meep2000 Posted October 19, 2010 Share Posted October 19, 2010 (edited) Hi, I'm new here, so please be gentle, been having huge probs burning discs with my new computer, however, the same discs burn no problem on my old antiquated computer, here is the log for the problem. I 14:28:00 ImgBurn Version 2.4.1.0 started! I 14:28:00 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 14:28:00 Total Physical Memory: 2,096,300 KB - Available: 1,684,588 KB I 14:28:00 Initialising SPTI... I 14:28:00 Searching for SCSI / ATAPI devices... I 14:28:01 Found 2 DVD±RW/RAMs! I 14:28:22 Operation Started! I 14:28:22 Source File: \\Paul-7e084d7578\my documents\Films to convert 2\f11x360.dvd I 14:28:22 Source File Sectors: 3,827,488 (MODE1/2048) I 14:28:22 Source File Size: 7,838,695,424 bytes I 14:28:22 Source File Volume Identifier: DVD_ROM I 14:28:22 Source File Volume Set Identifier: ec67c000MS UDFBridge I 14:28:22 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:28:22 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:28:22 Source File File System(s): ISO9660, UDF (1.50) I 14:28:22 Destination Device: [0:1:0] TSSTcorp CD/DVDW SH-S182D SB02 (E:) (ATA) I 14:28:22 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 14:28:22 Destination Media Sectors: 4,173,824 I 14:28:22 Write Mode: DVD I 14:28:22 Write Type: DAO I 14:28:22 Write Speed: 2.4x I 14:28:22 Link Size: Auto I 14:28:22 Test Mode: No I 14:28:22 OPC: No I 14:28:22 BURN-Proof: Enabled I 14:28:22 Book Type Setting: DVD-ROM I 14:28:22 User Specified L0 Data Zone Capacity: 1,913,760 I 14:29:54 Filling Buffer... (40 MB) I 14:29:59 Writing LeadIn... I 14:30:42 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 14:30:42 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 14:30:42 Writing Layer 0... (LBA: 0 - 1913759) I 14:49:54 Writing Layer 1... (LBA: 1913760 - 3827487) I 15:09:14 Synchronising Cache... I 15:09:21 Closing Track... W 15:10:01 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 15:10:01 Close Track Failed! - Reason: Program Memory Area Update Failure W 15:10:01 Retrying (1 of 3)... I 15:10:02 Finalising Disc... W 15:11:59 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 15:11:59 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 15:11:59 Retrying (1 of 3)... W 15:14:34 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 15:14:34 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 15:14:34 Retrying (2 of 3)... W 15:16:05 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 15:16:05 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 15:16:05 Retrying (3 of 3)... W 15:16:48 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 15:16:48 Retry Failed - Reason: Session Fixation Error Writing Lead In E 15:17:29 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out I 15:17:29 Finalising Disc (Last Attempt!)... E 15:19:21 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out E 15:19:21 Failed to Write Image! I 15:19:21 Exporting Graph Data... I 15:19:21 Graph Data File: C:\Documents and Settings\Paul\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_SH-S182D_SB02_19-OCTOBER-2010_14-28_RICOHJPN-D01-67_2.4x.ibg I 15:19:21 Export Successfully Completed! E 15:19:21 Operation Failed! - Duration: 00:50:58 I 15:19:21 Average Write Rate: 3,312 KB/s (2.4x) - Maximum Write Rate: 3,439 KB/s (2.5x) Any help would be most appreciated, cos I'm building up a good pile of coasters sorry, forgot to mention too, got 2 burners in this tower, an LG one as well, same error occurs with this on e too, also, seems to take ages to set the LO data zone on both burners, dunno if this helps any. Edited October 19, 2010 by meep2000 Link to comment Share on other sites More sharing options...
ianymaty Posted October 19, 2010 Share Posted October 19, 2010 Try the latest firmware SB07 http://www.firmwarehq.com/Samsung/SH-S182D/files.html Update ImgBurn to current version. See my signature Read this http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 19, 2010 Share Posted October 19, 2010 Update ImgBurn Update the firmware on your drives. One of which can be done with SB07 from here - http://www.firmwarehq.com/Samsung/SH-S182D/files.html Read this: http://forum.imgburn.com/index.php?showtopic=8000 EDIT: snap Link to comment Share on other sites More sharing options...
meep2000 Posted October 21, 2010 Author Share Posted October 21, 2010 Update ImgBurn Update the firmware on your drives. One of which can be done with SB07 from here - http://www.firmwarehq.com/Samsung/SH-S182D/files.html Read this: http://forum.imgburn.com/index.php?showtopic=8000 EDIT: snap Thanks for the link, seems to have worked, updating the firmware, burnt even with the cheap AONE discs, could you point me in the right direction for an update to my other drive I 16:28:53 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-H42L SL01 (D:) (ATA) many thanks in advance, you've been invaluable Link to comment Share on other sites More sharing options...
ianymaty Posted October 21, 2010 Share Posted October 21, 2010 Apparently SL01 is the current firmware for your HL-DT-ST DVDRAM GSA-H42L, there is no other latest. Link to comment Share on other sites More sharing options...
Recommended Posts