Jump to content

Recommended Posts

Posted (edited)

What mean this ? :

 

W 10:55:17 Potential 'WaitImmediateIO' Deferred Error - (14%, 0/3) - Spindle Servo Failure

W 10:55:17 Finalise Disc Failed! - Reason: Spindle Servo Failure

 

USED VERBATIM

 

ALL (log)

10:35:01 ImgBurn Version 2.5.2.0 started!

I 10:35:01 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 10:35:01 Total Physical Memory: 2.095.544 KB - Available: 987.212 KB

W 10:35:01 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 10:35:01 Initialising SPTI...

I 10:35:01 Searching for SCSI / ATAPI devices...

I 10:35:01 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-L632D TO04 (E:) (ATA)

I 10:35:02 -> Drive 2 - Info: FMT 92VG1QZ8X 1.03 (G:) (SCSI)

I 10:35:02 -> Drive 3 - Info: HL-DT-ST DVDRAM GE20LU11 CL01 (F:) (USB)

I 10:35:02 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!

I 10:35:45 Operation Started!

I 10:35:45 Source File: D:\Downloads\Qubed.XBOX360-MARVEL\mvlx-qube.dvd

I 10:35:45 Source File Sectors: 3.827.488 (MODE1/2048)

I 10:35:45 Source File Size: 7.838.695.424 bytes

I 10:35:45 Source File Volume Identifier: DVD_ROM

I 10:35:45 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 10:35:45 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 10:35:45 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 10:35:45 Source File File System(s): ISO9660; UDF (1.50)

I 10:35:45 Destination Device: [0:0:0] HL-DT-ST DVDRAM GE20LU11 CL01 (F:) (USB)

I 10:35:45 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x; 8x)

I 10:35:45 Destination Media Sectors: 4.173.824

I 10:35:45 Write Mode: DVD

I 10:35:45 Write Type: DAO

I 10:35:45 Write Speed: 8x

I 10:35:45 Link Size: Auto

I 10:35:45 Lock Volume: Yes

I 10:35:45 Test Mode: No

I 10:35:45 OPC: No

I 10:35:45 BURN-Proof: Enabled

I 10:35:45 Write Speed Successfully Set! - Effective: 11.079 KB/s (8x)

I 10:35:45 Book Type Setting: DVD-ROM

I 10:35:45 Optimal L0 Data Zone Capacity: 1.913.760

I 10:35:45 Optimal L0 Data Zone Method: Copied From Original Disc

W 10:35:45 L0 Data Zone Capacity Miscompare!

W 10:35:45 Wanted: 1913760, Got: 2086912

I 10:35:47 Filling Buffer... (40 MB)

I 10:35:49 Writing LeadIn...

I 10:36:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 10:36:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 10:36:27 Writing Layer 0... (LBA: 0 - 1913759)

I 10:45:00 Writing Layer 1... (LBA: 1913760 - 3827487)

I 10:54:59 Synchronising Cache...

I 10:55:00 Closing Track...

I 10:55:05 Finalising Disc...

W 10:55:17 Potential 'WaitImmediateIO' Deferred Error - (14%, 0/3) - Spindle Servo Failure

W 10:55:17 Finalise Disc Failed! - Reason: Spindle Servo Failure

W 10:55:17 Retrying (1 of 3)...

I 10:55:18 Exporting Graph Data...

I 10:55:18 Graph Data File: C:\Users\Vytenis\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GE20LU11_CL01_2010-M-SPALIS-21-D-_10-35_MKM-003-00_8x.ibg

I 10:55:18 Export Successfully Completed!

I 10:55:18 Operation Successfully Completed! - Duration: 00:19:32

I 10:55:18 Average Write Rate: 6.883 KB/s (5.0x) - Maximum Write Rate: 11.133 KB/s (8.0x)

I 11:04:54 Close Request Acknowledged

I 11:04:54 Closing Down...

I 11:04:55 Shutting down SPTI...

I 11:04:55 ImgBurn closed!

Edited by GodfatherIMG
Posted

How many times has it failed?

 

It may have just been a one off.

 

I 10:35:45 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x; 8x)

 

Try the other supported write speeds.

Posted

This is first time.

When i burn on 2x i broken a lot of DVD's, when start on 8x all 5 dvd was good to this try.

 

Meybe is a program which show which speed is best to writte ?

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.