Jump to content

There does not appear to be enough space on the disk to burn this image.


Shadow187

Recommended Posts

"There does not appear to be enough space on the disk to burn this image."

 

Very new to this application and after following the guides to make an ISO then burn it, I got that error. I used to use dvd shrink but lost my nero so that does not work anymore. This is a new disc and have tried it with three other blanks. Any guidance appreciated!

 

Thank you

 

 

 

 

 

 

Here is the log:

 

W 19:51:01 User accepted disc space warning and is attempting to overburn!

I 19:51:01 Operation Started!

I 19:51:01 Source File: C:\New Folder\DC5_Disc1.mds

I 19:51:01 Source File Sectors: 3,586,336 (MODE1/2048)

I 19:51:01 Source File Size: 7,344,816,128 bytes

I 19:51:01 Source File Volume Identifier: DEADLIESTCATCH_S5_D1

I 19:51:01 Source File Volume Set Identifier: 3D8C92570036B908

I 19:51:01 Source File Application Identifier: IMGBURN V2.5.4.0 - THE ULTIMATE IMAGE BURNER!

I 19:51:01 Source File Implementation Identifier: ImgBurn

I 19:51:01 Source File File System(s): ISO9660, UDF (1.02)

I 19:51:01 Destination Device: [0:0:0] _NEC DVD_RW ND-3520A 1.04 (E:) (ATA)

I 19:51:01 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x)

I 19:51:01 Destination Media Sectors: 2,298,496

I 19:51:01 Write Mode: DVD

I 19:51:01 Write Type: DAO

I 19:51:01 Write Speed: 12x

I 19:51:01 Link Size: Auto

I 19:51:01 Lock Volume: Yes

I 19:51:01 Test Mode: No

I 19:51:01 OPC: No

I 19:51:01 BURN-Proof: Enabled

I 19:51:01 Write Speed Successfully Set! - Effective: 16,620 KB/s (12x)

E 19:51:03 Failed to Reserve Track! - Reason: Invalid Field in CDB

E 19:51:04 Operation Failed! - Duration: 00:00:02

I 19:51:04 Average Write Rate: N/A - Maximum Write Rate: N/A

Link to comment
Share on other sites

I 19:51:01 Source File Size: 7,344,816,128 bytes
I 19:51:01 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x)

 

You are trying to burn a ~7GB image onto a single layer DVD that only holds 4.4GB. You need to use a DL DVD, it would be preferable to user DVD+R DL Verbatim discs.

Edited by Rincewind
Link to comment
Share on other sites

I 19:51:01 Source File Size: 7,344,816,128 bytes
I 19:51:01 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x)

 

You are trying to burn a ~7GB image onto a single layer DVD that only holds 4.4GB. You need to use a DL DVD, it would be preferable to user DVD+R DL Verbatim discs.

 

 

I have done this for a few disks in the past and this same series even and did not get that issue with dvd shrink. Are you telling me that I now need more expensive disks to avoid buying a new nero?

Link to comment
Share on other sites

Well clearly DVD shrink did NOT shrink your image, go back and check your settings because imgburn is telling you that your image is over the capacity for a single layer disc.

 

A single layer DVD-R holds 4,707,319,808 bytes

A single layer DVD+R holds 4,700,372,992 bytes

 

Your image is: 7,344,816,128 bytes

 

Therefore you need to check your settings on DVDShrink since obviously it did not shrink to DVD5 (single layer).

 

If you do not wish to use a more expensive disc (in this case double layer (DL)), then redo the entire DVDShrink process.

Link to comment
Share on other sites

Well clearly DVD shrink did NOT shrink your image, go back and check your settings because imgburn is telling you that your image is over the capacity for a single layer disc.

 

A single layer DVD-R holds 4,707,319,808 bytes

A single layer DVD+R holds 4,700,372,992 bytes

 

Your image is: 7,344,816,128 bytes

 

Therefore you need to check your settings on DVDShrink since obviously it did not shrink to DVD5 (single layer).

 

If you do not wish to use a more expensive disc (in this case double layer (DL)), then redo the entire DVDShrink process.

 

Worked! Issue resolved, thank you very much Rincewind!

 

For some reason I had multiple ISO files in the same folder and ImgBurn just did not show me the file sizes, I went out manually and found the shrunk 4GB file and deleted the 7GB file then re-ran ImgBurn.

 

Thank you

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.