I 10:06:55 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) (Speeds: 8x) I 10:06:55 Destination Media Sectors: 359,847 I 10:06:55 Write Mode: CD I 10:06:55 Write Type: SAO I 10:06:55 Write Speed: MAX I 10:06:55 Lock Volume: Yes I 10:06:55 Test Mode: No I 10:06:55 OPC: No I 10:06:55 BURN-Proof: Enabled I 10:06:55 Write Speed Successfully Set! - Effective: 1,412 KB/s (8x) E 10:06:55 Failed to set Write Parameters! E 10:06:55 Reason: Invalid Field in Parameter List E 10:07:02 Operation Failed! - Duration: 00:00:07 I 10:07:02 Average Write Rate: N/A - Maximum Write Rate: N/A I 10:07:28 Operation Started! I 10:07:28 Source File: F:\VisualPlusTemp\VisualPlus v3.7.4.0.iso I 10:07:28 Source File Sectors: 21,008 (MODE1/2048) I 10:07:28 Source File Size: 43,024,384 bytes I 10:07:28 Source File Volume Identifier: VisualPlus 3.7.4.0 I 10:07:28 Source File Volume Set Identifier: 091123_1307 I 10:07:28 Source File Application Identifier: Roxio Burn Engine 2.0.2 I 10:07:28 Source File Implementation Identifier: RoxioBurnEngine 2.0.2 I 10:07:28 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 10:07:28 Destination Device: [1:0:0] QSI DVD/CDRW SBW-081 NA02 (D:) (ATA) I 10:07:28 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) (Speeds: 8x) I 10:07:28 Destination Media Sectors: 359,847 I 10:07:28 Write Mode: CD I 10:07:28 Write Type: SAO I 10:07:28 Write Speed: MAX I 10:07:28 Lock Volume: Yes I 10:07:28 Test Mode: No I 10:07:28 OPC: No I 10:07:28 BURN-Proof: Enabled I 10:07:28 Write Speed Successfully Set! - Effective: 1,412 KB/s (8x) E 10:07:28 Failed to set Write Parameters! E 10:07:28 Reason: Invalid Field in Parameter List E 10:07:49 Operation Failed! - Duration: 00:00:20 I 10:07:49 Average Write Rate: N/A - Maximum Write Rate: N/A I 10:08:05 Operation Started! I 10:08:05 Source File: F:\VisualPlusTemp\VisualPlus v3.7.4.0.iso I 10:08:05 Source File Sectors: 21,008 (MODE1/2048) I 10:08:05 Source File Size: 43,024,384 bytes I 10:08:05 Source File Volume Identifier: VisualPlus 3.7.4.0 I 10:08:05 Source File Volume Set Identifier: 091123_1307 I 10:08:05 Source File Application Identifier: Roxio Burn Engine 2.0.2 I 10:08:05 Source File Implementation Identifier: RoxioBurnEngine 2.0.2 I 10:08:05 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 10:08:05 Destination Device: [1:0:0] QSI DVD/CDRW SBW-081 NA02 (D:) (ATA) I 10:08:05 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) (Speeds: 8x) I 10:08:05 Destination Media Sectors: 359,847 I 10:08:05 Write Mode: CD I 10:08:05 Write Type: SAO I 10:08:05 Write Speed: 16x I 10:08:05 Lock Volume: Yes I 10:08:05 Test Mode: No I 10:08:05 OPC: No I 10:08:05 BURN-Proof: Enabled W 10:08:05 Write Speed Miscompare! - Wanted: 2,822 KB/s (16x), Got: 1,412 KB/s (8x) E 10:08:05 Failed to set Write Parameters! E 10:08:05 Reason: Invalid Field in Parameter List E 10:08:08 Operation Failed! - Duration: 00:00:02 I 10:08:08 Average Write Rate: N/A - Maximum Write Rate: N/A I 10:13:10 Operation Started! I 10:13:10 Source File: F:\VisualPlusTemp\VisualPlus v3.7.4.0.iso I 10:13:10 Source File Sectors: 21,008 (MODE1/2048) I 10:13:10 Source File Size: 43,024,384 bytes I 10:13:10 Source File Volume Identifier: VisualPlus 3.7.4.0 I 10:13:10 Source File Volume Set Identifier: 091123_1307 I 10:13:10 Source File Application Identifier: Roxio Burn Engine 2.0.2 I 10:13:10 Source File Implementation Identifier: RoxioBurnEngine 2.0.2 I 10:13:10 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 10:13:10 Destination Device: [1:0:0] QSI DVD/CDRW SBW-081 NA02 (D:) (ATA) I 10:13:10 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) (Speeds: 8x) I 10:13:10 Destination Media Sectors: 359,847 I 10:13:10 Write Mode: CD I 10:13:10 Write Type: SAO I 10:13:10 Write Speed: 16x I 10:13:10 Lock Volume: Yes I 10:13:10 Test Mode: No I 10:13:10 OPC: No I 10:13:10 BURN-Proof: Enabled W 10:13:10 Write Speed Miscompare! - Wanted: 2,822 KB/s (16x), Got: 1,412 KB/s (8x) E 10:13:10 Failed to set Write Parameters! E 10:13:10 Reason: Invalid Field in Parameter List E 10:13:15 Operation Failed! - Duration: 00:00:05 I 10:13:15 Average Write Rate: N/A - Maximum Write Rate: N/A I 10:28:23 Operation Started! I 10:28:23 Source File: F:\VisualPlusTemp\VisualPlus v3.7.4.0.iso I 10:28:23 Source File Sectors: 21,008 (MODE1/2048) I 10:28:23 Source File Size: 43,024,384 bytes I 10:28:23 Source File Volume Identifier: VisualPlus 3.7.4.0 I 10:28:23 Source File Volume Set Identifier: 091123_1307 I 10:28:23 Source File Application Identifier: Roxio Burn Engine 2.0.2 I 10:28:23 Source File Implementation Identifier: RoxioBurnEngine 2.0.2 I 10:28:23 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 10:28:23 Destination Device: [1:0:0] QSI DVD/CDRW SBW-081 NA02 (D:) (ATA) I 10:28:23 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) (Speeds: 8x) I 10:28:23 Destination Media Sectors: 359,847 I 10:28:23 Write Mode: CD I 10:28:23 Write Type: SAO I 10:28:23 Write Speed: MAX I 10:28:23 Lock Volume: Yes I 10:28:23 Test Mode: No I 10:28:23 OPC: No I 10:28:23 BURN-Proof: Enabled I 10:28:23 Write Speed Successfully Set! - Effective: 1,412 KB/s (8x) E 10:28:23 Failed to set Write Parameters! E 10:28:23 Reason: Invalid Field in Parameter List E 10:28:33 Operation Failed! - Duration: 00:00:09 I 10:28:33 Average Write Rate: N/A - Maximum Write Rate: N/A Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 29, 2010 Share Posted March 29, 2010 Repeat what you tried above (with default settings) BUT press F8 *before* you hit the big 'Write' button. Then when it errors out, get rid of the error box and save the log to a file. Then upload the log file here on the forum please. Link to comment Share on other sites More sharing options...
Recommended Posts