robtopdj15 Posted October 17, 2010 Posted October 17, 2010 I 17:38:54 ImgBurn Version 2.5.2.0 started! I 17:38:54 Microsoft Windows Vista Ultimate Edition (6.0, Build 6002 : Service Pack 2) I 17:38:54 Total Physical Memory: 514,776 KB - Available: 136,840 KB W 17:38:54 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 17:38:54 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 17:38:54 Initialising SPTI... I 17:38:54 Searching for SCSI / ATAPI devices... I 17:38:55 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.06 (F:) (ATA) I 17:38:55 Found 1 DVD±RW/RAM!
LIGHTNING UK! Posted October 17, 2010 Posted October 17, 2010 Pick a mode (just so you're not on the Ez-Mode Picker screen and put the dodgy disc in the drive. Tell me what it says in the status bar down the bottom of the main window.
robtopdj15 Posted October 17, 2010 Author Posted October 17, 2010 Pick a mode (just so you're not on the Ez-Mode Picker screen and put the dodgy disc in the drive. Tell me what it says in the status bar down the bottom of the main window. device not ready media not present
LIGHTNING UK! Posted October 17, 2010 Posted October 17, 2010 and if you eject + reinsert the disc whilst looking at the status bar, does it look like it's trying to initialise the disc? Can it still see blank discs ok (just not the burnt one) ? If it can, go into Write mode and copy + paste all the disc info from the box on the right.
robtopdj15 Posted October 17, 2010 Author Posted October 17, 2010 and if you eject + reinsert the disc whilst looking at the status bar, does it look like it's trying to initialise the disc? Can it still see blank discs ok (just not the burnt one) ? If it can, go into Write mode and copy + paste all the disc info from the box on the right. no it cant read any disc blank or burnt
Recommended Posts