wonderpig Posted October 16, 2010 Share Posted October 16, 2010 Got a new BD-R drive. The Lg BH10LS30 and have installed it OK. The thing is when I put some traxdata 25GB disks in while on image burn it just says 'Getting book type' in the bottom left and nothing else will happen. Please help...I havent got a clue what to do and have looked everywhere for answers with no luck Thanks Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2010 Share Posted October 16, 2010 Load the program without a disc in the drive. Copy + paste everything from the log window. Link to comment Share on other sites More sharing options...
wonderpig Posted October 16, 2010 Author Share Posted October 16, 2010 I 16:51:21 ImgBurn Version 2.5.2.0 started! I 16:51:21 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 16:51:21 Total Physical Memory: 3,143,848 KB - Available: 2,170,172 KB W 16:51:21 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:51:21 Initialising SPTI... I 16:51:21 Searching for SCSI / ATAPI devices... I 16:51:21 -> Drive 1 - Info: DVDRW DRW-6S160P PSG7 (F:) (ATA) I 16:51:22 -> Drive 2 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (E:) (SATA) I 16:51:22 Found 1 DVD±RW and 1 BD-RE! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2010 Share Posted October 16, 2010 Do you have an intel chipset motherboard? If so, install these: http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=10884 http://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=15251 (3rd one down) Link to comment Share on other sites More sharing options...
wonderpig Posted October 16, 2010 Author Share Posted October 16, 2010 I do have an intel chipset I installed the first one without any problems The second one had an error message...your computer does not meet the minimum requirements for the software Am I screwed? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2010 Share Posted October 16, 2010 Is the drive definitely plugged into a port on the motherboard that's controlled by the Intel chip? Does it work ok if you put a blank DVD in the drive instead of a BD? Link to comment Share on other sites More sharing options...
wonderpig Posted October 16, 2010 Author Share Posted October 16, 2010 yeh its in the chipset and it does read blank DVDs Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2010 Share Posted October 16, 2010 Do you just have the one type of BD-R? How about a BD-RE disc? Link to comment Share on other sites More sharing options...
wonderpig Posted October 16, 2010 Author Share Posted October 16, 2010 (edited) I only have BD-R and only traxdata. Should i get some BD-RE or some other BD-R Edited October 16, 2010 by wonderpig Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2010 Share Posted October 16, 2010 It wouldn't hurt to try Just remember that it's the dye the discs use that's important, not the brand. So buying a different brand doesn't mean you're actually getting different discs Get some Verbatim ones and you should be ok though - they only use their own dye (MCC/MKM) and I don't think anyone else uses it. Link to comment Share on other sites More sharing options...
wonderpig Posted October 16, 2010 Author Share Posted October 16, 2010 Ill try and get back to you Thanks for your help Link to comment Share on other sites More sharing options...
Recommended Posts