Burn Failure

[Jimbo]

I had this burn failure. I noticed AnyDvd open at the begining of the burn and closed it.

 

ImgBurn Version 2.5.2.0 - Log

; Wednesday, 15 December 2010, 15:49:52

; \\****************************************//

;

;

I 14:53:49 ImgBurn Version 2.5.2.0 started!

I 14:53:49 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)

I 14:53:49 Total Physical Memory: 8,125,680 KB - Available: 6,554,012 KB

W 14:53:49 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 14:53:49 Initialising SPTI...

I 14:53:49 Searching for SCSI / ATAPI devices...

I 14:53:49 -> Drive 1 - Info: ATAPI iHAS424 A ZLC1 (E:) (ATA)

I 14:53:49 -> Drive 2 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (F:) (ATA)

I 14:53:49 -> Drive 3 - Info: Optiarc DVD RW AD-7241S 1.03 (G:) (USB)

I 14:53:49 Found 2 DVD±RW/RAMs and 1 BD-RE!

I 14:54:35 Operation Started!

I 14:54:35 Source File: C:\Bray2\82588792_ENTRAPMENT.MDS

I 14:54:35 Source File Sectors: 4,000,960 (MODE1/2048)

I 14:54:35 Source File Size: 8,193,966,080 bytes

I 14:54:35 Source File Volume Identifier: 82588792_ENTRAPMENT

I 14:54:35 Source File Volume Set Identifier: 3D8F5C0E003D0C68

I 14:54:35 Source File Application Identifier: ImgBurn v2.5.2.0

I 14:54:35 Source File Implementation Identifier: ImgBurn

I 14:54:35 Source File File System(s): UDF (2.50)

I 14:54:35 Destination Device: [0:0:0] Optiarc DVD RW AD-7241S 1.03 (G:) (USB)

I 14:54:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 14:54:35 Destination Media Sectors: 4,173,824

I 14:54:35 Write Mode: DVD

I 14:54:35 Write Type: DAO

I 14:54:35 Write Speed: 2.4x

I 14:54:35 Link Size: Auto

I 14:54:35 Lock Volume: Yes

I 14:54:35 Test Mode: No

I 14:54:35 OPC: No

I 14:54:35 BURN-Proof: Enabled

I 14:54:35 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 14:54:35 Book Type Setting: DVD-ROM

I 14:54:35 Optimal L0 Data Zone Capacity: 2,000,480

I 14:54:35 Optimal L0 Data Zone Method: ECC Block Boundary

I 14:54:42 Set L0 Data Zone Capacity Succeeded!

I 14:54:42 Filling Buffer... (40 MB)

I 14:54:42 Writing LeadIn...

I 14:54:48 Writing Session 1 of 1... (1 Track, LBA: 0 - 4000959)

I 14:54:48 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4000959)

I 14:54:48 Writing Layer 0... (LBA: 0 - 2000479)

I 15:15:36 Writing Layer 1... (LBA: 2000480 - 4000959)

I 15:36:33 Synchronising Cache...

I 15:36:34 Closing Track...

I 15:36:48 Finalising Disc...

W 15:38:20 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - No Seek Complete

W 15:38:21 Finalise Disc Failed! - Reason: No Seek Complete

W 15:38:21 Retrying (1 of 3)...

I 15:40:29 Exporting Graph Data...

I 15:40:29 Graph Data File: C:\Users\durkinjt\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7241S_1.03_WEDNESDAY-DECEMBER-15-2010_2-54_PM_MKM-001-00_2.4x.ibg

I 15:40:29 Export Successfully Completed!

I 15:40:29 Operation Successfully Completed! - Duration: 00:45:53

I 15:40:29 Average Write Rate: 3,194 KB/s (2.3x) - Maximum Write Rate: 3,849 KB/s (2.8x)

I 15:40:29 Cycling Tray before Verify...

W 15:40:36 Waiting for device to become ready...

I 15:40:48 Device Ready!

I 15:40:50 Operation Started!

I 15:40:50 Source Device: [0:0:0] Optiarc DVD RW AD-7241S 1.03 (G:) (USB)

I 15:40:50 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 15:40:50 Image File: C:\Bray2\82588792_ENTRAPMENT.MDS

I 15:40:50 Image File Sectors: 4,000,960 (MODE1/2048)

I 15:40:50 Image File Size: 8,193,966,080 bytes

I 15:40:50 Image File Volume Identifier: 82588792_ENTRAPMENT

I 15:40:50 Image File Volume Set Identifier: 3D8F5C0E003D0C68

I 15:40:50 Image File Application Identifier: ImgBurn v2.5.2.0

I 15:40:50 Image File Implementation Identifier: ImgBurn

I 15:40:50 Image File File System(s): UDF (2.50)

I 15:40:50 Read Speed (Data/Audio): MAX / MAX

I 15:40:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4000959)

I 15:40:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4000959)

I 15:40:50 Verifying Layer 0... (LBA: 0 - 2000479)

W 15:45:59 Failed to Read Sector 1444848 - Reason: Unrecovered Read Error

W 15:45:59 Sector 1444848 maps to File: \BDMV\STREAM\00000.m2ts

W 15:46:06 Retrying (1)...

W 15:46:09 Retry Failed - Reason: Unrecovered Read Error

W 15:46:09 Retrying (2)...

W 15:46:12 Retry Failed - Reason: Unrecovered Read Error

W 15:46:12 Retrying (3)...

W 15:46:15 Retry Failed - Reason: Unrecovered Read Error

W 15:46:15 Retrying (4)...

W 15:46:18 Retry Failed - Reason: Unrecovered Read Error

W 15:46:18 Retrying (5)...

W 15:46:21 Retry Failed - Reason: Unrecovered Read Error

W 15:46:21 Retrying (6)...

W 15:46:23 Retry Failed - Reason: Unrecovered Read Error

W 15:46:25 Retrying (7)...

W 15:46:28 Retry Failed - Reason: Unrecovered Read Error

W 15:46:28 Retrying (8)...

W 15:46:31 Retry Failed - Reason: Unrecovered Read Error

W 15:46:35 Failed to Read Sector 1444848 - Reason: Unrecovered Read Error

W 15:46:35 Sector 1444848 maps to File: \BDMV\STREAM\00000.m2ts

W 15:46:47 Failed to Read Sector 1446960 - Reason: Unrecovered Read Error

W 15:46:47 Sector 1446960 maps to File: \BDMV\STREAM\00000.m2ts

W 15:46:50 Failed to Read Sector 1446960 - Reason: Unrecovered Read Error

W 15:46:50 Sector 1446960 maps to File: \BDMV\STREAM\00000.m2ts

W 15:46:52 Failed to Read Sector 1446961 - Reason: Unrecovered Read Error

W 15:46:52 Sector 1446961 maps to File: \BDMV\STREAM\00000.m2ts

W 15:46:55 Retrying (1)...

W 15:46:58 Retry Failed - Reason: Unrecovered Read Error

W 15:47:00 Retrying (2)...

W 15:47:02 Retry Failed - Reason: Unrecovered Read Error

W 15:47:03 Retrying (3)...

W 15:47:06 Retry Failed - Reason: Unrecovered Read Error

W 15:47:06 Retrying (4)...

W 15:47:09 Retry Failed - Reason: Unrecovered Read Error

W 15:47:10 Retrying (5)...

W 15:47:12 Retry Failed - Reason: Unrecovered Read Error

W 15:47:13 Failed to Read Sector 1446961 - Reason: Unrecovered Read Error

W 15:47:13 Sector 1446961 maps to File: \BDMV\STREAM\00000.m2ts

W 15:47:16 Failed to Read Sector 1446962 - Reason: Unrecovered Read Error

W 15:47:16 Sector 1446962 maps to File: \BDMV\STREAM\00000.m2ts

W 15:47:20 Retrying (1)...

W 15:47:22 Retry Failed - Reason: Unrecovered Read Error

W 15:47:29 Retrying (2)...

W 15:47:32 Retry Failed - Reason: Unrecovered Read Error

W 15:47:39 Retrying (3)...

W 15:47:41 Retry Failed - Reason: Unrecovered Read Error

W 15:47:42 Retrying (4)...

W 15:47:44 Retry Failed - Reason: Unrecovered Read Error

W 15:48:01 Retrying (5)...

W 15:48:03 Retry Failed - Reason: Unrecovered Read Error

W 15:48:04 Retrying (6)...

W 15:48:06 Retry Failed - Reason: Unrecovered Read Error

E 15:48:08 Failed to Read Sector 1446962 - Reason: Unrecovered Read Error

E 15:48:08 Sector 1446962 maps to File: \BDMV\STREAM\00000.m2ts

E 15:48:08 Failed to Verify Sectors!

I 15:48:08 Exporting Graph Data...

I 15:48:08 Graph Data File: C:\Users\durkinjt\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7241S_1.03_WEDNESDAY-DECEMBER-15-2010_2-54_PM_MKM-001-00_2.4x.ibg

I 15:48:08 Export Successfully Completed!

E 15:48:08 Operation Failed! - Duration: 00:07:18

I 15:48:08 Average Verify Rate: 6,607 KB/s (4.8x) - Maximum Verify Rate: 13,819 KB/s (10.0x)

I 15:49:52 Close Request Acknowledged

I 15:49:52 Closing Down...

I 15:49:52 Shutting down SPTI...

I 15:49:52 ImgBurn closed!

;

;

; //****************************************\\

; ImgBurn Version 2.5.2.0 - Log

; Wednesday, 15 December 2010, 14:53:07

; \\****************************************//

;

[Rincewind]

First update imgburn to 2.5.4 and also try burning at 4x instead of 2.4x.

[ianymaty]

I 14:53:49 -> Drive 1 - Info: ATAPI iHAS424 A ZLC1 (E:) (ATA)

I 14:53:49 -> Drive 2 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (F:) (ATA)

I 14:53:49 -> Drive 3 - Info: Optiarc DVD RW AD-7241S 1.03 (G:) (USB)

I 14:53:49 Found 2 DVD±RW/RAMs and 1 BD-RE!

What is the reason to use an external drive when you have two internal capable to do the thing?

[Jimbo]

First update imgburn to 2.5.4 and also try burning at 4x instead of 2.4x.

Thanks for the reply. I have been using Img for years before this update, often with this media @2.4 don't really think this is the solution.

[LIGHTNING UK!]

There is a no hard and fast solution to this issue of yours.

 

Your drive/firmware/media combo should just work... but obviously it's not, so now you need to try something else.

 

If you only had 1 failure, just forget about it and move onto the next disc - it could have just been a duff one.

 

If all your discs start failing, either the spindle is faulty or your drive is dirty/faulty.

 

Changing the write speed can sometimes help. There's nothing to say that 2.4x produces the best quality burns for your drive/firmware/media combo - and that's what you're aiming for at the end of the day, the best quality burn possible.

 

Try cleaning the drive with a cleaning disc.

 

Try another spindle of discs. (stick with the decent MKM-001-00 / MKM-003-00 dyes)

[Jimbo]

There is a no hard and fast solution to this issue of yours.

 

Your drive/firmware/media combo should just work... but obviously it's not, so now you need to try something else.

 

If you only had 1 failure, just forget about it and move onto the next disc - it could have just been a duff one.

 

If all your discs start failing, either the spindle is faulty or your drive is dirty/faulty.

 

Changing the write speed can sometimes help. There's nothing to say that 2.4x produces the best quality burns for your drive/firmware/media combo - and that's what you're aiming for at the end of the day, the best quality burn possible.

 

Try cleaning the drive with a cleaning disc.

 

Try another spindle of discs. (stick with the decent MKM-001-00 / MKM-003-00 dyes)

 

]

Thanks, will give it a go.

[Jimbo]

There is a no hard and fast solution to this issue of yours.

 

Your drive/firmware/media combo should just work... but obviously it's not, so now you need to try something else.

 

If you only had 1 failure, just forget about it and move onto the next disc - it could have just been a duff one.

 

If all your discs start failing, either the spindle is faulty or your drive is dirty/faulty.

 

Changing the write speed can sometimes help. There's nothing to say that 2.4x produces the best quality burns for your drive/firmware/media combo - and that's what you're aiming for at the end of the day, the best quality burn possible.

 

Try cleaning the drive with a cleaning disc.

 

Try another spindle of discs. (stick with the decent MKM-001-00 / MKM-003-00 dyes)

 

]

Thanks, will give it a go.

[Jimbo]

There is a no hard and fast solution to this issue of yours.

 

Your drive/firmware/media combo should just work... but obviously it's not, so now you need to try something else.

 

If you only had 1 failure, just forget about it and move onto the next disc - it could have just been a duff one.

 

If all your discs start failing, either the spindle is faulty or your drive is dirty/faulty.

 

Changing the write speed can sometimes help. There's nothing to say that 2.4x produces the best quality burns for your drive/firmware/media combo - and that's what you're aiming for at the end of the day, the best quality burn possible.

 

Try cleaning the drive with a cleaning disc.

 

Try another spindle of discs. (stick with the decent MKM-001-00 / MKM-003-00 dyes)

 

]

Thanks, will give it a go.