Constant 'Failed to Verify'

[BadDog]

Hello,

 

I am receiving constant 'failed to verify' errors using imgBurn using any image. Not sure if the problem is with imgBurn or a hardware problem. New LG GH22NS50. Errors are constant across media. Checked drive installed securely. Replaced sata cable. Errors persist. The log below is from a video image burn so the disk works after burn but nevertheless there are errors.

 

Any assistance very much appreciated.

 

Log:

I 20:10:57 ImgBurn Version 2.5.2.0 started!

I 20:10:57 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 20:10:57 Total Physical Memory: 3,406,892 KB - Available: 2,775,012 KB

W 20:10:57 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 20:10:57 Initialising SPTI...

I 20:10:57 Searching for SCSI / ATAPI devices...

I 20:10:57 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS50 TN02 (D:) (ATA)

I 20:10:57 -> Drive 2 - Info: QTCH QFWPABOL 1.03 (R:) (SCSI)

I 20:10:57 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 20:12:30 Operation Started!

I 20:12:30 Source File: Z:\Images\A Lamp in the Dark HQ Full 3hours\test.iso

I 20:12:30 Source File Sectors: 2,123,552 (MODE1/2048)

I 20:12:30 Source File Size: 4,349,034,496 bytes

I 20:12:30 Source File Volume Identifier: A Lamp in the Dark HQ Full 3hours

I 20:12:30 Source File Volume Set Identifier: 3D599AC100206701

I 20:12:30 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!

I 20:12:30 Source File Implementation Identifier: ImgBurn

I 20:12:30 Source File File System(s): ISO9660, UDF (1.02)

I 20:12:30 Destination Device: [5:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (D:) (ATA)

I 20:12:30 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 4x, 8x, 12x, 16x)

I 20:12:30 Destination Media Sectors: 2,295,104

I 20:12:30 Write Mode: DVD

I 20:12:30 Write Type: DAO

I 20:12:30 Write Speed: MAX

I 20:12:30 DVD+R Reserve Track: No

I 20:12:30 Link Size: Auto

I 20:12:30 Lock Volume: Yes

I 20:12:30 Test Mode: No

I 20:12:30 OPC: No

I 20:12:30 BURN-Proof: Enabled

I 20:12:30 Write Speed Successfully Set! - Effective: 22,167 KB/s (16x)

I 20:12:30 Book Type Setting: DVD-ROM

I 20:12:30 Filling Buffer... (40 MB)

I 20:12:31 Writing LeadIn...

I 20:13:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 2123551)

I 20:13:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2123551)

I 20:17:43 Synchronising Cache...

I 20:17:44 Closing Track...

I 20:17:50 Finalising Disc...

I 20:18:22 Exporting Graph Data...

I 20:18:22 Graph Data File: C:\Documents and Settings\BadDog\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_MONDAY-OCTOBER-25-2010_8-12_PM_RITEK-F16-01_MAX.ibg

I 20:18:22 Export Successfully Completed!

I 20:18:22 Operation Successfully Completed! - Duration: 00:05:51

I 20:18:22 Average Write Rate: 15,444 KB/s (11.2x) - Maximum Write Rate: 22,107 KB/s (16.0x)

I 20:18:22 Cycling Tray before Verify...

W 20:18:32 Waiting for device to become ready...

I 20:18:44 Device Ready!

I 20:18:47 Operation Started!

I 20:18:47 Source Device: [5:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (D:) (ATA)

I 20:18:47 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: RITEK-F16-01) (Speeds: 4x, 8x, 12x, 16x)

I 20:18:47 Image File: Z:\Images\A Lamp in the Dark HQ Full 3hours\test.iso

I 20:18:47 Image File Sectors: 2,123,552 (MODE1/2048)

I 20:18:47 Image File Size: 4,349,034,496 bytes

I 20:18:47 Image File Volume Identifier: A Lamp in the Dark HQ Full 3hours

I 20:18:47 Image File Volume Set Identifier: 3D599AC100206701

I 20:18:47 Image File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!

I 20:18:47 Image File Implementation Identifier: ImgBurn

I 20:18:47 Image File File System(s): ISO9660, UDF (1.02)

I 20:18:47 Read Speed (Data/Audio): MAX / MAX

I 20:18:47 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2123551)

I 20:18:47 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2123551)

E 20:19:16 Miscompare at LBA: 7168, Offset: 2, File: \VIDEO_TS\VTS_01_0.VOB

E 20:19:16 Device: 0x00

E 20:19:16 Image File: 0x01

E 20:19:16 Total Errors in Sector: 1,965

E 20:19:16 Failed to Verify Sectors!

I 20:19:16 Exporting Graph Data...

I 20:19:16 Graph Data File: C:\Documents and Settings\BadDog\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_MONDAY-OCTOBER-25-2010_8-12_PM_RITEK-F16-01_MAX.ibg

I 20:19:16 Export Successfully Completed!

E 20:19:16 Operation Failed! - Duration: 00:00:28

I 20:19:16 Average Verify Rate: 512 KB/s (0.4x) - Maximum Verify Rate: 3,123 KB/s (2.3x)

________________________________________________________________________________________

 

Thanks in Advance!

[spinningwheel]

I 20:12:30 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 4x, 8x, 12x, 16x)

 

The following applies to single layer as well as dl discs.

 

http://forum.imgburn.com/index.php?showtopic=8000

 

I 20:12:30 Write Speed Successfully Set! - Effective: 22,167 KB/s (16x)

 

You can try other speeds also.

 

spinner

[BadDog]

I 20:12:30 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 4x, 8x, 12x, 16x)

 

The following applies to single layer as well as dl discs.

 

http://forum.imgburn.com/index.php?showtopic=8000

 

I 20:12:30 Write Speed Successfully Set! - Effective: 22,167 KB/s (16x)

 

You can try other speeds also.

 

spinner

 

Thanks for the reply Spinner. The disks which I am using are just memorex, however I've been using these exact same disks for years and never produced errors using these disks before. I have tried writing at 4x also however these errors persist.

[spinningwheel]

Change discs, Ritek is highly unreliable.

[BadDog]

Change discs, Ritek is highly unreliable.

 

I tried other types of media and all produce the same errors. I have used this same media to produce 'thousands' and 'thousands' of disks (I burn a lot of media) and practically 'never' (less than 1 in a hundred disks) receive errors using this media so I think I can say confidently that it is 'not' the media.

[ianymaty]

Try this new TN03 firmware for your drive http://www.firmwarehq.com/LG/GH22NS50/files.html

 

Cleaning the drive with a lens cleaning disc might help.

[BadDog]

Try this new TN03 firmware for your drive http://www.firmwarehq.com/LG/GH22NS50/files.html

 

Cleaning the drive with a lens cleaning disc might help.

 

 

Thanks ianymaty,

 

I didn't realize that there was a TN03 as I had recently updated to TN02. I just updated the firmware to TN03, unfortunately it did 'not' help as errors persist.

Q? I understand that IDE drives can be affected when more than one drive is connected to the same IDE channel ... Can sata DVD drives be affected by other sata hard drives?

[Cynthia]

No, not what I've heard of.

 

Tried a slower write speed, as 8x?

[BadDog]

No, not what I've heard of.

 

Tried a slower write speed, as 8x?

 

 

I tried 4x ... error persists.

Thanks!

[LIGHTNING UK!]

Try another drive... buy one if you need to.

[BadDog]

Try another drive... buy one if you need to.

 

 

Yes, I'm ordering another drive today ... It just seems odd as this writer is only a few weeks old. Problem is I bought it locally but lost my receipt. This particular reseller is not known for there customer service to begin with. I'd like to confirm that it is indeed the drive before I write it off.

 

Thanks