Erick_ImgBurn Posted January 21, 2011 Posted January 21, 2011 (edited) Updated to current version; same issues. I 19:51:11 Verifying Session 1 of 1... (1 Track, LBA: 0 - 289137) I 19:51:11 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 289137) W 19:54:08 Failed to Read Sector 171360 - Reason: Illegal Mode For This Track W 19:54:08 Sector 171360 maps to File: \I386\SP3.CAB Is this error because the ISO of Windows XP is copyrighted, or is this a bad burn? I 18:58:42 Verifying Session 1 of 1... (1 Track, LBA: 0 - 289137) I 18:58:42 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 289137) W 19:01:21 Failed to Read Sector 230470 - Reason: Unrecovered Read Error W 19:01:21 Sector 230470 maps to File: \I386\LANG\IMJPST.DI_ Is this a bad burn, or am I doing something wrong, such as not configuring the software properly? Edited January 21, 2011 by Erick_ImgBurn
Erick_ImgBurn Posted January 21, 2011 Author Posted January 21, 2011 (edited) Is the CD-RW scratched/heavily used before? No, new and scratch-free The image is Windows XP Home with SP3 Retail. Is the disc data copyrighted and that's causing the verify issue, or is it a bad burn? Just throwing that out there. Edited January 21, 2011 by Erick_ImgBurn
ianymaty Posted January 21, 2011 Posted January 21, 2011 I'll say it was a bad burn. Your drive is old and the media is newer and not very well supported. Try with a regular CD not RW. Your ImgBurn is out of date btw.
kenbra Posted January 21, 2011 Posted January 21, 2011 I used a laser-lens cleaner, and this time the write process completed and didn't error out at 30% Complete. However, now I have another issue: while verifying the disc, ImgBurn reported a few unrecoverable read errors for sectors, at which point I canceled the process. I then transferred the disc to the CD-ROM drive, verified the disc again, and got the same error. The Windows XP setup dialog popped up after inserting the disc, though. Am I doing something wrong, or is it really time for a new burner? Here's that log: ; //****************************************\\ ; ImgBurn Version 2.5.4.0 - Log ; Thursday, 20 January 2011, 19:56:30 ; \\****************************************// ; ; I 19:49:22 ImgBurn Version 2.5.4.0 started! I 19:49:22 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 19:49:22 Total Physical Memory: 982,512 KB - Available: 632,164 KB W 19:49:22 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 19:49:22 Initialising SPTI... I 19:49:22 Searching for SCSI / ATAPI devices... I 19:49:22 -> Drive 1 - Info: ASUS CD-S480/AH 0.87 (E:) (ATA) I 19:49:22 -> Drive 2 - Info: HP DVD Writer 300n 3.20 (F:) (ATA) I 19:49:22 Found 1 CD-ROM and 1 DVD+RW! I 19:51:10 Operation Started! I 19:51:10 Source Device: [2:1:0] ASUS CD-S480/AH 0.87 (E:) (ATA) I 19:51:10 Source Media Type: CD-ROM I 19:51:10 Image File: C:\Documents and Settings\Erick Colletti\My Documents\XP Home with SP3\en_windows_xp_home_with_service_pack_3_x86_cd_x14-92413.iso I 19:51:10 Image File Sectors: 289,138 (MODE1/2048) I 19:51:10 Image File Size: 592,154,624 bytes I 19:51:10 Image File Volume Identifier: GRTMHFPP_EN I 19:51:10 Image File Volume Set Identifier: GRTMHFPP_EN I 19:51:10 Image File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 19:51:10 Image File File System(s): ISO9660 (Bootable) I 19:51:10 Read Speed (Data/Audio): MAX / MAX I 19:51:11 Verifying Session 1 of 1... (1 Track, LBA: 0 - 289137) I 19:51:11 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 289137) W 19:54:08 Failed to Read Sector 171360 - Reason: Illegal Mode For This Track W 19:54:08 Sector 171360 maps to File: \I386\SP3.CAB W 19:55:51 Failed to Read Sector 171360 - Reason: Illegal Mode For This Track W 19:55:51 Sector 171360 maps to File: \I386\SP3.CAB W 19:55:58 Failed to Read Sector 171361 - Reason: Illegal Mode For This Track W 19:55:58 Sector 171361 maps to File: \I386\SP3.CAB W 19:56:09 Failed to Read Sector 171361 - Reason: Illegal Mode For This Track W 19:56:09 Sector 171361 maps to File: \I386\SP3.CAB W 19:56:15 Failed to Read Sector 171362 - Reason: Illegal Mode For This Track W 19:56:15 Sector 171362 maps to File: \I386\SP3.CAB E 19:56:24 Failed to Read Sector 171362 - Reason: Illegal Mode For This Track E 19:56:24 Sector 171362 maps to File: \I386\SP3.CAB E 19:56:24 Failed to Verify Sectors! I 19:56:24 Exporting Graph Data... I 19:56:24 Graph Data File: C:\Documents and Settings\Erick Colletti\Application Data\ImgBurn\Graph Data Files\ASUS_CD-S480-AH_0.87_THURSDAY-JANUARY-20-2011_7-51_PM_N-A.ibg I 19:56:24 Export Successfully Completed! E 19:56:24 Operation Failed! - Duration: 00:05:14 I 19:56:24 Average Verify Rate: 1,098 KB/s (7.3x) - Maximum Verify Rate: 2,461 KB/s (16.4x) I 19:56:30 Close Request Acknowledged I 19:56:30 Closing Down... I 19:56:30 Shutting down SPTI... I 19:56:30 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.4.0 - Log ; Thursday, 20 January 2011, 19:47:18 ; \\****************************************// ; ; I 19:46:14 ImgBurn Version 2.5.4.0 started! I 19:46:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 19:46:14 Total Physical Memory: 982,512 KB - Available: 632,764 KB W 19:46:14 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 19:46:14 Initialising SPTI... I 19:46:14 Searching for SCSI / ATAPI devices... I 19:46:14 -> Drive 1 - Info: ASUS CD-S480/AH 0.87 (E:) (ATA) I 19:46:14 -> Drive 2 - Info: HP DVD Writer 300n 3.20 (F:) (ATA) I 19:46:14 Found 1 CD-ROM and 1 DVD+RW! I 19:47:18 Close Request Acknowledged I 19:47:18 Closing Down... I 19:47:18 Shutting down SPTI... I 19:47:18 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.4.0 - Log ; Thursday, 20 January 2011, 19:45:49 ; \\****************************************// ; ; I 18:33:59 ImgBurn Version 2.5.4.0 started! I 18:33:59 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 18:33:59 Total Physical Memory: 982,512 KB - Available: 632,280 KB W 18:33:59 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 18:33:59 Initialising SPTI... I 18:33:59 Searching for SCSI / ATAPI devices... I 18:34:00 -> Drive 1 - Info: ASUS CD-S480/AH 0.87 (E:) (ATA) I 18:34:00 -> Drive 2 - Info: HP DVD Writer 300n 3.20 (F:) (ATA) I 18:34:00 Found 1 CD-ROM and 1 DVD+RW! I 18:40:51 Operation Started! I 18:40:51 Source File: C:\Documents and Settings\Erick Colletti\My Documents\XP Home with SP3\en_windows_xp_home_with_service_pack_3_x86_cd_x14-92413.iso I 18:40:51 Source File Sectors: 289,138 (MODE1/2048) I 18:40:51 Source File Size: 592,154,624 bytes I 18:40:51 Source File Volume Identifier: GRTMHFPP_EN I 18:40:51 Source File Volume Set Identifier: GRTMHFPP_EN I 18:40:51 Source File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 18:40:51 Source File File System(s): ISO9660 (Bootable) I 18:40:51 Destination Device: [2:0:0] HP DVD Writer 300n 3.20 (F:) (ATA) I 18:40:51 Destination Media Type: CD-RW (Disc ID: 97m34s22f, Mitsubishi Chemical Corp.) (Speeds: 4x) I 18:40:51 Destination Media Sectors: 359,847 I 18:40:51 Write Mode: CD I 18:40:51 Write Type: SAO I 18:40:51 Write Speed: 4x I 18:40:51 Lock Volume: Yes I 18:40:51 Test Mode: No I 18:40:51 OPC: No I 18:40:51 BURN-Proof: Enabled I 18:40:51 Write Speed Successfully Set! - Effective: 706 KB/s (4x) I 18:40:52 Filling Buffer... (20 MB) I 18:40:52 Writing LeadIn... I 18:41:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 289137) I 18:41:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 289137) I 18:57:35 Synchronising Cache... I 18:58:15 Exporting Graph Data... I 18:58:15 Graph Data File: C:\Documents and Settings\Erick Colletti\Application Data\ImgBurn\Graph Data Files\HP_DVD_Writer_300n_3.20_THURSDAY-JANUARY-20-2011_6-40_PM_97m34s22f_4x.ibg I 18:58:15 Export Successfully Completed! I 18:58:15 Operation Successfully Completed! - Duration: 00:17:23 I 18:58:15 Average Write Rate: 601 KB/s (4.0x) - Maximum Write Rate: 615 KB/s (4.1x) I 18:58:15 Cycling Tray before Verify... I 18:58:39 Device Ready! I 18:58:42 Operation Started! I 18:58:42 Source Device: [2:0:0] HP DVD Writer 300n 3.20 (F:) (ATA) I 18:58:42 Source Media Type: CD-ROM (Speeds: 4x, 8x, 10x, 16x) I 18:58:42 Image File: C:\Documents and Settings\Erick Colletti\My Documents\XP Home with SP3\en_windows_xp_home_with_service_pack_3_x86_cd_x14-92413.iso I 18:58:42 Image File Sectors: 289,138 (MODE1/2048) I 18:58:42 Image File Size: 592,154,624 bytes I 18:58:42 Image File Volume Identifier: GRTMHFPP_EN I 18:58:42 Image File Volume Set Identifier: GRTMHFPP_EN I 18:58:42 Image File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 18:58:42 Image File File System(s): ISO9660 (Bootable) I 18:58:42 Read Speed (Data/Audio): MAX / MAX I 18:58:42 Verifying Session 1 of 1... (1 Track, LBA: 0 - 289137) I 18:58:42 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 289137) W 19:01:21 Failed to Read Sector 230470 - Reason: Unrecovered Read Error W 19:01:21 Sector 230470 maps to File: \I386\LANG\IMJPST.DI_ W 19:01:54 Retrying (1)... W 19:01:54 Retry Failed - Reason: Unrecovered Read Error W 19:02:16 Failed to Read Sector 230470 - Reason: Unrecovered Read Error W 19:02:16 Sector 230470 maps to File: \I386\LANG\IMJPST.DI_ W 19:02:17 Failed to Read Sector 230490 - Reason: Unrecovered Read Error W 19:02:17 Sector 230490 maps to File: \I386\LANG\IMJPST.DI_ W 19:03:42 Failed to Read Sector 230490 - Reason: Unrecovered Read Error W 19:03:42 Sector 230490 maps to File: \I386\LANG\IMJPST.DI_ W 19:03:45 Failed to Read Sector 230697 - Reason: Unrecovered Read Error W 19:03:45 Sector 230697 maps to File: \I386\LANG\IMJPST.DI_ W 19:05:03 Failed to Read Sector 230697 - Reason: Unrecovered Read Error W 19:05:03 Sector 230697 maps to File: \I386\LANG\IMJPST.DI_ W 19:05:04 Failed to Read Sector 230698 - Reason: Unrecovered Read Error W 19:05:04 Sector 230698 maps to File: \I386\LANG\IMJPST.DI_ E 19:05:17 Failed to Read Sector 230698 - Reason: Unrecovered Read Error E 19:05:17 Sector 230698 maps to File: \I386\LANG\IMJPST.DI_ E 19:05:17 Failed to Verify Sectors! I 19:05:17 Exporting Graph Data... I 19:05:17 Graph Data File: C:\Documents and Settings\Erick Colletti\Application Data\ImgBurn\Graph Data Files\HP_DVD_Writer_300n_3.20_THURSDAY-JANUARY-20-2011_6-40_PM_97m34s22f_4x.ibg I 19:05:17 Export Successfully Completed! E 19:05:17 Operation Failed! - Duration: 00:06:35 I 19:05:17 Average Verify Rate: 1,168 KB/s (7.8x) - Maximum Verify Rate: 5,023 KB/s (33.5x) I 19:45:48 Close Request Acknowledged I 19:45:48 Closing Down... I 19:45:49 Shutting down SPTI... I 19:45:49 ImgBurn closed! ; update imageburn also
Erick_ImgBurn Posted January 21, 2011 Author Posted January 21, 2011 I'll say it was a bad burn. Your drive is old and the media is newer and not very well supported. Try with a regular CD not RW. Your ImgBurn is out of date btw. Yes, I knew all that. My version of ImgBurn is not the issue.
kevdriver Posted January 21, 2011 Posted January 21, 2011 Erick, You might want to try buying a couple of newer drives and perhaps getting some better quality media. Also its always the best to be running the latest release of imgburn for the best possible results.
Erick_ImgBurn Posted January 21, 2011 Author Posted January 21, 2011 Erick, You might want to try buying a couple of newer drives and perhaps getting some better quality media. Also its always the best to be running the latest release of imgburn for the best possible results. A couple new drives? I don't want "a" new drive. I already use first-class Verbatim media and have tried different speeds and formats. My money's on the drive, but I need to be sure before I invest in a new drive. I'm only a version or two behind. Again, that's not the issue.
spinningwheel Posted January 21, 2011 Posted January 21, 2011 Erick, we do not support older versions. Update and post a log if it fails. spinner
Erick_ImgBurn Posted January 21, 2011 Author Posted January 21, 2011 Updated to current version; same issues. I 19:51:11 Verifying Session 1 of 1... (1 Track, LBA: 0 - 289137) I 19:51:11 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 289137) W 19:54:08 Failed to Read Sector 171360 - Reason: Illegal Mode For This Track W 19:54:08 Sector 171360 maps to File: \I386\SP3.CAB Is this error because the ISO of Windows XP is copyrighted, or is this a bad burn? I 18:58:42 Verifying Session 1 of 1... (1 Track, LBA: 0 - 289137) I 18:58:42 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 289137) W 19:01:21 Failed to Read Sector 230470 - Reason: Unrecovered Read Error W 19:01:21 Sector 230470 maps to File: \I386\LANG\IMJPST.DI_ Is this a bad burn, or am I doing something wrong, such as not configuring the software properly?
Cynthia Posted January 21, 2011 Posted January 21, 2011 Looks more as the burner doesn't like the media used. A cleaning disc might help the SlimLine burner if there should be any dirt on the lens. Try with another brand of disc or a CDR. Replace the burner.
Erick_ImgBurn Posted January 21, 2011 Author Posted January 21, 2011 Good news. I just successfully burned, verified and tested a BartPE disc. That means this disc is good and the burner is okay, right? Still waiting for an answer about the verify errors with the Windows XP SP3 ISO.
LIGHTNING UK! Posted January 21, 2011 Posted January 21, 2011 It doesn't matter what you're burning, errors are errors. The drive has problems producing decent burns on those discs. You can change the discs and hope the drive does a better job on the new ones or you can change the drive and hope it does a better job on the current ones.
Erick_ImgBurn Posted January 22, 2011 Author Posted January 22, 2011 It doesn't matter what you're burning, errors are errors. The drive has problems producing decent burns on those discs. You can change the discs and hope the drive does a better job on the new ones or you can change the drive and hope it does a better job on the current ones. BLUK, I knew all that. I would just like to know if these errors are caused by a copyright protection on Windows XP? BartPE burned fine, so I hope that elimates the drive as the problem.
LIGHTNING UK! Posted January 22, 2011 Posted January 22, 2011 No, it's not copy protection and so no, it doesn't eliminate the drive as the problem.
Erick_ImgBurn Posted January 22, 2011 Author Posted January 22, 2011 That's it! I've had it with this piece of ish! I smashed it good with a hammer. Never have I had a computer device so terrible as this HP (NEC) DVD and CD-RW burner. I might have used it ten times in 7 years, and I've had nothing but problems with it from the first time I used it. I'm buying that Lite-On IHAP right now...
ianymaty Posted January 22, 2011 Posted January 22, 2011 I'm sure you will have less problems. Let us know how it work.
Erick_ImgBurn Posted February 10, 2011 Author Posted February 10, 2011 I'm sure you will have less problems. Let us know how it work. The Lite-On tops that NEC in every which way. Not a read or write issue yet.
ianymaty Posted February 10, 2011 Posted February 10, 2011 Didn't I told you? Happily use it ever after.
Erick_ImgBurn Posted February 10, 2011 Author Posted February 10, 2011 Didn't I told you? Happily use it ever after. Yep, now to spend the next four years reading the ImgBurn guides. LOL
Recommended Posts