LogicDeLuxe Posted February 12, 2011 Posted February 12, 2011 (edited) I formated and burned this DVD+R DL with ImgBurn. No problems. Later on, I needed a further copy and created an image of the flawless DVD on my harddisk. Of course, I did this with ImgBurn as well. When burning this, I notice this message: "L0 Data Zone Capacity Miscompare!" How could that be? Is this a problem? Do I have expect problems when playing this DVD now? Here is the full log: I 12:17:20 ImgBurn Version 2.5.2.0 started! I 12:17:20 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2) I 12:17:20 Total Physical Memory: 3.930.308 KB - Available: 3.054.280 KB W 12:17:20 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! W 12:17:20 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:17:20 Initialising ElbyCDIO... I 12:17:20 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.1.0.2 I 12:17:20 Searching for SCSI / ATAPI devices... I 12:17:20 -> Drive 1 - Info: PLEXTOR DVDR PX-755A 1.07 (Q:) (ATA) I 12:17:20 -> Drive 2 - Info: PHILIPS DVDR1640P P3.7 (R:) (ATA) I 12:17:20 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (W:) (SCSI) I 12:17:20 -> Drive 4 - Info: DAE DAE 1.03 (V:) (SCSI) I 12:17:20 Found 2 DVD±RWs and 2 BD-ROM/HD DVD-ROMs! I 12:17:54 Operation Started! I 12:17:54 Source File: E:\image\Return to OZ PAL.mds I 12:17:54 Source File Sectors: 3.333.696 (MODE1/2048) I 12:17:54 Source File Size: 6.827.409.408 bytes I 12:17:54 Source File Volume Identifier: Return to OZ PAL I 12:17:54 Source File Volume Set Identifier: 3E2C6E1B0032DE33 I 12:17:54 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER! I 12:17:54 Source File Implementation Identifier: ImgBurn I 12:17:54 Source File File System(s): ISO9660; UDF (1.02) I 12:17:54 Destination Device: [3:0:0] PLEXTOR DVDR PX-755A 1.07 (Q:) (ATA) I 12:17:54 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 12:17:54 Destination Media Sectors: 4.173.824 I 12:17:54 Write Mode: DVD I 12:17:54 Write Type: DAO I 12:17:54 Write Speed: 8x I 12:17:54 Link Size: Auto I 12:17:54 Lock Volume: Yes I 12:17:54 Test Mode: No I 12:17:54 OPC: Yes I 12:17:54 BURN-Proof: Enabled I 12:17:54 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x) I 12:17:54 Book Type Setting: DVD-ROM I 12:17:54 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes I 12:18:51 Optimal L0 Data Zone Capacity: 1.868.753 I 12:18:51 Optimal L0 Data Zone Method: Copied From Original Disc W 12:18:51 L0 Data Zone Capacity Miscompare! W 12:18:51 Wanted: 1868753, Got: 1868768 I 12:18:51 Filling Buffer... (40 MB) I 12:18:52 Writing LeadIn... I 12:19:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 3333695) I 12:19:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3333695) I 12:19:07 Writing Layer 0... (LBA: 0 - 1868767) I 12:25:13 Writing Layer 1... (LBA: 1868768 - 3333695) I 12:30:03 Synchronising Cache... I 12:30:08 Closing Track... I 12:30:17 Finalising Disc... I 12:32:46 Exporting Graph Data... I 12:32:46 Graph Data File: F:\image\PLEXTOR_DVDR_PX-755A_1.07_SAMSTAG-12-FEBRUAR-2011_12-17_MKM-003-00_8x.ibg I 12:32:46 Export Successfully Completed! I 12:32:46 Operation Successfully Completed! - Duration: 00:14:38 I 12:32:46 Average Write Rate: 10.179 KB/s (7.3x) - Maximum Write Rate: 11.237 KB/s (8.1x) Edited February 12, 2011 by LogicDeLuxe
LIGHTNING UK! Posted February 12, 2011 Posted February 12, 2011 1.868.753 wouldn't be valid as a layer break position. You drive is therefore rounding up to the next multiple of 16. Put the original disc in the drive, switch to Read mode and copy + paste the disc info text from the box on the right. You should update ImgBurn. Why aren't you using SPTI? That's the I/O interface that gets all the testing.
LogicDeLuxe Posted February 12, 2011 Author Posted February 12, 2011 (edited) 1.868.753 wouldn't be valid as a layer break position. You drive is therefore rounding up to the next multiple of 16.Where does this number come from, then? I assume, ImgBurn only formats and writes valid layer breaks, right? Never had a problem with it before. Put the original disc in the drive, switch to Read mode and copy + paste the disc info text from the box on the right. PHILIPS DVDR1640P P3.7 (ATA) Current Profile: DVD+R DL Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 3.333.696 Size: 6.827.409.408 bytes Time: 740:51:21 (MM:SS:FF) File System Information: Sectors: 3.333.696 Size: 6.827.409.408 bytes Time: 740:51:21 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 3333695) -> LeadOut (LBA: 3333696) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 3333696, LRA: 0) Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.176.799 Last Physical Sector in Layer 0: 2.065.360 Physical Format Information (Last Recorded - L1): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.176.799 Last Physical Sector in Layer 0: 2.065.360 Layer Information: Layer 0 Sectors: 1.868.753 (56,06%) Layer 1 Sectors: 1.464.943 (43,94%) And just in case, 1868752 is what the layer break dialog tells me it is. You should update ImgBurn.Just did. Why aren't you using SPTI? That's the I/O interface that gets all the testing.I didn't know. Never encountered any problems before. I'll try this now. Edit: This is what the layer break dialog looks like during formatting: Edited February 12, 2011 by LogicDeLuxe
LIGHTNING UK! Posted February 12, 2011 Posted February 12, 2011 Layer Information: Layer 0 Sectors: 1.868.753 (56,06%) Layer 1 Sectors: 1.464.943 (43,94%) It looks like your drive is misreporting that info. Does the Plextor say the same thing?
LogicDeLuxe Posted February 12, 2011 Author Posted February 12, 2011 Layer Information: Layer 0 Sectors: 1.868.753 (56,06%) Layer 1 Sectors: 1.464.943 (43,94%) It looks like your drive is misreporting that info. Does the Plextor say the same thing? As a matter of fact, it doesn't:Layer Information: Layer 0 Sectors: 1.868.752 (56,06%) Layer 1 Sectors: 1.464.944 (43,94%) That's odd. I never encountered this problem before. Rebuilding the file system solved this problem. (Reading the DVD from the Plextor would have too, I guess) Thanks for your help.
Recommended Posts