shieber Posted June 10, 2010 Posted June 10, 2010 (edited) On some ocassions, when I make an image from an audio CD and then burn the image to a good quality disk, the burn seems to go okay but when the very starts, it goes through an analysis of each tracks and will freeze on one of the tracks. For a given image it's always the same track. It just locks up there and won't proceed. I can copy and burn the cd jsut fine with NERO but Imgburn freezes at that analsis point in the Verify proceeedure. Oddly the source and target disks seem to work okay, the targets just can't be verified. I can set the read speed to dfiff values but the result is the same. In this image, it's always track 5 where the verify/analysis freezes up. I can make a new image form the origninal disk but he result is the same. After buring, the verify starts with analyzing tracks and freezes at track 5. This is as much as the log says: I 15:11:33 Operation Started! I 15:11:33 Source Device: [1:0:0] TSSTcorp CDW/DVD TS-H492C IB01 (E:) (ATA) I 15:11:33 Source Media Type: CD-R (Disc ID: 97m15s17f) I 15:11:33 Image File: D:\Image.cue I 15:11:33 Image File Sectors: 183,457 (AUDIO/2352) I 15:11:33 Image File Size: 431,490,864 bytes I 15:11:33 Image File File System(s): None I 15:11:33 Read Speed (Data/Audio): 4x / 4x Edited June 10, 2010 by shieber
LIGHTNING UK! Posted June 10, 2010 Posted June 10, 2010 This is a known issue and has been fixed for the next release.
shieber Posted June 10, 2010 Author Posted June 10, 2010 Terrrific. Thanks. I thought I might be missetting one of the parameters or maybe a track name was too long or something like that. regards, sh This is a known issue and has been fixed for the next release.
Recommended Posts