--RS Posted October 23, 2010 Posted October 23, 2010 On my XP computer that I had to rebuild completely, NOW ImgBurn cannot write anymore any DVDRW; for the moment I am trying DVD-RW that used to work before the rebuild! This is XP Media Center Edition 2002 Service Pack 3! It cannot even erase the DVD-RW! Even if the disk is already erased! The DVD-RW is listed as JVC/VictorT7! When trying to write an empty DVD-RW I get the following popup: I/O Error! Device: [0:0:0] TSSTCorp CDDVDW SH-S222A SB02 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write(10) - Sectors: 0 - 31 Sense Area: 70 00 02 00 00 00 00 0A 00 00 00 00 30 11 00 00 00 00 Interpretation: Cannot Format Medium - Unsupported Medium Write Speed The write speed is 1x !! This last example was done with version 2.4.4.0 of ImgBurn! The log file ImgBurn3.log corresponds to this write portion! Before the rebuild, all worked exceptionally well! I tried with multiple versions of ImgBurn! From 2.5.2.0 and back! Thanks, --RS ImgBurn.log ImgBurn2.log ImgBurn3.log
LIGHTNING UK! Posted October 24, 2010 Posted October 24, 2010 Hmm I've never seen the 'JVC/VictorT7' MID before. It must be quite rare and I doubt it's very well supported in the firmware. Can't you just use a new disc?
--RS Posted October 25, 2010 Author Posted October 25, 2010 But why should I try a new disc? These discs worked before the rebuild of the system! There was no firmware change? And the discs work perfectly on my portable Vista machine, with all versions of ImgBurn, including 2.5.1.0 !! That successful log is attached. On my XP computer that I had to rebuild completely, NOW ImgBurn cannot write anymore any DVDRW; for the moment I am trying DVD-RW that used to work before the rebuild! This is XP Media Center Edition 2002 Service Pack 3! It cannot even erase the DVD-RW! Even if the disk is already erased! The DVD-RW is listed as JVC/VictorT7! When trying to write an empty DVD-RW I get the following popup: I/O Error! Device: [0:0:0] TSSTCorp CDDVDW SH-S222A SB02 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write(10) - Sectors: 0 - 31 Sense Area: 70 00 02 00 00 00 00 0A 00 00 00 00 30 11 00 00 00 00 Interpretation: Cannot Format Medium - Unsupported Medium Write Speed The write speed is 1x !! This last example was done with version 2.4.4.0 of ImgBurn! The log file ImgBurn3.log corresponds to this write portion! Before the rebuild, all worked exceptionally well! I tried with multiple versions of ImgBurn! From 2.5.2.0 and back! Thanks, --RS dvdrw-NoW.log
LIGHTNING UK! Posted October 25, 2010 Posted October 25, 2010 That's a log where you are using a totally different drive = useless. Just try another disc and see if you have the same issue.
Recommended Posts