HelotesHick Posted January 31, 2011 Posted January 31, 2011 Yes i used imgburn 3 times everything was OK but then i try to use it again and it wont pick up my disc that i put in. can someone plz help me
Cynthia Posted January 31, 2011 Posted January 31, 2011 What does it say in the status bar in the lower left corner?
HelotesHick Posted January 31, 2011 Author Posted January 31, 2011 Device Not Ready (no Reference position Found)
ianymaty Posted January 31, 2011 Posted January 31, 2011 Try a new disc from the spindle. Can you post a log of a burned disc? Look in the pink box above for instruction how to.
HelotesHick Posted January 31, 2011 Author Posted January 31, 2011 I 13:33:20 ImgBurn Version 2.5.5.0 started! I 13:33:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 13:33:20 Total Physical Memory: 1,308,672 KB - Available: 521,320 KB W 13:33:20 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 13:33:20 Initialising SPTI... I 13:33:20 Searching for SCSI / ATAPI devices... I 13:33:20 -> Drive 1 - Info: ATAPI DVD A LH-1H18A HG44 (E:) (ATA) I 13:33:20 -> Drive 2 - Info: SAMSUNG CD-ROM SC-148C B105 (D:) (ATA) I 13:33:20 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown) I 13:33:20 Found 1 CD-ROM, 1 DVD-ROM and 1 DVD±RW/RAM!
ianymaty Posted January 31, 2011 Posted January 31, 2011 This drive is a clone of Lite-On LH-18A1H. Try updating the last firmware listed for Lite-On and try again http://www.firmwarehq.com/Ativa/LH-1H18A/files.html
HelotesHick Posted February 1, 2011 Author Posted February 1, 2011 no matched drive detected This utility is only for LITE-ON DVDRW LH-18A1H DRIVE DETECTED drives: 1-0-0-0 D:SAMSUNG CD-ROM SC_148C B105 1-0-1-0 E:ATAPI DVD A LH-!H18A HG44 2-0-0-0 G:MagicISOVirtual DVD-ROM 1.0A
ianymaty Posted February 1, 2011 Posted February 1, 2011 Disconnect the Samsung drive and leave the writer as master single on cable. Try flashing the drive again.
LIGHTNING UK! Posted February 1, 2011 Posted February 1, 2011 As the device ID doesn't match, you'd have to flash the bin file using a 3rd party flasher. I'm sure you could find more on the subject over at MyCE (CDFreaks).
Recommended Posts