Renegade Posted April 27, 2010 Posted April 27, 2010 (edited) Hi, A have an ASUS DVD-RW unit,model 2014L1T Firmware v1.00.If i try to burn DVD-DL media recive this error. ImgBurn.log ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; marţi, 27 aprilie 2010, 19:20:46 ; \\****************************************// ; ; I 19:20:43 ImgBurn Version 2.5.1.0 started! I 19:20:43 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 19:20:43 Total Physical Memory: 3.668.464 KB - Available: 2.471.368 KB W 19:20:43 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 19:20:43 Initialising SPTI... I 19:20:43 Searching for SCSI / ATAPI devices... I 19:20:43 -> Drive 1 - Info: ASUS CRW-5224A 1.36 (F:) (ATA) I 19:20:43 -> Drive 2 - Info: ASUS DRW-2014L1T 1.00 (G:) (SATA) I 19:20:43 -> Drive 3 - Info: ITSP GH67GH2F8 1.03 (H:) (SCSI) I 19:20:43 Found 1 CD-RW, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 19:20:46 Close Request Acknowledged I 19:20:46 Closing Down... I 19:20:46 Shutting down SPTI... I 19:20:46 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; marţi, 27 aprilie 2010, 18:47:34 ; \\****************************************// ; ; I 18:47:12 ImgBurn Version 2.5.1.0 started! I 18:47:12 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 18:47:12 Total Physical Memory: 3.668.464 KB - Available: 2.852.296 KB W 18:47:12 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 18:47:12 Initialising SPTI... I 18:47:12 Searching for SCSI / ATAPI devices... I 18:47:12 -> Drive 1 - Info: ASUS CRW-5224A 1.36 (F:) (ATA) I 18:47:12 -> Drive 2 - Info: ASUS DRW-2014L1T 1.00 (G:) (SATA) I 18:47:12 -> Drive 3 - Info: ITSP GH67GH2F8 1.03 (H:) (SCSI) I 18:47:12 Found 1 CD-RW, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 18:47:34 Close Request Acknowledged I 18:47:34 Closing Down... I 18:47:34 Shutting down SPTI... I 18:47:34 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; marţi, 27 aprilie 2010, 10:50:42 ; \\****************************************// ; ; I 10:50:36 ImgBurn Version 2.5.1.0 started! I 10:50:36 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 10:50:36 Total Physical Memory: 3.668.464 KB - Available: 2.825.648 KB W 10:50:36 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 10:50:36 Initialising SPTI... I 10:50:36 Searching for SCSI / ATAPI devices... I 10:50:36 -> Drive 1 - Info: ASUS CRW-5224A 1.36 (F:) (ATA) I 10:50:36 -> Drive 2 - Info: ASUS DRW-2014L1T 1.00 (G:) (SATA) I 10:50:36 -> Drive 3 - Info: ITSP GH67GH2F8 1.03 (H:) (SCSI) I 10:50:36 Found 1 CD-RW, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 10:50:42 Close Request Acknowledged I 10:50:42 Closing Down... I 10:50:42 Shutting down SPTI... I 10:50:42 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; marţi, 27 aprilie 2010, 10:50:18 ; \\****************************************// ; ; I 10:16:35 ImgBurn Version 2.5.1.0 started! I 10:16:35 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 10:16:35 Total Physical Memory: 3.668.464 KB - Available: 2.883.004 KB W 10:16:35 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 10:16:35 Initialising SPTI... I 10:16:35 Searching for SCSI / ATAPI devices... I 10:16:35 -> Drive 1 - Info: ASUS CRW-5224A 1.36 (F:) (ATA) I 10:16:35 -> Drive 2 - Info: ASUS DRW-2014L1T 1.00 (G:) (SATA) I 10:16:35 -> Drive 3 - Info: ITSP GH67GH2F8 1.03 (H:) (SCSI) I 10:16:35 Found 1 CD-RW, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 10:17:25 Operation Started! I 10:17:25 Source File: D:\Torrent\Crysis\rzr-crys.iso I 10:17:25 Source File Sectors: 3.163.747 (MODE1/2048) I 10:17:25 Source File Size: 6.479.353.856 bytes I 10:17:25 Source File Volume Identifier: Crysis I 10:17:25 Source File Implementation Identifier: ULTRAISO v8.6.3.2056 I 10:17:25 Source File File System(s): ISO9660; Joliet I 10:17:25 Destination Device: [4:0:0] ASUS DRW-2014L1T 1.00 (G:) (SATA) I 10:17:25 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x) I 10:17:25 Destination Media Sectors: 4.173.824 I 10:17:25 Write Mode: DVD I 10:17:25 Write Type: DAO I 10:17:25 Write Speed: 2,4x I 10:17:25 Link Size: Auto I 10:17:25 Lock Volume: Yes I 10:17:25 Test Mode: No I 10:17:25 OPC: No I 10:17:25 BURN-Proof: Enabled W 10:17:25 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) I 10:17:25 Optimal L0 Data Zone Capacity: 1.581.888 I 10:17:25 Optimal L0 Data Zone Method: ECC Block Boundary I 10:18:07 Set L0 Data Zone Capacity Succeeded! I 10:18:07 Filling Buffer... (40 MB) I 10:18:08 Writing LeadIn... I 10:18:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3163746) I 10:18:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3163746) I 10:18:12 Writing Layer 0... (LBA: 0 - 1581887) I 10:28:46 Writing Layer 1... (LBA: 1581888 - 3163746) I 10:39:05 Synchronising Cache... I 10:39:34 Closing Track... I 10:39:39 Finalising Disc... W 10:40:55 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 10:40:55 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 10:40:55 Retrying (1 of 3)... W 10:42:12 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 10:42:12 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 10:42:12 Retrying (2 of 3)... W 10:43:39 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 10:43:39 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 10:43:39 Retrying (3 of 3)... W 10:44:48 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 10:44:48 Retry Failed - Reason: Session Fixation Error Writing Lead Out E 10:48:56 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out I 10:48:56 Finalising Disc (Last Attempt!)... I 10:49:31 Abort Request Acknowledged E 10:50:15 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out E 10:50:15 Failed to Write Image! I 10:50:15 Exporting Graph Data... I 10:50:15 Graph Data File: C:\Users\Renegade\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-2014L1T_1.00_27-APRILIE-2010_10-17_RICOHJPN-D01-67_2,4x.ibg I 10:50:15 Export Successfully Completed! E 10:50:15 Operation Aborted! - Duration: 00:32:49 I 10:50:15 Average Write Rate: 5.049 KB/s (3.6x) - Maximum Write Rate: 5.572 KB/s (4.0x) I 10:50:18 Close Request Acknowledged I 10:50:18 Closing Down... I 10:50:18 Shutting down SPTI... I 10:50:18 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; marţi, 27 aprilie 2010, 10:16:30 ; \\****************************************// ; ; I 10:16:04 ImgBurn Version 2.5.1.0 started! I 10:16:04 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 10:16:04 Total Physical Memory: 3.668.464 KB - Available: 2.887.600 KB W 10:16:04 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 10:16:04 Initialising SPTI... I 10:16:04 Searching for SCSI / ATAPI devices... I 10:16:04 -> Drive 1 - Info: ASUS CRW-5224A 1.36 (F:) (ATA) I 10:16:04 -> Drive 2 - Info: ASUS DRW-2014L1T 1.00 (G:) (SATA) I 10:16:04 -> Drive 3 - Info: ITSP GH67GH2F8 1.03 (H:) (SCSI) I 10:16:04 Found 1 CD-RW, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 10:16:30 Close Request Acknowledged I 10:16:30 Closing Down... I 10:16:30 Shutting down SPTI... I 10:16:30 ImgBurn closed! I try with more media type: Verbatim,Memorex,HP Another program can create problem(program and vesion): ImgBurn 2.5.1.0 Nero 9.4.26.0b Daemon Tools 4.35.5.0068 SPTD 1.62 My system: Model Name : GA-P35-DQ6(rev. 1.0) -------------------------- M/B Rev : 1.0 BIOS Ver : F9 ------------------------------------------------------------------------------- VGA Brand : Leadtek Model : GTX260 CPU Brand : Intel Model : E8400 Speed : 3Ghz Operation System : Win 7 32-bit Memory Brand : Kingston Type : DDRII Memory Size : 2x2GB Speed : 1066Mhz Power Supply : Chieftec 500 W BurnPlot screenshot P.S.-i find Firmware v1.02 Edited April 27, 2010 by Renegade
LIGHTNING UK! Posted April 27, 2010 Posted April 27, 2010 So try again with the newer firmware. Try with the other supported speeds. Read this: http://forum.imgburn.com/index.php?showtopic=8000
Recommended Posts