Garv Posted July 27, 2010 Posted July 27, 2010 I 16:59:35 ImgBurn Version 2.5.1.0 started! I 16:59:35 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600) I 16:59:35 Total Physical Memory: 2,096,440 KB - Available: 1,027,260 KB I 16:59:35 Initialising SPTI... I 16:59:35 Searching for SCSI / ATAPI devices... I 16:59:35 -> Drive 1 - Info: HL-DT-ST BD-RE WH08LS20 2.00 (E:) (ATA) I 16:59:35 -> Drive 2 - Info: LITE-ON DVD SHD-16S1S ES03 (F:) (ATA) I 16:59:35 Found 1 DVD-ROM and 1 BD-RE! I 17:11:54 Operation Started! I 17:11:54 Building Image Tree... I 17:11:57 Calculating Totals... I 17:11:57 Preparing Image... I 17:11:57 Contents: 9 Files, 15 Folders I 17:11:57 Content Type: BD Video I 17:11:57 Data Type: MODE1/2048 I 17:11:57 File System(s): UDF (2.50) I 17:11:57 Volume Label: THE_YOUNG_VICTORIA I 17:11:57 Size: 23,807,298,508 bytes I 17:11:57 Sectors: 11,624,664 I 17:11:57 Image Size: 23,808,311,296 bytes I 17:11:57 Image Sectors: 11,625,152 E 17:12:10 Operation Aborted! - Duration: 00:00:15 Looks fine to this point, right? At this point,the next step would be to say ok , but for purposes of trying to illustrate what is happening , I aborted. What will happen next is a total freeze of the entire PC.It stops responding and totally freezes up Windows 7 such that NOTHING will respond . You can't even Ctrl-Alt-Delete it. A hard reset of the PC is required to get back to normalcy. What is up?
mmalves Posted July 27, 2010 Posted July 27, 2010 That's usually caused by bad/old drivers or misconfigured SATA controller. Have you looked for the most recent chipset/storage drivers for your system? How is your SATA controller configured in the BIOS?
Garv Posted July 28, 2010 Author Posted July 28, 2010 Yesterday and for 56 other previous perfect burns it was perfect. How could it change overnight witn no hardware or software changes?
LIGHTNING UK! Posted July 28, 2010 Posted July 28, 2010 Get it to freeze again and make a note of exactly what's written in the status bar when it gets stuck.
Garv Posted July 28, 2010 Author Posted July 28, 2010 I figured it out - BAD media. I tried a spare BD-RE i have lying around and it workrd perferctly. I had 4 bad discs in a row from the same cake! Go figure...
Recommended Posts