JAkk43055 Posted October 18, 2010 Posted October 18, 2010 I 17:05:13 ImgBurn Version 2.5.0.0 started! I 17:05:13 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 17:05:13 Total Physical Memory: 3,143,992 KB - Available: 1,608,692 KB W 17:05:13 SPTD can have a detrimental effect on drive performance. I 17:05:13 Initialising SPTI... I 17:05:13 Searching for SCSI / ATAPI devices... I 17:05:13 Found 1 DVD±RW/RAM and 2 BD-ROM/HD DVD-ROMs! I 17:05:35 Operation Started! I 17:05:35 Source File: C:\Users\Omega\Desktop\Jdownloads\Extracted\dw_gundam2\dw_gundam2.dvd I 17:05:35 Source File Sectors: 3,827,488 (MODE1/2048) I 17:05:35 Source File Size: 7,838,695,424 bytes I 17:05:35 Source File Volume Identifier: DVD_ROM I 17:05:35 Source File Volume Set Identifier: 356fc000MS UDFBridge I 17:05:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:05:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:05:35 Source File File System(s): ISO9660, UDF (1.50) I 17:05:35 Destination Device: [1:1:0] HL-DT-ST DVDRAM GH22LS50 TL01 (D:) (ATA) I 17:05:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 17:05:35 Destination Media Sectors: 4,173,824 I 17:05:35 Write Mode: DVD I 17:05:35 Write Type: DAO I 17:05:35 Write Speed: 2.4x I 17:05:35 Link Size: Auto I 17:05:35 Lock Volume: Yes I 17:05:35 Test Mode: No I 17:05:35 OPC: No I 17:05:35 BURN-Proof: Enabled I 17:05:36 Book Type Setting: DVD-ROM I 17:05:36 User Specified L0 Data Zone Capacity: 1,913,760 I 17:06:15 Set L0 Data Zone Capacity Succeeded! I 17:06:16 Filling Buffer... (40 MB) I 17:06:17 Writing LeadIn... I 17:06:19 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 17:06:19 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 17:06:19 Writing Layer 0... (LBA: 0 - 1913759) I 17:26:10 Writing Layer 1... (LBA: 1913760 - 3827487) W 17:45:10 Waiting for buffers to recover... (LBA: 3729312) W 17:45:48 Waiting for hard disk activity to reach threshold level... I 18:09:38 Writing Sectors... I've searched and seen people berated for posting about this problem, but it's given me a coaster already and I'd rather not get another. Last time this happened, the disk was at 73%, this time it's at 97%. Those are with two different images being burnt. I'm using Verbatim DVD+R DL 2.4x, burning at 2.4x. I'm running Windows 7, and my hard drive is 0% fragmented with over 100GB free. I'm using about half of my 4GB of RAM, and around 20% of my 2.8GHz CPU. I have no idea what's causing this, and if the answer is an obvious one that my searching hasn't turned up, feel free to be mean, but please link me to the solution. Thank ya kindly in advance.
LIGHTNING UK! Posted October 18, 2010 Posted October 18, 2010 Something else must be using the hdd at the same time. It could be indexing or some other background process like that. It could be you downloading stuff, virus scanning... basically just *anything* that reads from/writes to the hdd. Even if the buffer issue does crop up, it shouldn't result in a coaster. The program and drive will resume just fine as soon as the system hdd usage goes back to 'normal'. btw, update the firmware on your drive. http://www.firmwarehq.com/LG/GH22LS50/files.html Update ImgBurn too.
Recommended Posts