hyphy Posted July 10, 2006 Share Posted July 10, 2006 hi ijust downloade Imgburn to burn my dvd copy from dvd shrink it burns great but the problem is my dvd players is reading the dvd it say no audio data , but when i played it on my pc it works fine I used ripit4me to rip the dvd then dvdshrink! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 10, 2006 Share Posted July 10, 2006 'no audio data' is a bit of a weird message. I've seen them say 'no disc' etc but not 'no audio'. Does your player support the discs you're using? Have you just tried 1 disc? Did you only save the DTS track or something and your player doesn't support DTS? If you're using DVD+R media, see if your drive supports / is configured for bitsetting to DVDROM. Also check you're using decent media in the first place. Maybe your player just can't read them full stop. If it burns and verifies ok, there is nothing wrong with the actual burn itself, the problem lies elsewhere I'm afraid. Link to comment Share on other sites More sharing options...
hyphy Posted July 10, 2006 Author Share Posted July 10, 2006 how do u check for bitsetting ? Link to comment Share on other sites More sharing options...
polopony Posted July 10, 2006 Share Posted July 10, 2006 in the lower right hand corner of IMGburn's main window you'll see a little icon that looks like a book click on it and a window will open showing different drives if your drive is listed click on that and where it says "change for" click on the drop down menu arrow for your options, choose one and below that you'll see "new setting " you select from the drop down DVD-ROM, this makes your player think the disc is a factory pressed dvd .You leave out a lot of info in your post the best thing when coming here with a problem is to post a log of the burn which has all sorts of info we can use . In shrink you want to leave the AC3 audio unless you have hardware that can play the DTS like Lightning says .The error you posted I've never seen either .It does sound like you re authored the disc incorrectly.get back with some info and we'll clear up the problem Link to comment Share on other sites More sharing options...
lfcrule1972 Posted July 11, 2006 Share Posted July 11, 2006 I am assuming there are no audio options accessible via your DVD remote control ? I had a dvd once that needed me to select a different audio option for the sound to play. On the PC it did it automatically...... Link to comment Share on other sites More sharing options...
Recommended Posts