Miscompares & unrecovered read error

[Shooter]

Created a .iso & .mds in order to burn to another disk.

Not sure what caused this failure on "verify". Disk seems to played ok, didn't watch from beginning to end just checked chapter stops. Since having this failure updated program to newest version 2.5.2.0, haven't retried yet. Posted log...sorry for the log size, not sure if the multiple miscompare are of any help

Had another error with another burn which I will start another thread

 

Steve

 

I 21:01:58 ImgBurn Version 2.5.0.0 started!

I 21:01:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 21:01:58 Total Physical Memory: 2,095,180 KB - Available: 1,283,144 KB

W 21:01:58 Drive Z:\ (FAT) might not support single files > 4 GB in size.

I 21:01:58 Initialising SPTI...

I 21:01:58 Searching for SCSI / ATAPI devices...

I 21:01:58 Found 1 DVD-ROM and 1 DVD±RW!

I 21:04:11 Operation Started!

I 21:04:11 Source File: G:\removed.MDS

I 21:04:11 Source File Sectors: 3,774,192 (MODE1/2048)

I 21:04:11 Source File Size: 7,729,545,216 bytes

I 21:04:11 Source File Volume Identifier: removed

I 21:04:11 Source File Volume Set Identifier: 398A8B54

I 21:04:11 Source File Implementation Identifier: VSO Software

I 21:04:11 Source File File System(s): ISO9660, UDF (1.02)

I 21:04:11 Destination Device: [0:1:0] PHILIPS DVD+-RW DVD8701 5D24 (E:) (ATA)

I 21:04:11 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x)

I 21:04:11 Destination Media Sectors: 4,173,824

I 21:04:11 Write Mode: DVD

I 21:04:11 Write Type: DAO

I 21:04:11 Write Speed: 2.4x

I 21:04:11 Link Size: Auto

I 21:04:11 Lock Volume: Yes

I 21:04:11 Test Mode: No

I 21:04:11 OPC: No

I 21:04:11 BURN-Proof: Enabled

I 21:04:11 Optimal L0 Data Zone Capacity: 2,029,296

I 21:04:11 Optimal L0 Data Zone Method: Copied From Original Disc

I 21:04:11 Set L0 Data Zone Capacity Succeeded!

I 21:04:11 Filling Buffer... (40 MB)

I 21:04:12 Writing LeadIn...

I 21:04:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 3774191)

I 21:04:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3774191)

I 21:04:22 Writing Layer 0... (LBA: 0 - 2029295)

I 21:26:18 Writing Layer 1... (LBA: 2029296 - 3774191)

I 21:45:00 Synchronising Cache...

I 21:45:01 Closing Track...

I 21:45:10 Finalising Disc...

I 21:49:38 Exporting Graph Data...

I 21:49:39 Graph Data File: C:\Documents and Settings\Steven\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_TUESDAY-NOVEMBER-23-2010_9-04_PM_MKM-001-00_2.4x.ibg

I 21:49:39 Export Successfully Completed!

I 21:49:39 Operation Successfully Completed! - Duration: 00:45:27

I 21:49:39 Average Write Rate: 3,097 KB/s (2.2x) - Maximum Write Rate: 3,360 KB/s (2.4x)

I 21:49:39 Cycling Tray before Verify...

W 21:49:49 Waiting for device to become ready...

I 21:50:04 Device Ready!

I 21:50:06 Operation Started!

I 21:50:06 Source Device: [0:1:0] PHILIPS DVD+-RW DVD8701 5D24 (E:) (ATA)

I 21:50:06 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x)

I 21:50:06 Image File: G:\removed.MDS

I 21:50:06 Image File Sectors: 3,774,192 (MODE1/2048)

I 21:50:06 Image File Size: 7,729,545,216 bytes

I 21:50:06 Image File Volume Identifier: removed

I 21:50:06 Image File Volume Set Identifier: 398A8B54

I 21:50:06 Image File Implementation Identifier: VSO Software

I 21:50:06 Image File File System(s): ISO9660, UDF (1.02)

I 21:50:06 Read Speed (Data/Audio): MAX / MAX

I 21:50:06 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3774191)

I 21:50:06 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3774191)

I 21:50:06 Verifying Layer 0... (LBA: 0 - 2086911)

W 22:02:33 Miscompare at LBA: 2029296, Offset: 2, File: \VIDEO_TS\VTS_01_4.VOB

W 22:02:33 Device: 0x00

W 22:02:33 Image File: 0x01

W 22:02:33 Total Errors in Sector: 262

I 22:02:33 Verifying Sectors...

 

SNIPPED OUT MISCOMPARES

 

 

W 22:02:51 Miscompare at LBA: 2030291, Offset: 2, File: \VIDEO_TS\VTS_01_4.VOB

W 22:02:51 Device: 0x00

W 22:02:51 Image File: 0x01

W 22:02:51 Total Errors in Sector: 1,939

I 22:02:51 Verifying Sectors...

W 22:02:51 Miscompare at LBA: 2030292, Offset: 2, File: \VIDEO_TS\VTS_01_4.VOB

W 22:02:51 Device: 0x00

W 22:02:51 Image File: 0x01

W 22:02:51 Total Errors in Sector: 1,944

I 22:02:51 Verifying Sectors...

W 22:02:51 Miscompare at LBA: 2030293, Offset: 2, File: \VIDEO_TS\VTS_01_4.VOB

W 22:02:51 Device: 0x00

W 22:02:51 Image File: 0x01

W 22:02:51 Total Errors in Sector: 1,946

I 22:02:51 Verifying Sectors...

W 22:02:51 Miscompare at LBA: 2030294, Offset: 2, File: \VIDEO_TS\VTS_01_4.VOB

W 22:02:51 Device: 0x00

W 22:02:51 Image File: 0x01

W 22:02:51 Total Errors in Sector: 1,942

I 22:02:51 Verifying Sectors...

W 22:02:51 Miscompare at LBA: 2030295, Offset: 2, File: \VIDEO_TS\VTS_01_4.VOB

W 22:02:51 Device: 0x00

W 22:02:51 Image File: 0x01

W 22:02:51 Total Errors in Sector: 1,938

W 22:02:51 Arrrrgggh! Too Many 'Miscompare' Messages!

W 22:02:51 'Miscompare' logging has been halted for now.

I 22:02:51 Verifying Sectors...

W 22:03:10 Failed to Read Sector 2072304 - Reason: Unrecovered Read Error

W 22:03:10 Sector 2072304 maps to File: \VIDEO_TS\VTS_01_4.VOB

W 22:04:21 Failed to Read Sector 2072304 - Reason: Unrecovered Read Error

W 22:04:21 Sector 2072304 maps to File: \VIDEO_TS\VTS_01_4.VOB

W 22:04:28 Failed to Read Sector 2072305 - Reason: Unrecovered Read Error

W 22:04:28 Sector 2072305 maps to File: \VIDEO_TS\VTS_01_4.VOB

W 22:04:31 Failed to Read Sector 2072305 - Reason: Unrecovered Read Error

W 22:04:31 Sector 2072305 maps to File: \VIDEO_TS\VTS_01_4.VOB

W 22:04:33 Failed to Read Sector 2072306 - Reason: Unrecovered Read Error

W 22:04:33 Sector 2072306 maps to File: \VIDEO_TS\VTS_01_4.VOB

W 22:04:35 Retrying (1)...

W 22:04:37 Retry Failed - Reason: Unrecovered Read Error

E 22:04:39 Failed to Read Sector 2072306 - Reason: Unrecovered Read Error

E 22:04:39 Sector 2072306 maps to File: \VIDEO_TS\VTS_01_4.VOB

E 22:04:39 Failed to Verify Sectors!

I 22:04:39 Exporting Graph Data...

I 22:04:39 Graph Data File: C:\Documents and Settings\Steven\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_TUESDAY-NOVEMBER-23-2010_9-04_PM_MKM-001-00_2.4x.ibg

I 22:04:39 Export Successfully Completed!

E 22:04:39 Operation Failed! - Duration: 00:14:32

I 22:04:39 Average Verify Rate: 4,752 KB/s (3.4x) - Maximum Verify Rate: 16,541 KB/s (11.9x)

Edited November 24, 2010 by Shooter

[Shooter]

Tried burning a .MDS to DL disk, encountered "verify failed" then "layouts do not match" messages. Here's the log

 

I 15:13:34 ImgBurn Version 2.5.2.0 started!

I 15:13:34 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 15:13:34 Total Physical Memory: 2,095,180 KB - Available: 1,524,504 KB

I 15:13:34 Initialising SPTI...

I 15:13:34 Searching for SCSI / ATAPI devices...

I 15:13:34 -> Drive 1 - Info: TSSTcorp DVD-ROM TS-H352C DE02 (D:) (ATA)

I 15:13:34 -> Drive 2 - Info: PHILIPS DVD+-RW DVD8701 5D24 (E:) (ATA)

I 15:13:34 Found 1 DVD-ROM and 1 DVD±RW!

I 15:16:59 Operation Started!

I 15:16:59 Source File: H:\removed.mds

I 15:16:59 Source File Sectors: 4,059,616 (MODE1/2048)

I 15:16:59 Source File Size: 8,314,093,568 bytes

I 15:16:59 Source File Volume Identifier: removed

I 15:16:59 Source File Volume Set Identifier: 3B139CC4003DF1D6

I 15:16:59 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER!

I 15:16:59 Source File Implementation Identifier: ImgBurn

I 15:16:59 Source File File System(s): ISO9660, UDF (1.02)

I 15:16:59 Destination Device: [0:1:0] PHILIPS DVD+-RW DVD8701 5D24 (E:) (ATA)

I 15:16:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x)

I 15:16:59 Destination Media Sectors: 4,173,824

I 15:16:59 Write Mode: DVD

I 15:16:59 Write Type: DAO

I 15:16:59 Write Speed: 4x

I 15:16:59 Link Size: Auto

I 15:16:59 Lock Volume: Yes

I 15:16:59 Test Mode: No

I 15:16:59 OPC: No

I 15:16:59 BURN-Proof: Enabled

I 15:16:59 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 15:16:59 Optimal L0 Data Zone Capacity: 2,029,808

I 15:16:59 Optimal L0 Data Zone Method: Copied From Original Disc

I 15:16:59 Set L0 Data Zone Capacity Succeeded!

I 15:16:59 Filling Buffer... (40 MB)

I 15:17:00 Writing LeadIn...

I 15:17:13 Writing Session 1 of 1... (1 Track, LBA: 0 - 4059615)

I 15:17:13 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4059615)

I 15:17:13 Writing Layer 0... (LBA: 0 - 2029807)

I 15:30:22 Writing Layer 1... (LBA: 2029808 - 4059615)

I 15:43:32 Synchronising Cache...

I 15:43:33 Closing Track...

I 15:43:38 Finalising Disc...

I 15:44:39 Exporting Graph Data...

I 15:44:39 Graph Data File: C:\Documents and Settings\Steven\Application Data\ImgBurn\Graph Data Files\PHILIPS_DVD+-RW_DVD8701_5D24_WEDNESDAY-NOVEMBER-24-2010_3-16_PM_MKM-001-00_4x.ibg

I 15:44:39 Export Successfully Completed!

I 15:44:39 Operation Successfully Completed! - Duration: 00:27:39

I 15:44:39 Average Write Rate: 5,145 KB/s (3.7x) - Maximum Write Rate: 5,592 KB/s (4.0x)

I 15:44:39 Cycling Tray before Verify...

W 15:44:51 Waiting for device to become ready...

I 15:45:05 Device Ready!

E 15:45:06 Verify Failed! - Reason: Layouts do not match.

 

Here is the Read mode info

 

PHILIPS DVD+-RW DVD8701 5D24 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Incomplete

State of Last Session: Incomplete

Erasable: No

Free Sectors: 2,101,008

Free Space: 4,302,864,384 bytes

Free Time: 466:55:33 (MM:SS:FF)

Next Writable Address: 2072816

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - -1)

-> LeadOut (LBA: 0)

 

Physical Format Information (ADIP - L0):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L1):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Haven't cleaned or updated firmware on the drive yet. Didn't see a driver update on Dell's site, but did see one here...philips8701 is this the right one if needed

 

Thanks in advance for the help

Steve

[LIGHTNING UK!]

Your drive doesn't seem to have closed the disc properly... maybe the firmware update will help. (Yes it should be the right one)

 

You could always try the other supported write speeds too.

[Shooter]

Your drive doesn't seem to have closed the disc properly... maybe the firmware update will help. (Yes it should be the right one)

 

You could always try the other supported write speeds too.

 

Thanks for trying to help !!

 

I did download firmware update.Did find a matching firmware on Dell's site and Firmware HQ....completely confused on the next step keep getting "invalid drive specification" errors probably (fat vs ntfs issue).

 

Did try to follow instructions Dell everything falls apart on my part with step 5 & 6

 

Only way I can get a A: prompt is to use Win xp to create a ms-dos start-up disk

 

1st disk error burned at 2.4x

2nd disk error burned at 4x

 

I know disk quality shouldn't be a issue.

 

Thanks

Steve

[Shooter]

Wanted as a test to try on my Laptop to see how it would do !! I'm not surprised to see that it worked Never any doubts with the program. I really don't want to have to use the laptop to do my burning tho.

 

At least I've narrowed it down to the philips dvd8701 as the likely culprit. Now all I have to figure out how to update the firmware, to at least eliminate that.

 

For my test (which was the 1st error - miscompares & unrecovered read errors) I used the same disk to create .iso / .mds and burn and verify at 2.4x.Time it took was 44 minutes and 32 minutes to verify. Not sure how that is for efficiency ??

 

Laptop specs

Microsoft Windows 7 Home Premium

Intel® Core2 Duo CPU T5800 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s)

DVD Writer :Optiarc BD ROM BC-5500S ATA Device

 

 

Steve

 

 

 

Edited November 25, 2010 by Shooter

[LIGHTNING UK!]

Is that philips drive actually in a Dell PC (or did it at least come from a Dell PC) ?

 

If not, that would explain why it won't accept the firmware update.

[Shooter]

Is that philips drive actually in a Dell PC (or did it at least come from a Dell PC) ?

 

If not, that would explain why it won't accept the firmware update.

 

Yes the drive is in a Dell PC,original setup...4 1/2 years old. I really don't burn a lot. It actually has 2 DVD drives one for playing and one for burning (Philips)

 

Thanks LUK

 

Steve