boco Posted February 5, 2011 Posted February 5, 2011 (edited) Hi ImgBurn people. Long-time user, long-time lurker, only now my first post (ImgBurn is very reliable, so I didn't have to post, yet). But now there's a small problem I wanted to report. I scanned the FAQ and did a search, but couldn't find anything like that. If selecting .ccd in the Read settings, ImageBurn creates a .ccd image layout file and forces the main image extension to be .img, which is correct for a CloneCD compatible image. Now to the problem: A CloneCD image consists of three files - a .ccd file (layout), a .img file (main image) and a .sub file (subchannels). I certainly know that ImageBurn doesn't care about subchannel data, which is fine with me. However, the .sub file itself is mandatory. For example, trying to mount it in DTPro greets me with the following message: (file attached at the end) Would it be possible to write a (dummy) .sub file at image creation? It would only need to contain empty subchannel data, but must be present. Or is there something I'm doing wrong? Here's the log creating the image, for completeness (and not to be beaten, lol): I 16:35:16 ImgBurn Version 2.5.5.0 started! I 16:35:16 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 16:35:16 Total Physical Memory: 3.930.548 KB - Available: 2.393.896 KB W 16:35:16 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:35:16 Initialising SPTI... I 16:35:16 Searching for SCSI / ATAPI devices... I 16:35:16 -> Drive 1 - Info: FARA ATAPI001 YRS5 (B:) (ATA) I 16:35:16 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-T50N RP05 (F:) (ATA) I 16:35:16 -> Drive 3 - Info: AZERTY THASDFABFRT 1.00 (G:) (SCSI) I 16:35:16 -> Drive 4 - Info: QWERTY -DEAD-BEEF- CAFE (H:) (SCSI) I 16:35:16 -> Drive 5 - Info: VSN 9Y78XEV4 3.5Z (I:) (SCSI) I 16:35:16 Found 1 DVD±RW/RAM and 4 BD-ROMs! W 16:35:30 Destination File renamed to: WeakSectors_TEST__CD$.img I 16:35:30 Operation Started! I 16:35:30 Source Device: [5:1:0] QWERTY -DEAD-BEEF- CAFE (H:) (SCSI) I 16:35:30 Source Media Type: CD-ROM I 16:35:30 Source Media Sectors: 238.112 I 16:35:30 Source Media Size: 487.653.376 bytes I 16:35:30 Source Media Volume Identifier: WeakSectors_TEST__CD I 16:35:30 Source Media Volume Set Identifier: 4D3022200000003D I 16:35:30 Source Media Application Identifier: _ I 16:35:30 Source Media Implementation Identifier: mkisofs I 16:35:30 Source Media File System(s): ISO9660; Joliet; UDF (1.02) I 16:35:30 Read Speed (Data/Audio): MAX / 8x I 16:35:30 Hardware Read Error Retries: 1 I 16:35:30 Destination File: Q:\WeakSectors_TEST__CD$.img I 16:35:30 Destination Free Space: 665.704.792.064 Bytes (650.102.336 KB) (634.865 MB) (619 GB) I 16:35:30 Destination File System: NTFS I 16:35:30 File Splitting: 2 GB I 16:35:32 Reading Session 1 of 1... (1 Track, LBA: 0 - 238111) I 16:35:32 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 238111) I 16:36:11 Image MD5: 03d779ab67c45b832744512c8c4af501 I 16:36:11 Exporting Graph Data... I 16:36:11 Graph Data File: C:\Users\Boco\AppData\Roaming\ImgBurn\Graph Data Files\QWERTY_-DEAD-BEEF-_CAFE_2011-02-05_04-35_PM_N-A_WeakSectors_TEST__CD(1).ibg I 16:36:11 Export Successfully Completed! I 16:36:11 Operation Successfully Completed! - Duration: 00:00:41 I 16:36:11 Average Read Rate: 11.615 KB/s (77.4x) - Maximum Read Rate: 13.584 KB/s (90.6x) Edited February 5, 2011 by boco
LIGHTNING UK! Posted February 5, 2011 Posted February 5, 2011 The CCD stuff is really just for use in Virtual CloneDrive (which doesn't need the SUB file). That's the whole (only) reason I implemented it (CCD support) in the first place. Otherwise, just stick to BIN/CUE.
Recommended Posts