imgburn get stuck before even starting the burning process

[rulez]

hey everyone

 

im using win 7

and now i try to burn a double layer disc for my xbox

i did it many times before using this program

but now imgburn get stuck right after i click on the burn button

it doesnt even start the burning process

since i did it with no disc inside and it didnt open the tray

or asked to put a blank disc in

 

the message on the main window on the bottom says :

"setting lo data zone capacity"

 

and the log says :

 

I 18:59:18 ImgBurn Version 2.5.1.0 started!

I 18:59:18 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 18:59:18 Total Physical Memory: 2,065,732 KB - Available: 1,208,564 KB

W 18:59:18 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 18:59:18 Initialising SPTI...

I 18:59:18 Searching for SCSI / ATAPI devices...

I 18:59:19 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS40 NL02 (D:) (ATA)

I 18:59:19 -> Drive 2 - Info: AVW 0XQJGTYRS 1.03 (H:) (SCSI)

I 18:59:19 -> Drive 3 - Info: HL-DT-ST DVDRAM GSA-E50L NE01 (I:) (USB)

I 18:59:19 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!

I 18:59:27 Searching for SCSI / ATAPI devices...

I 18:59:27 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS40 NL02 (D:) (ATA)

I 18:59:27 -> Drive 2 - Info: AVW 0XQJGTYRS 1.03 (H:) (SCSI)

I 18:59:27 -> Drive 3 - Info: HL-DT-ST DVDRAM GSA-E50L NE01 (I:) (USB)

I 18:59:27 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!

I 19:02:10 Operation Started!

I 19:02:10 Source File: C:\Users\tal\Downloads\Just.Cause.2.X360-Allstars\all-jc2\all-jc2.dvd

I 19:02:10 Source File Sectors: 3,827,488 (MODE1/2048)

I 19:02:10 Source File Size: 7,838,695,424 bytes

I 19:02:10 Source File Volume Identifier: DVD_ROM

I 19:02:10 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 19:02:10 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:02:10 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:02:10 Source File File System(s): ISO9660, UDF (1.50)

I 19:02:10 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-E50L NE01 (I:) (USB)

I 19:02:10 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x)

I 19:02:10 Destination Media Sectors: 4,173,824

I 19:02:10 Write Mode: DVD

I 19:02:10 Write Type: DAO

I 19:02:10 Write Speed: MAX

I 19:02:10 Link Size: Auto

I 19:02:10 Lock Volume: Yes

I 19:02:10 Test Mode: No

I 19:02:10 OPC: No

I 19:02:10 BURN-Proof: Enabled

I 19:02:10 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x)

I 19:02:10 Book Type Setting: DVD-ROM

I 19:02:10 Optimal L0 Data Zone Capacity: 1,913,760

I 19:02:10 Optimal L0 Data Zone Method: Copied From Original Disc

 

 

and thats it

after couple of minutes the computer gets stuck

and i cant shutdown the program

even if i try to end it using the task manager

the only solution is a reset

 

thanks all!

[LIGHTNING UK!]

Try the NE02 firmware update.

 

http://www.firmwarehq.com/LG/GSA-E50L/files.html

 

If your USB drive is playing up, can't you use the internal LG instead?