finalise disc failed

[atakli]

Hi there i was going to say im having problem when i burn xbox 360 games with my img burn program its saying finalise disc failed.. can you help please.

 

finalise disc failed

 

Device: [2:1:0] Optiarc DVD RW AD - 7240S 1.03 (D:) (ATA)

 

Reason: Power Calibration Area Error.

this is the error it comes up.

 

I 13:50:03 ImgBurn Version 2.5.2.0 started!

I 13:50:03 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 13:50:03 Total Physical Memory: 3,144,248 KB - Available: 2,480,044 KB

W 13:50:03 Drive E:\ (FAT32) does not support single files > 4 GB in size.

W 13:50:03 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 13:50:03 Initialising Patin-Couffin...

I 13:50:03 Patin-Couffin - VSO Software - Version 1.36.0.0 - Internal Revision 36

I 13:50:03 Searching for SCSI / ATAPI devices...

I 13:50:03 -> Drive 1 - Info: Optiarc DVD RW AD-7240S 1.04 (D:) (ATA)

I 13:50:03 -> Drive 2 - Info: KFK QRGDQZ8X 1.04 (J:) (SCSI)

I 13:50:03 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 13:50:14 Operation Started!

I 13:50:14 Source File: C:\Users\Atakli\Downloads\dgr-pes11.dvd

I 13:50:14 Source File Sectors: 3,697,696 (MODE1/2048)

I 13:50:14 Source File Size: 7,572,881,408 bytes

I 13:50:14 Source File Volume Identifier: DVD_ROM

I 13:50:14 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 13:50:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 13:50:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 13:50:14 Source File File System(s): ISO9660, UDF (1.50)

I 13:50:14 Destination Device: [2:1:0] Optiarc DVD RW AD-7240S 1.04 (D:) (ATA)

I 13:50:14 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

I 13:50:14 Destination Media Sectors: 4,173,824

I 13:50:14 Write Mode: DVD

I 13:50:14 Write Type: DAO

I 13:50:14 Write Speed: 8x

I 13:50:14 Link Size: Auto

I 13:50:14 Lock Volume: Yes

I 13:50:14 Test Mode: No

I 13:50:14 OPC: No

I 13:50:14 BURN-Proof: Enabled

I 13:50:15 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)

I 13:50:15 Book Type Setting: DVD-ROM

I 13:50:15 User Specified L0 Data Zone Capacity: 1,913,760

I 13:50:20 Set L0 Data Zone Capacity Succeeded!

I 13:50:21 Filling Buffer... (40 MB)

I 13:50:22 Writing LeadIn...

I 13:50:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695)

I 13:50:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695)

I 13:50:25 Writing Layer 0... (LBA: 0 - 1913759)

I 13:58:45 Writing Layer 1... (LBA: 1913760 - 3697695)

I 14:06:22 Synchronising Cache...

I 14:06:23 Closing Track...

I 14:06:38 Finalising Disc...

W 14:07:11 Potential 'WaitImmediateIO' Deferred Error - (63%, 0/3) - Power On, Reset, or Bus Device Reset Occurred

W 14:07:11 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred

W 14:07:11 Retrying (1 of 3)...

W 14:07:11 Retry Failed - Reason: Logical Unit is in process of becoming ready

W 14:07:11 Retrying (2 of 3)...

W 14:07:11 Retry Failed - Reason: Logical Unit is in process of becoming ready

W 14:07:11 Retrying (3 of 3)...

W 14:07:11 Retry Failed - Reason: Logical Unit is in process of becoming ready - 0%

Edited October 9, 2010 by atakli

[LIGHTNING UK!]

Why are you using Patin Couffin for the I/O Interface?

 

Switch back to SPTI.

 

Then give this a read:

 

http://forum.imgburn.com/index.php?showtopic=8000