Slipstreaming problems with boot

[Beef Wellington]

Following the guide here I've tried to slipsteam and create a bootable disc multiple times. However, when I try to boot from said disc I get error "CDBOOT: Couldn't find NTLDR" every single time.

 

I've gone trough the whole guide and followed everything to the letter. Does anyone know what I could be doing wrong?

[LIGHTNING UK!]

Post the log

[Beef Wellington]

Post the log

 

Here is a recent one with me trying to modify a Bart CD. I tried to extract the boot image, modify the files on the CD, then burn with the original boot image. Same issue.

 

I 11:42:56 Operation Started!

I 11:42:56 Building Image Tree...

I 11:42:57 Checking Directory Depth...

I 11:42:57 Calculating Totals...

I 11:42:57 Preparing Image...

W 11:42:57 ISO9660 File System: 156 folder/file names have been modified due to your current settings.

I 11:42:57 Checking Path Length...

I 11:42:57 Contents: 1,280 Files, 30 Folders

I 11:42:57 Content Type: Data

I 11:42:57 Data Type: MODE1/2048

I 11:42:57 File System(s): ISO9660 (Bootable)

I 11:42:57 Volume Label: BART

I 11:42:57 Size: 177,013,853 bytes

I 11:42:57 Sectors: 87,017

I 11:42:57 Image Size: 178,388,992 bytes

I 11:42:57 Image Sectors: 87,104

I 11:42:59 Operation Successfully Completed! - Duration: 00:00:02

I 11:42:59 Operation Started!

I 11:42:59 Source File: -==/\/[bUILD IMAGE]\/\==-

I 11:42:59 Source File Sectors: 87,104 (MODE1/2048)

I 11:42:59 Source File Size: 178,388,992 bytes

I 11:42:59 Source File Volume Identifier: BART

I 11:42:59 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER!

I 11:42:59 Source File Implementation Identifier: ImgBurn v2.5.0.0

I 11:42:59 Source File File System(s): ISO9660 (Bootable)

I 11:42:59 Destination Device: [1:1:0] HL-DT-ST DVD+-RW GSA-H21L 2.02 (X:) (ATA)

I 11:42:59 Destination Media Type: CD-RW (Disc ID: 97m34s23f, Mitsubishi Chemical Corp.) (Speeds: 10x)

I 11:42:59 Destination Media Sectors: 336,073

I 11:42:59 Write Mode: CD

I 11:42:59 Write Type: SAO

I 11:42:59 Write Speed: 1x

I 11:42:59 Lock Volume: Yes

I 11:42:59 Test Mode: No

I 11:42:59 OPC: No

I 11:42:59 BURN-Proof: Enabled

W 11:42:59 Write Speed Miscompare! - Wanted: 176 KB/s (1x), Got: 706 KB/s (4x)

I 11:42:59 Filling Buffer... (20 MB)

I 11:43:01 Writing LeadIn...

I 11:43:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 87103)

I 11:43:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 87103)

I 11:48:34 Synchronising Cache...

I 11:49:00 Exporting Graph Data...

I 11:49:00 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GSA-H21L_2.02_TUESDAY-JUNE-01-2010_11-42_AM_97m34s23f_1x.ibg

I 11:49:00 Export Successfully Completed!

I 11:49:00 Operation Successfully Completed! - Duration: 00:06:00

I 11:49:00 Average Write Rate: 606 KB/s (4.0x) - Maximum Write Rate: 640 KB/s (4.3x)

[LIGHTNING UK!]

Do you actually have an i386 folder on that discs with ntldr in it?

 

Does ImgBurn prompt you to correct any settings?

 

I can't comment on 'Bart' stuff but the guide works fine with a real XP file set from a real XP install disc.

[ianymaty]

You did not verify the burn, in conequence there are no guarantee it is 100% accurate.

 

W 11:42:59 Write Speed Miscompare! - Wanted: 176 KB/s (1x), Got: 706 KB/s (4x)

 

I 11:42:59 Destination Media Type: CD-RW (Disc ID: 97m34s23f, Mitsubishi Chemical Corp.) (Speeds: 10x)

 

You wanted 1x ? Why? You got 4x, don't know how, since only available speed is 10x

 

I don't know, but you not should get an already Bootable ISO out of PE Builder and than burn it with ImgBurn in Write mode?