Maxstax Posted April 11, 2010 Posted April 11, 2010 (edited) Hi everyone, this is my first post here so i'm kinda new to this.. I have always been able to burn images to dvd dl using imgburn with absolutely no problem whatsoever, but recently I have reinstalled my windows xp and since then, when I try to burn an image to dvd-dl it gives me this error: " i/o error scsistatus 0x02". I've tried using different burning speeds, I've updated my drive (which is a LG GH22NS30) to the latest firmware and I am using verbatim DL as media. I'm totally clueless to what might cause this problem and it is really (REALLY!) bugging me out. Any help in regard to my problem would be greatly appreciated!, the log can be found below... thanx in advance. I 00:55:11 ImgBurn Version 2.5.1.0 started! I 00:55:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 00:55:11 Total Physical Memory: 3.145.072 KB - Available: 2.464.780 KB I 00:55:11 Initialising SPTI... I 00:55:11 Searching for SCSI / ATAPI devices... I 00:55:11 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NS30 2.00 (D:) (ATA) I 00:55:11 -> Drive 2 - Info: _NEC DVD_RW ND-3540A 1.01 (E:) (ATA) I 00:55:11 Found 1 DVD±RW and 1 DVD±RW/RAM! I 00:55:13 Operation Started! I 00:55:13 Source File: C:\Media\XBOX\SPLINTER\HHH\SCConviction.dvd I 00:55:13 Source File Sectors: 3.827.488 (MODE1/2048) I 00:55:13 Source File Size: 7.838.695.424 bytes I 00:55:13 Source File Volume Identifier: DVD_ROM I 00:55:13 Source File Volume Set Identifier: 356fc000MS UDFBridge I 00:55:13 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 00:55:13 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 00:55:13 Source File File System(s): ISO9660; UDF (1.50) I 00:55:13 Destination Device: [1:1:0] HL-DT-ST DVD-RAM GH22NS30 2.00 (D:) (ATA) I 00:55:13 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 00:55:13 Destination Media Sectors: 3.827.520 I 00:55:13 Write Mode: DVD I 00:55:13 Write Type: DAO I 00:55:13 Write Speed: 4x I 00:55:13 Link Size: Auto I 00:55:13 Lock Volume: Yes I 00:55:13 Test Mode: No I 00:55:13 OPC: No I 00:55:13 BURN-Proof: Enabled I 00:55:13 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 00:55:13 Book Type Setting: DVD-ROM I 00:55:13 Optimal L0 Data Zone Capacity: 1.913.760 I 00:55:13 Optimal L0 Data Zone Method: Copied From Original Disc I 00:55:13 Set L0 Data Zone Capacity Succeeded! I 00:55:14 Filling Buffer... (40 MB) I 00:55:14 Writing LeadIn... W 00:55:14 Failed to Write Sectors 0 - 31 - Reason: Invalid Address For Write W 00:55:14 Retrying (1 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (2 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (3 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (4 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (5 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (6 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (7 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (8 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (9 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (10 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (11 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (12 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (13 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (14 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (15 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (16 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (17 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (18 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (19 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write W 00:55:14 Retrying (20 of 20)... W 00:55:14 Retry Failed - Reason: Invalid Address For Write E 00:55:16 Failed to Write Sectors 0 - 31 - Reason: Invalid Address For Write E 00:55:16 Next Writable Address: 0 I 00:55:16 Synchronising Cache... W 00:55:19 User opted to skip the 'Close Track/Session/Disc' functions. E 00:55:19 Failed to Write Image! E 00:55:19 Operation Failed! - Duration: 00:00:05 I 00:55:19 Average Write Rate: N/A - Maximum Write Rate: N/A Rate: N/A Edited April 11, 2010 by Maxstax
Maxstax Posted April 12, 2010 Author Posted April 12, 2010 Use a new disc and post another log. Ok thanx a bunch. A new disk worked like a charm, for anyone with the same problem: I uninstalled the sptd drivers that came with daemon tools via the install program downloaded from their site -they seem to interfere with the drive, then I used a new disk. Problem solved.
Recommended Posts