Enoch Root Posted January 5, 2011 Share Posted January 5, 2011 So, I've also got a problem with an I/O Error. Since I guess it's a different problem than the other one, I created a new topic. If I shouldn't have, please join this topic with the other thread. ----------- I've been using ImgBurn since yesterday and have successfully burned the first 4 DVDs with a file structure on them. But right now, whatever I do, I always get an I/O Error message and can't find a workaround. DVD-Burner used: HL-DT-ST DVDRAM GSA-U20N HX12 (ATAPI) Firmware is up to date. (HX12) Media Type used: MBIPG101-R05-01 (They are called 'Platinum' here in Germany, but they are marketed around the world under various names afaik.) Don't know if this is important, but here is the information that is displayed under Device Current Profile: DVD+R Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 2.295.104 Free Space: 4.700.372.992 bytes Free Time: 510:03:29 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 4x; 8x Physical Format Information (Last Recorded): Disc ID: MBIPG101-R05-01 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.491.711 Last Physical Sector in Layer 0: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2295103 (0x0023053F) -> RS: 4.584 KB/s (3,3x) - WS: 5.540 KB/s (4x) Descriptor 2... -> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2295103 (0x0023053F) -> RS: 4.584 KB/s (3,3x) - WS: 11.080 KB/s (8x) Now, when I try burning a File (or folder structure) to the DVD, I get the following result: Writing Speed 8x (have also tried 4x with no different result) Pressing Calculate Image Size I 22:21:01 Operation Started!I 22:21:01 Building Image Tree... I 22:21:01 Checking Directory Depth... I 22:21:01 Calculating Totals... I 22:21:01 Preparing Image... I 22:21:01 Checking Path Length... I 22:21:01 Contents: 1 File, 0 Folders I 22:21:01 Content Type: DivX Video I 22:21:01 Data Type: MODE1/2048 I 22:21:01 File System(s): ISO9660, Joliet I 22:21:01 Volume Label: [Not Configured] I 22:21:01 Size: 733.581.312 bytes I 22:21:01 Sectors: 358.194 I 22:21:01 Image Size: 733.642.752 bytes I 22:21:01 Image Sectors: 358.224 I 22:21:01 Operation Successfully Completed! - Duration: 00:00:00 Build OK I 22:22:12 Operation Started!I 22:22:12 Building Image Tree... I 22:22:27 Checking Directory Depth... I 22:22:27 Calculating Totals... I 22:22:27 Preparing Image... I 22:22:27 Checking Path Length... I 22:22:27 Contents: 1 File, 0 Folders I 22:22:27 Content Type: DivX Video I 22:22:28 Data Type: MODE1/2048 I 22:22:28 File System(s): ISO9660, Joliet I 22:22:28 Volume Label: test I 22:22:28 Size: 733.581.312 bytes I 22:22:28 Sectors: 358.194 I 22:22:28 Image Size: 733.642.752 bytes I 22:22:28 Image Sectors: 358.224 I 22:24:09 Operation Successfully Completed! - Duration: 00:01:57 I 22:24:09 Operation Started! I 22:24:09 Source File: -==/\/[bUILD IMAGE]\/\==- I 22:24:09 Source File Sectors: 358.224 (MODE1/2048) I 22:24:09 Source File Size: 733.642.752 bytes I 22:24:09 Source File Volume Identifier: test I 22:24:10 Source File Volume Set Identifier: UNDEFINED I 22:24:10 Source File Application Identifier: ImgBurn v2.5.4.0 - The Ultimate Image Burner! I 22:24:10 Source File Implementation Identifier: ImgBurn v2.5.4.0 I 22:24:10 Source File File System(s): ISO9660; Joliet I 22:24:10 Destination Device: [0:1:0] HL-DT-ST DVDRAM GSA-U20N HX12 (D:) (ATAPI) I 22:24:10 Destination Media Type: DVD+R (Disc ID: MBIPG101-R05-01) (Speeds: 4x; 8x) I 22:24:10 Destination Media Sectors: 2.295.104 I 22:24:10 Write Mode: DVD I 22:24:10 Write Type: DAO I 22:24:10 Write Speed: 8x I 22:24:10 DVD+R Reserve Track: No I 22:24:10 Link Size: Auto I 22:24:10 Lock Volume: Yes I 22:24:10 Test Mode: No I 22:24:10 OPC: No I 22:24:10 BURN-Proof: Enabled I 22:24:10 Write Speed Successfully Set! - Effective: 11.092 KB/s (8x) I 22:24:10 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 22:24:10 Filling Buffer... (40 MB) I 22:24:11 Writing LeadIn... W 22:24:28 Failed to Write Sectors 544 - 575 - Reason: Write Error W 22:24:28 Retrying (1 of 20)... W 22:24:28 Retry Failed - Reason: Write Error W 22:24:28 Retrying (2 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (3 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (4 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (5 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (6 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (7 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (8 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (9 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (10 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (11 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (12 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (13 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (14 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (15 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (16 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (17 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (18 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (19 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write W 22:24:28 Retrying (20 of 20)... W 22:24:28 Retry Failed - Reason: Invalid Address For Write Chancel E 22:26:07 Failed to Write Sectors 544 - 575 - Reason: Write ErrorE 22:26:07 Next Writable Address: 0 I 22:26:07 Synchronising Cache... W 22:26:08 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 22:26:08 Synchronise Cache Failed! - Reason: Write Error W 22:26:08 Retrying (1 of 3)... W 22:26:09 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 22:26:09 Retry Failed - Reason: Write Error W 22:26:09 Retrying (2 of 3)... W 22:26:10 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 22:26:10 Retry Failed - Reason: Write Error W 22:26:10 Retrying (3 of 3)... W 22:26:11 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 22:26:11 Retry Failed - Reason: Write Error Chancel E 22:27:32 Synchronise Cache Failed! - Reason: Write ErrorI 22:27:32 Synchronising Cache (Last Attempt!)... E 22:27:32 Synchronise Cache Failed! - Reason: Unknown (ASC: 0xA0, ASCQ: 0x80) No W 22:28:39 User opted to skip the 'Close Track/Session/Disc' functions.E 22:28:39 Failed to Write Image! E 22:28:39 Operation Failed! - Duration: 00:04:29 I 22:28:39 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) --------------------- Well, and that's that. Really confusing for me, because the first 4 DVDs were burned without any Problems and now this. Also I can't remember changing any setting that could have caused those problems. I'd be grateful if anyone here had a solution for me. Already in love with the programm. If you require more information, please ask right away. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 5, 2011 Share Posted January 5, 2011 You already have the latest firmware on the drive so all you can do is try cleaning it with a cleaning disc, try the 4x write speed and buy some different (better) discs - Verbatim or Taiyo Yuden (well, something not using the 'MBIPG101-R05-01' dye!) Link to comment Share on other sites More sharing options...
Enoch Root Posted January 5, 2011 Author Share Posted January 5, 2011 (edited) You already have the latest firmware on the drive so all you can do is try cleaning it with a cleaning disc, try the 4x write speed and buy some different (better) discs - Verbatim or Taiyo Yuden (well, something not using the 'MBIPG101-R05-01' dye!) So you presume it's a hardware problem? Either the writer itself or the media?! Edit: Must be a hardware problem. I've just successfully burned a dvd and another one is burning right now. Media is still MBIPG101-R05-01. I guess this thread can be closed then. Not a Software Problem - I'll have to find out what's wrong with the burner. Thx for this nice programm btw! Edited January 5, 2011 by Enoch Root Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 5, 2011 Share Posted January 5, 2011 The drive has complete control over the burn and whether it succeeds or fails, all the software does is send it data. These issues are always a problem between the drive/firmware/media (and to a degree, the write speed selected - some will be successful when others aren't) combo you're using. Like I said, try cleaning the drive with a cleaning disc. If your drive is in tip-top condition and you use decent media, you shouldn't have any problems. Link to comment Share on other sites More sharing options...
Recommended Posts