HMB Cyclist Posted November 20, 2010 Share Posted November 20, 2010 Hi All, Received write errors "invalid address" 2x with this image. I have burned previously to the same media. Firmware is up to date as far as I know. Any ideas? Thanks, Marc I 13:21:34 Average Write Rate: N/A - Maximum Write Rate: N/A I 13:23:07 Operation Started! I 13:23:07 Source File: I:\DVDFab\PETES_DRAGON_USA\PETES_DRAGON_USA.iso I 13:23:07 Source File Sectors: 3,577,179 (MODE1/2048) I 13:23:07 Source File Size: 7,326,062,592 bytes I 13:23:07 Source File Volume Identifier: PETES_DRAGON_USA I 13:23:07 Source File Volume Set Identifier: 3ABD69D4 I 13:23:07 Source File Implementation Identifier: MEI I 13:23:07 Source File File System(s): ISO9660, UDF (1.02) I 13:23:07 Destination Device: [1:0:0] PHILIPS DVD+-RW SDVD8820 AD20 (D:) (ATA) I 13:23:07 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 13:23:07 Destination Media Sectors: 4,173,824 I 13:23:07 Write Mode: DVD I 13:23:07 Write Type: DAO I 13:23:07 Write Speed: 2x I 13:23:07 Link Size: Auto I 13:23:07 Lock Volume: Yes I 13:23:07 Test Mode: No I 13:23:07 OPC: No I 13:23:07 BURN-Proof: Enabled I 13:23:09 Write Speed Successfully Set! - Effective: 2,770 KB/s (2x) I 13:26:06 Optimal L1 Data Zone Start LBA: 1941616 (VTS_06, PGC: 1, Cell: 42, Vob/Cell ID: 9/1, Time: 01:40:32, SPLIP: Yes -> No) I 13:26:06 Optimal L0 Data Zone Capacity: 1,941,616 I 13:26:06 Optimal L0 Data Zone Method: IFO Cell Boundary I 13:26:06 Set L0 Data Zone Capacity Succeeded! I 13:26:06 Filling Buffer... (40 MB) I 13:26:08 Writing LeadIn... I 13:26:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 3577178) I 13:26:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3577178) I 13:26:54 Writing Layer 0... (LBA: 0 - 1941615) I 13:46:44 Writing Layer 1... (LBA: 1941616 - 3577178) W 13:52:40 Waiting for buffers to recover... (LBA: 2513936) W 13:52:58 Waiting for hard disk activity to reach threshold level... I 13:53:05 Writing Sectors... W 13:54:14 Waiting for buffers to recover... (LBA: 2622416) W 13:54:34 Waiting for hard disk activity to reach threshold level... I 13:54:56 Writing Sectors... W 13:57:25 Waiting for buffers to recover... (LBA: 2857360) W 13:58:15 Waiting for hard disk activity to reach threshold level... I 13:58:20 Writing Sectors... W 13:58:57 Waiting for buffers to recover... (LBA: 2909744) W 13:59:13 Waiting for hard disk activity to reach threshold level... I 13:59:13 Writing Sectors... W 14:02:41 Waiting for buffers to recover... (LBA: 3242608) W 14:03:36 Waiting for hard disk activity to reach threshold level... I 14:07:08 Writing Sectors... W 14:07:15 Failed to Write Sectors 3242608 - 3242639 - Reason: Invalid Address For Write W 14:07:15 Retrying (1 of 20)... W 14:07:20 Retry Failed - Reason: Invalid Address For Write W 14:07:20 Retrying (2 of 20)... W 14:07:24 Retry Failed - Reason: Invalid Address For Write W 14:07:24 Retrying (3 of 20)... W 14:07:28 Retry Failed - Reason: Invalid Address For Write W 14:07:28 Retrying (4 of 20)... W 14:07:32 Retry Failed - Reason: Invalid Address For Write W 14:07:32 Retrying (5 of 20)... W 14:07:36 Retry Failed - Reason: Invalid Address For Write W 14:07:36 Retrying (6 of 20)... W 14:07:40 Retry Failed - Reason: Invalid Address For Write W 14:07:40 Retrying (7 of 20)... W 14:07:45 Retry Failed - Reason: Invalid Address For Write W 14:07:45 Retrying (8 of 20)... W 14:07:49 Retry Failed - Reason: Invalid Address For Write W 14:07:49 Retrying (9 of 20)... W 14:07:53 Retry Failed - Reason: Invalid Address For Write W 14:07:53 Retrying (10 of 20)... W 14:07:57 Retry Failed - Reason: Invalid Address For Write W 14:07:57 Retrying (11 of 20)... W 14:08:03 Retry Failed - Reason: Invalid Address For Write W 14:08:03 Retrying (12 of 20)... W 14:08:07 Retry Failed - Reason: Invalid Address For Write W 14:08:07 Retrying (13 of 20)... W 14:08:11 Retry Failed - Reason: Invalid Address For Write W 14:08:11 Retrying (14 of 20)... W 14:08:15 Retry Failed - Reason: Invalid Address For Write W 14:08:15 Retrying (15 of 20)... W 14:08:19 Retry Failed - Reason: Invalid Address For Write W 14:08:19 Retrying (16 of 20)... W 14:08:23 Retry Failed - Reason: Invalid Address For Write W 14:08:23 Retrying (17 of 20)... W 14:08:27 Retry Failed - Reason: Invalid Address For Write W 14:08:27 Retrying (18 of 20)... W 14:08:32 Retry Failed - Reason: Invalid Address For Write W 14:08:32 Retrying (19 of 20)... W 14:08:36 Retry Failed - Reason: Invalid Address For Write W 14:08:36 Retrying (20 of 20)... W 14:08:40 Retry Failed - Reason: Invalid Address For Write W 14:18:13 Retrying (21)... W 14:18:20 Retry Failed - Reason: Invalid Address For Write E 14:18:39 Failed to Write Sectors 3242608 - 3242639 - Reason: Invalid Address For Write E 14:18:39 Next Writable Address: 3242544 I 14:18:39 Synchronising Cache... W 14:18:43 User opted to skip the 'Close Track/Session/Disc' functions. E 14:18:43 Failed to Write Image! I 14:18:44 Exporting Graph Data... I 14:18:44 Graph Data File: C:\Documents and Settings\The King\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_SDVD8820_AD20_SATURDAY-NOVEMBER-20-2010_1-23_PM_MKM-001-00_2x.ibg I 14:18:44 Export Successfully Completed! E 14:18:44 Operation Failed! - Duration: 00:55:36 I 14:18:44 Average Write Rate: 2,089 KB/s (1.5x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 14:20:18 Operation Started! I 14:20:18 Source File: I:\DVDFab\PETES_DRAGON_USA\PETES_DRAGON_USA.iso I 14:20:18 Source File Sectors: 3,577,179 (MODE1/2048) I 14:20:18 Source File Size: 7,326,062,592 bytes I 14:20:18 Source File Volume Identifier: PETES_DRAGON_USA I 14:20:18 Source File Volume Set Identifier: 3ABD69D4 I 14:20:18 Source File Implementation Identifier: MEI I 14:20:18 Source File File System(s): ISO9660, UDF (1.02) I 14:20:18 Destination Device: [1:0:0] PHILIPS DVD+-RW SDVD8820 AD20 (D:) (ATA) I 14:20:18 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 14:20:18 Destination Media Sectors: 4,173,824 I 14:20:18 Write Mode: DVD I 14:20:18 Write Type: DAO I 14:20:18 Write Speed: 2x I 14:20:18 Link Size: Auto I 14:20:18 Lock Volume: Yes I 14:20:18 Test Mode: No I 14:20:18 OPC: No I 14:20:18 BURN-Proof: Enabled I 14:20:20 Write Speed Successfully Set! - Effective: 2,770 KB/s (2x) I 14:20:29 Optimal L1 Data Zone Start LBA: 1941616 (VTS_06, PGC: 1, Cell: 42, Vob/Cell ID: 9/1, Time: 01:40:32, SPLIP: No) I 14:20:29 Optimal L0 Data Zone Capacity: 1,941,616 I 14:20:29 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 14:20:29 Set L0 Data Zone Capacity Succeeded! I 14:20:29 Filling Buffer... (40 MB) I 14:20:31 Writing LeadIn... I 14:21:15 Writing Session 1 of 1... (1 Track, LBA: 0 - 3577178) I 14:21:15 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3577178) I 14:21:15 Writing Layer 0... (LBA: 0 - 1941615) I 14:41:05 Writing Layer 1... (LBA: 1941616 - 3577178) W 14:55:20 Waiting for buffers to recover... (LBA: 3329616) W 14:56:23 Waiting for hard disk activity to reach threshold level... I 15:08:38 Writing Sectors... W 15:08:45 Failed to Write Sectors 3329616 - 3329647 - Reason: Invalid Address For Write W 15:08:45 Retrying (1 of 20)... W 15:08:49 Retry Failed - Reason: Invalid Address For Write W 15:08:49 Retrying (2 of 20)... W 15:08:54 Retry Failed - Reason: Invalid Address For Write W 15:08:54 Retrying (3 of 20)... W 15:08:58 Retry Failed - Reason: Invalid Address For Write W 15:08:58 Retrying (4 of 20)... W 15:09:02 Retry Failed - Reason: Invalid Address For Write W 15:09:02 Retrying (5 of 20)... W 15:09:06 Retry Failed - Reason: Invalid Address For Write W 15:09:06 Retrying (6 of 20)... W 15:09:10 Retry Failed - Reason: Invalid Address For Write W 15:09:10 Retrying (7 of 20)... W 15:09:14 Retry Failed - Reason: Invalid Address For Write W 15:09:14 Retrying (8 of 20)... W 15:09:18 Retry Failed - Reason: Invalid Address For Write W 15:09:18 Retrying (9 of 20)... W 15:09:22 Retry Failed - Reason: Invalid Address For Write W 15:09:22 Retrying (10 of 20)... W 15:09:26 Retry Failed - Reason: Invalid Address For Write W 15:09:26 Retrying (11 of 20)... W 15:09:30 Retry Failed - Reason: Invalid Address For Write W 15:09:30 Retrying (12 of 20)... W 15:09:34 Retry Failed - Reason: Invalid Address For Write W 15:09:34 Retrying (13 of 20)... W 15:09:39 Retry Failed - Reason: Invalid Address For Write W 15:09:39 Retrying (14 of 20)... W 15:09:43 Retry Failed - Reason: Invalid Address For Write W 15:09:43 Retrying (15 of 20)... W 15:09:47 Retry Failed - Reason: Invalid Address For Write W 15:09:47 Retrying (16 of 20)... W 15:09:51 Retry Failed - Reason: Invalid Address For Write W 15:09:51 Retrying (17 of 20)... W 15:09:55 Retry Failed - Reason: Invalid Address For Write W 15:09:55 Retrying (18 of 20)... W 15:09:59 Retry Failed - Reason: Invalid Address For Write W 15:09:59 Retrying (19 of 20)... W 15:10:03 Retry Failed - Reason: Invalid Address For Write W 15:10:03 Retrying (20 of 20)... W 15:10:07 Retry Failed - Reason: Invalid Address For Write W 15:10:36 Retrying (21)... W 15:10:41 Retry Failed - Reason: Invalid Address For Write E 15:10:49 Failed to Write Sectors 3329616 - 3329647 - Reason: Invalid Address For Write E 15:10:49 Next Writable Address: 3329520 I 15:10:49 Synchronising Cache... I 15:10:55 Closing Track... I 15:10:57 Finalising Disc... E 15:18:04 Failed to Write Image! I 15:18:04 Exporting Graph Data... I 15:18:04 Graph Data File: C:\Documents and Settings\The King\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_SDVD8820_AD20_SATURDAY-NOVEMBER-20-2010_2-20_PM_MKM-001-00_2x.ibg I 15:18:04 Export Successfully Completed! E 15:18:04 Operation Failed! - Duration: 00:57:45 I 15:18:04 Average Write Rate: 2,239 KB/s (1.6x) - Maximum Write Rate: 3,387 KB/s (2.4x) Link to comment Share on other sites More sharing options...
Cynthia Posted November 21, 2010 Share Posted November 21, 2010 The laser head might need a cleaning disc. The drive I: is that a hard disk? Link to comment Share on other sites More sharing options...
HMB Cyclist Posted November 21, 2010 Author Share Posted November 21, 2010 The laser head might need a cleaning disc. The drive I: is that a hard disk? Thanks. Yes, I is a hard disk partition. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 21, 2010 Share Posted November 21, 2010 Stop using the physical hdd that I: is part of during the burn. You're only burning at 2.4x so the transfer rate required is tiny and your system shouldn't be having the problems it is (buffering issues). Link to comment Share on other sites More sharing options...
HMB Cyclist Posted November 21, 2010 Author Share Posted November 21, 2010 Thanks for your replies. I cleaned my DVD laser head and turned off Norton internet security auto updates and background scans. That seemed to do the trick. I was not using the computer for anything else during the burn process so figured Norton must be the problem. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 21, 2010 Share Posted November 21, 2010 Do you ever defrag the drive? Link to comment Share on other sites More sharing options...
Recommended Posts