ken7795 Posted January 10, 2011 Share Posted January 10, 2011 I am having a problem with some of the Blu-rays (BD-R - Verbatim/25GB) that I have burned. The video is absolutely perfect, but the audio will sporadically drop for a second and then return. Other than the audio drops, the BD-Rs are perfect. However, it's rather difficult to enjoy a movie when you constantly have the audio dropping out (i.e. I made a copy of The Princess and the Frog for my daughter and the audio would drop sporadically during the various musical numbers). For what it's worth, I used AnyDVDHD to rip the movie, BD Rebuilder to compress it to fit onto a BD-R and then IMGBurn. Additionally, I tested the compressed version using TotalMedia Theatre in my attempts to blame BD Rebuilder and I did not have the audio drops when playing the same scenes. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 10, 2011 Share Posted January 10, 2011 What are you playing the BD-R in / on? Your PC or a standalone player? Maybe it just can't read the disc very well. If the disc burnt and verified ok, there's little more we can do. Link to comment Share on other sites More sharing options...
ken7795 Posted January 11, 2011 Author Share Posted January 11, 2011 What are you playing the BD-R in / on? Your PC or a standalone player? Maybe it just can't read the disc very well. If the disc burnt and verified ok, there's little more we can do. I'm playing the BD-R (Verbatim) on a standalone player (JVC BD-C6500). To be frank, I didn't verify the disc after burning. Upon reading posts in this forum and other sources, it's my understanding that it will simply confirm that the disc burned. Does the verification process actually "help" burning a Blu-ray disc? Link to comment Share on other sites More sharing options...
ianymaty Posted January 11, 2011 Share Posted January 11, 2011 it's my understanding that it will simply confirm that the disc burned. Does the verification process actually "help" burning a Blu-ray disc? It will not help but it will confirm that the disc is readable, at least in the drive that burned it. If you have that confirmation, than you need to look elsewhere. i.e. Playability of the source file/s or player reading compatibility with that media. Link to comment Share on other sites More sharing options...
ken7795 Posted January 11, 2011 Author Share Posted January 11, 2011 it's my understanding that it will simply confirm that the disc burned. Does the verification process actually "help" burning a Blu-ray disc? It will not help but it will confirm that the disc is readable, at least in the drive that burned it. If you have that confirmation, than you need to look elsewhere. i.e. Playability of the source file/s or player reading compatibility with that media. First of all, I need to correct my earlier message about my Blu-ray player - it's a Samsung BD-C6500. Also, the audio is not cutting out in the same section on the original Blu-ray disc. Link to comment Share on other sites More sharing options...
ianymaty Posted January 11, 2011 Share Posted January 11, 2011 Does the source file play nice from the hard disk with a software player? As I see on Support site there is an Upgrade file for the player posted on 27 Dec. 2010 that states: - Improve specific disc''s playback capability You should install it http://www.samsung.com/us/support/owners/product/BD-C6500 Link to comment Share on other sites More sharing options...
Recommended Posts