vitorassuena Posted December 10, 2010 Posted December 10, 2010 (edited) Hello. Well, first of all I'd like to congratulate everyone on the staff or everyone that helps and makes this forums what it is. This software is great, I use it everytime, but I'm facing a small problem. When i'm going to burn a DVD, I choose my speed, usually 2X, but apparently the ImgBurn doesnt't accept it and gives this error. W 11:15:31 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 11.079 KB/s (8x)W 11:15:31 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 11.079 KB/s (8x) W 11:15:31 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 5.540 KB/s (4x) / 11.079 KB/s (8x) I can still burn my DVD without a problem, but I'm afraid some time movie/software will be damaged by this speed. So, what can I do? Thank you Edited December 10, 2010 by vitorassuena
vitorassuena Posted December 10, 2010 Author Posted December 10, 2010 Ohh, I already closed it. Is there any place where this logs keep stored?
LIGHTNING UK! Posted December 10, 2010 Posted December 10, 2010 Look in the 'Help' menu within ImgBurn.
vitorassuena Posted December 10, 2010 Author Posted December 10, 2010 I 11:15:08 ImgBurn Version 2.5.3.0 started! I 11:15:08 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 11:15:08 Total Physical Memory: 1.047.792 KB - Available: 292.288 KB I 11:15:08 Initialising SPTI... I 11:15:08 Searching for SCSI / ATAPI devices... I 11:15:09 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-H42N RL00 (D:) (ATA) I 11:15:09 -> Drive 2 - Info: SONY CD-RW CRX225E QYB2 (E:) (ATA) I 11:15:09 Found 1 CD-RW and 1 DVD±RW/RAM! I 11:15:31 Operation Started! I 11:15:31 Source File: C:\Documents and Settings\Jorge\Meus documentos\Downloads\Se.Beber.Nao.Case.DVDR-ZAMENGO.ISO I 11:15:31 Source File Sectors: 2.261.393 (MODE1/2048) I 11:15:31 Source File Size: 4.631.332.864 bytes I 11:15:31 Source File Volume Identifier: THE_HANGOVER I 11:15:31 Source File Volume Set Identifier: 3B37542C I 11:15:31 Source File Implementation Identifier: UDF Toshiba DVD Video I 11:15:31 Source File File System(s): ISO9660; UDF (1.02) I 11:15:31 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-H42N RL00 (D:) (ATA) I 11:15:31 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 4x; 8x) I 11:15:31 Destination Media Sectors: 2.297.888 I 11:15:31 Write Mode: DVD I 11:15:31 Write Type: DAO I 11:15:31 Write Speed: 2x I 11:15:31 Link Size: Auto I 11:15:31 Lock Volume: Yes I 11:15:31 Test Mode: No I 11:15:31 OPC: No I 11:15:31 BURN-Proof: Enabled W 11:15:31 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 11.079 KB/s (8x) W 11:15:31 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 11.079 KB/s (8x) W 11:15:31 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 5.540 KB/s (4x) / 11.079 KB/s (8x) I 11:16:17 Filling Buffer... (40 MB) I 11:16:18 Writing LeadIn... I 11:16:46 Writing Session 1 of 1... (1 Track, LBA: 0 - 2261392) I 11:16:46 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2261392) I 11:30:42 Synchronising Cache... I 11:31:06 Exporting Graph Data... I 11:31:06 Graph Data File: C:\Documents and Settings\Jorge\Dados de aplicativos\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-H42N_RL00_SEXTA-FEIRA-10-DE-DEZEMBRO-DE-2010_11-15_CMC_MAG._AE1_2x.ibg I 11:31:06 Export Successfully Completed! I 11:31:06 Operation Successfully Completed! - Duration: 00:15:30 I 11:31:06 Average Write Rate: 5.416 KB/s (3.9x) - Maximum Write Rate: 5.592 KB/s (4.0x) I 11:31:06 Close Request Acknowledged I 11:31:06 Closing Down... I 11:31:06 Shutting down SPTI... I 11:31:06 ImgBurn closed!
LIGHTNING UK! Posted December 10, 2010 Posted December 10, 2010 I 11:15:31 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 4x; 8x) Ok so 2x isn't a supported speed for your drive/firmware/media combo. You're getting the 'MODE SENSE, GET PERFORMANCE' messages because the firmware on your drive isn't reporting the info it should do. (i.e. it's buggy) The 'Wanted, Got' one is there to say you asked for a speed the drive doesn't appear to support and the other listed speed (or speeds in your case) look like they're going to be used instead. All this info comes from the drive, ImgBurn just displays it for you so you're aware of it. p.s. update the firmware on your drive to RL01 http://www.firmwarehq.com/LG/GSA-H42N/files.html
Recommended Posts