chroma601 Posted April 12, 2010 Posted April 12, 2010 I am having the same problem as "Multiple Failures" below. It started with upgrading to 2.5.1.0 - it just stops burning, before halfway through.
chroma601 Posted April 13, 2010 Author Posted April 13, 2010 (edited) And where's the log of your burn? ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Saturday, 10 April 2010, 10:12:00 ; \\****************************************// ; ; I 08:34:47 ImgBurn Version 2.5.1.0 started! I 08:34:47 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 08:34:47 Total Physical Memory: 2,029,436 KB - Available: 837,060 KB W 08:34:47 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 08:34:47 Initialising SPTI... I 08:34:47 Searching for SCSI / ATAPI devices... I 08:34:47 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-L632M 0817 (E:) (ATA) I 08:34:47 -> Drive 2 - Info: ZCDCFAJ PUV8PUVW52 1.03 (G:) (SCSI) I 08:34:47 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 09:31:28 Operation Started! I 09:31:28 Source File: C:\X\E\YELLOW_SUBMARINE.iso I 09:31:28 Source File Sectors: 2,229,514 (MODE1/2048) I 09:31:28 Source File Size: 4,566,044,672 bytes I 09:31:28 Source File Volume Identifier: YELLOW_SUBMARINE I 09:31:28 Source File Volume Set Identifier: 4BC0750F000001A4 I 09:31:28 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 09:31:28 Source File Implementation Identifier: mkisofs I 09:31:28 Source File File System(s): ISO9660, UDF (1.02) I 09:31:28 Destination Device: [0:0:0] TSSTcorp CD/DVDW TS-L632M 0817 (E:) (ATA) I 09:31:28 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 2x, 4x, 6x, 8x) I 09:31:28 Destination Media Sectors: 2,297,888 I 09:31:28 Write Mode: DVD I 09:31:28 Write Type: DAO I 09:31:28 Write Speed: 4x I 09:31:28 Link Size: Auto I 09:31:28 Lock Volume: Yes I 09:31:28 Test Mode: No I 09:31:28 OPC: No I 09:31:28 BURN-Proof: Enabled I 09:31:30 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 09:31:31 Filling Buffer... (40 MB) I 09:31:44 Writing LeadIn... I 09:32:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 2229513) I 09:32:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2229513) W 10:07:49 Failed to Write Sectors 885248 - 885279 - Reason: Write Error W 10:07:49 Retrying (1 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (2 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (3 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (4 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (5 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (6 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (7 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (8 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (9 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (10 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (11 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (12 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (13 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (14 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (15 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (16 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (17 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (18 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (19 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:07:49 Retrying (20 of 20)... W 10:07:49 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 10:11:37 Retrying (21)... W 10:11:37 Retry Failed - Reason: Cannot Write Medium - Incompatible Format E 10:11:39 Failed to Write Sectors 885248 - 885279 - Reason: Write Error I 10:11:39 Synchronising Cache... W 10:11:47 User opted to skip the 'Close Track/Session/Disc' functions. E 10:11:47 Failed to Write Image! I 10:11:48 Exporting Graph Data... I 10:11:48 Graph Data File: C:\Users\Robert\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-L632M_0817_SATURDAY-APRIL-10-2010_9-31_AM_TYG02_4x.ibg I 10:11:48 Export Successfully Completed! E 10:11:48 Operation Failed! - Duration: 00:40:19 I 10:11:48 Average Write Rate: 744 KB/s (0.5x) - Maximum Write Rate: 5,585 KB/s (4.0x) I 10:12:00 Close Request Acknowledged I 10:12:00 Closing Down... I 10:12:00 Shutting down SPTI... I 10:12:00 ImgBurn closed! ; Edited April 13, 2010 by chroma601
mmalves Posted April 13, 2010 Posted April 13, 2010 Have you tried burning at 6x and 8x? What's the brand of the blanks you have?
chroma601 Posted April 13, 2010 Author Posted April 13, 2010 Have you tried burning at 6x and 8x? What's the brand of the blanks you have? Yes, I have tried other speeds. Discs are Taiyo Yuden TYG02, which have always worked well with Imgburn. As an experiment, I attempted a burn with Nero - and it worked fine. This new problem with Imgburn seems to have started with the recent upgrade.
mmalves Posted April 13, 2010 Posted April 13, 2010 The burn process depends entirely on the burner/firmware/media combination: the software just feeds the data in the correct order. Try a lens cleaning disc on that burner and it might help.
chroma601 Posted April 13, 2010 Author Posted April 13, 2010 The burn process depends entirely on the burner/firmware/media combination: the software just feeds the data in the correct order. Try a lens cleaning disc on that burner and it might help. Ever the experimenter, i downgraded to 2.4.4.0 - and it worked! ; //****************************************\\ ; ImgBurn Version 2.4.4.0 - Log ; Tuesday, 13 April 2010, 11:24:29 ; \\****************************************// ; ; I 11:04:33 ImgBurn Version 2.4.4.0 started! I 11:04:33 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 11:04:33 Total Physical Memory: 2,029,436 KB - Available: 967,328 KB I 11:04:33 Initialising SPTI... I 11:04:33 Searching for SCSI / ATAPI devices... I 11:04:36 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 11:05:42 Operation Started! I 11:05:42 Source File: C:\X\E\YELLOW_SUBMARINE.iso I 11:05:42 Source File Sectors: 2,229,514 (MODE1/2048) I 11:05:42 Source File Size: 4,566,044,672 bytes I 11:05:42 Source File Volume Identifier: YELLOW_SUBMARINE I 11:05:42 Source File Volume Set Identifier: 4BC0750F000001A4 I 11:05:42 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 11:05:42 Source File Implementation Identifier: mkisofs I 11:05:42 Source File File System(s): ISO9660, UDF (1.02) I 11:05:42 Destination Device: [0:0:0] TSSTcorp CD/DVDW TS-L632M 0817 (E:) (ATA) I 11:05:42 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 2x, 4x, 6x, 8x) I 11:05:42 Destination Media Sectors: 2,297,888 I 11:05:42 Write Mode: DVD I 11:05:42 Write Type: DAO I 11:05:42 Write Speed: 4x I 11:05:42 Link Size: Auto I 11:05:42 Lock Volume: Yes I 11:05:42 Test Mode: No I 11:05:42 OPC: No I 11:05:42 BURN-Proof: Enabled I 11:05:45 Filling Buffer... (40 MB) I 11:05:46 Writing LeadIn... I 11:06:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 2229513) I 11:06:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2229513) I 11:22:07 Synchronising Cache... I 11:22:36 Exporting Graph Data... I 11:22:36 Graph Data File: C:\Users\Robert\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-L632M_0817_TUESDAY-APRIL-13-2010_11-05_AM_TYG02_4x.ibg I 11:22:36 Export Successfully Completed! I 11:22:36 Operation Successfully Completed! - Duration: 00:16:50 I 11:22:36 Average Write Rate: 4,630 KB/s (3.3x) - Maximum Write Rate: 5,589 KB/s (4.0x) I 11:24:28 Close Request Acknowledged I 11:24:28 Closing Down... I 11:24:29 Shutting down SPTI... I 11:24:29 ImgBurn closed! ; Some notes - the drive stopped writing twice, towards the end of the burn, but restarted quickly. Buffers never budged from full. I also didn't get the SPTI detrimental warning.
LIGHTNING UK! Posted April 13, 2010 Posted April 13, 2010 Not that it makes the slightest bit of difference (because it's not something I have any control over) but I'll just mention that I did 150 burns on TYG02 discs a few days before 2.5.1.0 was released... not a single failure. Like for like, no single version will produce any more or less coasters than another version, even if you 'think' it is. The warning is for SPTD, not SPTI... they're totally different. The warnings were added in 2.5.0.0, that's why you're not seeing them in 2.4.4.0.
chroma601 Posted April 14, 2010 Author Posted April 14, 2010 Not that it makes the slightest bit of difference (because it's not something I have any control over) but I'll just mention that I did 150 burns on TYG02 discs a few days before 2.5.1.0 was released... not a single failure. Like for like, no single version will produce any more or less coasters than another version, even if you 'think' it is. The warning is for SPTD, not SPTI... they're totally different. The warnings were added in 2.5.0.0, that's why you're not seeing them in 2.4.4.0. Thanks for the info. Please don't get the slightest idea that I have an issue with ImgBurn, I love this program. At least I have it working now, even if it is an earlier version. I can't begin to fathom it. I will pick up a cleaning disc anyway. And yes, I have a bit of a memory leak now and then. And I don't know the difference between SPTD and SPTI, I admit it. I just like everything to work! Perhaps I have an off bunch of TY discs?
Recommended Posts