plus1hdcp Posted July 10, 2006 Posted July 10, 2006 Does anyone know a workaround I can try reference this error I have a Sony DVD RW DW-D22A drive in which I am attempting to use the double layer burn so that I do not have to compress I use DVDFab Decrypter PgcEdit ImgBurn I haven't been experiencing any issues when compressing on 4.7 discs. Thanks for looking at this. Here is a log I 14:11:54 Test Mode: No I 14:11:54 BURN-Proof: Enabled I 14:11:54 Optimal L1 Data Zone Start LBA: 1980848 (VTS_02, PGC: 1, Cell: 17) I 14:11:54 Optimal L0 Data Zone Capacity: 1,980,848 I 14:11:54 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 14:12:52 Filling Buffer... I 14:12:53 Writing LeadIn... I 14:13:49 Writing Image... I 14:13:49 Writing Layer 0... (LBA: 0 - 1980847) I 14:33:55 Writing Layer 1... (LBA: 1980848 - 3961680) I 14:54:59 Synchronising Cache... I 14:55:02 Closing Track... I 14:56:04 Finalising Disc... W 14:57:14 Potential 'WaitImmediateIO' Deferred Error - Session Fixation Error Writing Lead In W 15:10:00 Potential 'WaitImmediateIO' Deferred Error - Session Fixation Error Writing Lead In E 15:12:00 Finalise Disc Failed! - Reason: No Additional Sense Information I 15:12:00 Operation Successfully Completed! - Duration: 01:00:05 I 15:12:00 Average Write Rate: 3,207 KB/s (2.3x) - Maximum Write Rate: 3,499 KB/s (2.5x) I 15:12:00 Cycling Tray before Verify...
cornholio7 Posted July 10, 2006 Posted July 10, 2006 it would be good if we could see the whole log please
LIGHTNING UK! Posted July 10, 2006 Posted July 10, 2006 Without seeing the log (as mentioned above), these are just guesses. 1. You're using Ritek DL media. STOP. 2. Your firmware it old and needs updating. Always use Verbatim DVD+R DL media. If you're already on the latest Sony firmware, try crossflashing to the real LiteOn 1633 version.
plus1hdcp Posted July 11, 2006 Author Posted July 11, 2006 I'll try with Verbatim media and report back. I used Memorex DL, I'll search for reports on their media. The firmware is up to date, perhaps I'll try the crossflashing. Thank you Without seeing the log (as mentioned above), these are just guesses. 1. You're using Ritek DL media. STOP. 2. Your firmware it old and needs updating. Always use Verbatim DVD+R DL media. If you're already on the latest Sony firmware, try crossflashing to the real LiteOn 1633 version.
plus1hdcp Posted July 12, 2006 Author Posted July 12, 2006 Same problem with Verbatim media here is the log I 21:20:32 ImgBurn Version 1.3.0.0 started! I 21:20:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:20:32 Initialising SPTI... I 21:20:32 Searching for SCSI / ATAPI devices... I 21:20:32 Found 1 DVD-ROM and 1 DVD?RW! I 21:21:01 Operation Started! I 21:21:01 Source File: D:\DVD.ISO I 21:21:01 Source File Sectors: 3,961,681 (MODE1/2048) I 21:21:01 Source File Size: 8,113,522,688 bytes I 21:21:01 Source File Volume Identifier: DVD I 21:21:01 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 21:21:01 Source File Implementation Identifier: mkisofs I 21:21:01 Source File UDF Revision: 1.02 I 21:21:01 Destination Device: [0:3:0] SONY DVD RW DW-D22A BYS2 (F:) (ATA) I 21:21:01 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 21:21:01 Destination Media Sectors: 4,173,824 I 21:21:01 Write Mode: DVD I 21:21:01 Write Type: DAO I 21:21:01 Write Speed: MAX I 21:21:01 Link Size: Auto I 21:21:01 Test Mode: No I 21:21:01 BURN-Proof: Enabled I 21:21:01 Optimal L1 Data Zone Start LBA: 1980848 (VTS_02, PGC: 1, Cell: 17) I 21:21:01 Optimal L0 Data Zone Capacity: 1,980,848 I 21:21:01 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 21:21:33 Filling Buffer... I 21:21:35 Writing LeadIn... I 21:21:37 Writing Image... I 21:21:37 Writing Layer 0... (LBA: 0 - 1980847) I 21:41:43 Writing Layer 1... (LBA: 1980848 - 3961680) I 22:01:56 Synchronising Cache... I 22:01:58 Closing Track... I 22:01:59 Finalising Disc... W 22:02:41 Potential 'WaitImmediateIO' Deferred Error - Session Fixation Error Writing Lead Out W 22:04:44 Potential 'WaitImmediateIO' Deferred Error - Session Fixation Error Writing Lead Out W 22:07:04 Potential 'WaitImmediateIO' Deferred Error - Session Fixation Error Writing Lead Out E 22:07:11 Finalise Disc Failed! - Reason: No Additional Sense Information I 22:07:14 Operation Successfully Completed! - Duration: 00:46:10 I 22:07:14 Average Write Rate: 3,276 KB/s (2.4x) - Maximum Write Rate: 3,499 KB/s (2.5x) I 22:07:14 Cycling Tray before Verify... W 22:07:20 Waiting for device to become ready... I 22:10:49 Abort Request Acknowledged E 22:10:49 Device Not Ready - Medium Not Present E 22:10:49 Operation Aborted! I am going to try to reflash the DVD writer. Will report back. Any ideas you may see from the log will be appreciated.
lfcrule1972 Posted July 12, 2006 Posted July 12, 2006 Well LUK! is right there is a later firmware - BYS3, but my usual place for firmware updates - www.rpc1.org doesn't have it available altho it does mention it Not seen that before.... See if you can get it via a Google search....
kevdriver Posted July 12, 2006 Posted July 12, 2006 Plus1, go here for new firmware: http://www.cdr.cz/dvd_rekordery/son...22a/BYS3WIN.zip Hope this is what your looking for and solves your problem.
blutach Posted July 14, 2006 Posted July 14, 2006 Write speed = Max. Set it to 2.4x in PgcEdit when you make your ISO. Regards
Recommended Posts