Beth2011 Posted February 14, 2011 Posted February 14, 2011 Hi there. I have used IMGBurn successfully for well over a year now. All of the sudden it just stopped working. I have tried uninstalling it and re-installing it 4 times. I have tried shutting down my computer and re-booting it. I have scanned for viruses- nada. I have no idea what has caused this. When I put a disc in- it "buffers" to 100%, then just stops. I was getting an "Invalid address for write" message, now it's just stuck and has been for 45 minutes. I was trying to burn another DVD to get the full log with the "invalid address" message, but it's just stuck. I have ruled out a drive issue, as I also have DVDshrink and just burned 2 DVDs using DVDshrink to my hard drive and it was fine. I have always sent in donations via paypal- so I can rule out Karma also. LOL I make my living burning DVDs and I ONLY trust IMGburn to burn my DVDs so I am up a creek unless someone can help. here is my log- thanks in advance. I 12:41:52 ImgBurn Version 2.5.5.0 started! I 12:41:52 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 12:41:52 Total Physical Memory: 6,085,752 KB - Available: 4,447,996 KB W 12:41:52 Drive L:\ (FAT32) does not support single files > 4 GB in size. I 12:41:52 Initialising SPTI... I 12:41:52 Searching for SCSI / ATAPI devices... I 12:41:52 -> Drive 1 - Info: HL-DT-ST DVD+-RW GH50N B103 (D:) (ATA) I 12:41:52 Found 1 DVD±RW/RAM! I 12:43:16 Operation Started! I 12:43:16 Source File: I:\Streetwise\Streetwise + Runaways, The.iso I 12:43:16 Source File Sectors: 1,471,744 (MODE1/2048) I 12:43:16 Source File Size: 3,014,131,712 bytes I 12:43:16 Source File Volume Identifier: SONY_DVD_RECORDER_VOLUME I 12:43:16 Source File Volume Set Identifier: 34878241 SONY_DVD_RECORDER_VOLUME_SET I 12:43:16 Source File Implementation Identifier: SONY_DVD_RECORDER I 12:43:16 Source File File System(s): ISO9660, UDF (1.02) I 12:43:16 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GH50N B103 (D:) (ATA) I 12:43:16 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 4x, 8x, 12x, 16x) I 12:43:16 Destination Media Sectors: 2,295,104 I 12:43:16 Write Mode: DVD I 12:43:16 Write Type: DAO I 12:43:16 Write Speed: MAX I 12:43:16 DVD+R Reserve Track: No I 12:43:16 Link Size: Auto I 12:43:16 Lock Volume: Yes I 12:43:16 Test Mode: No I 12:43:16 OPC: No I 12:43:16 BURN-Proof: Enabled I 12:43:16 Write Speed Successfully Set! - Effective: 22,167 KB/s (16x) I 12:43:16 Book Type Setting: DVD-ROM I 12:43:17 Filling Buffer... (40 MB) I 12:43:18 Writing LeadIn... That's all it says- it's just "stuck" doing nothing.
LIGHTNING UK! Posted February 14, 2011 Posted February 14, 2011 Try with the other supported write speeds - i.e. 8x. Try cleaning the drive with a cleaning disc. Try with some better quality media - Verbatim or Taiyo Yuden (Victor JVC) The 'Invalid Address For Write' error normally pops up after something else. It's the first error that's important, not what you get from the 20 or so retries.
Beth2011 Posted February 14, 2011 Author Posted February 14, 2011 Try with the other supported write speeds - i.e. 8x. Try cleaning the drive with a cleaning disc. Try with some better quality media - Verbatim or Taiyo Yuden (Victor JVC) The 'Invalid Address For Write' error normally pops up after something else. It's the first error that's important, not what you get from the 20 or so retries. OK I will try and get back with you. Thank you. It was working fine Saturday- Sunday morning it just stopped.
Beth2011 Posted February 14, 2011 Author Posted February 14, 2011 Try with the other supported write speeds - i.e. 8x. Try cleaning the drive with a cleaning disc. Try with some better quality media - Verbatim or Taiyo Yuden (Victor JVC) The 'Invalid Address For Write' error normally pops up after something else. It's the first error that's important, not what you get from the 20 or so retries. OK I will try and get back with you. Thank you. It was working fine Saturday- Sunday morning it just stopped. OK I tried changing the speed- and still the same thing is happening. I 15:57:57 ImgBurn Version 2.5.5.0 started! I 15:57:57 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 15:57:57 Total Physical Memory: 6,085,752 KB - Available: 4,711,884 KB W 15:57:57 Drive L:\ (FAT32) does not support single files > 4 GB in size. I 15:57:57 Initialising SPTI... I 15:57:57 Searching for SCSI / ATAPI devices... I 15:57:57 -> Drive 1 - Info: HL-DT-ST DVD+-RW GH50N B103 (D:) (ATA) I 15:57:57 Found 1 DVD±RW/RAM! I 15:59:29 Operation Started! I 15:59:29 Source File: I:\Streetwise\Streetwise extra DVD (Lulu Funeral).iso I 15:59:29 Source File Sectors: 116,064 (MODE1/2048) I 15:59:29 Source File Size: 237,699,072 bytes I 15:59:29 Source File Volume Identifier: _ I 15:59:29 Source File Volume Set Identifier: 38BC762CRDUS0004 I 15:59:29 Source File Implementation Identifier: Ulead Systems USA Inc. I 15:59:29 Source File File System(s): ISO9660, UDF (1.02) I 15:59:29 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GH50N B103 (D:) (ATA) I 15:59:29 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 4x, 8x, 12x, 16x) I 15:59:29 Destination Media Sectors: 2,295,104 I 15:59:29 Write Mode: DVD I 15:59:29 Write Type: DAO I 15:59:29 Write Speed: 8x I 15:59:29 DVD+R Reserve Track: No I 15:59:29 Link Size: Auto I 15:59:29 Lock Volume: Yes I 15:59:29 Test Mode: No I 15:59:29 OPC: No I 15:59:29 BURN-Proof: Enabled I 15:59:29 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 15:59:29 Book Type Setting: DVD-ROM I 15:59:29 Filling Buffer... (40 MB) I 15:59:31 Writing LeadIn... W 15:59:50 Potential 'ReadBufferCapacity' Deferred Error - Write Error W 15:59:50 Failed to Write Sectors 32 - 63 - Reason: Invalid Address For Write W 15:59:50 Retrying (1 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (2 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (3 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (4 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (5 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (6 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (7 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (8 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (9 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (10 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (11 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (12 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (13 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (14 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (15 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (16 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (17 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (18 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (19 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write W 15:59:50 Retrying (20 of 20)... W 15:59:50 Retry Failed - Reason: Invalid Address For Write E 15:59:54 Failed to Write Sectors 32 - 63 - Reason: Invalid Address For Write E 15:59:54 Next Writable Address: 0 I 15:59:54 Synchronising Cache... W 16:00:02 User opted to skip the 'Close Track/Session/Disc' functions. E 16:00:02 Failed to Write Image! E 16:00:02 Operation Failed! - Duration: 00:00:33 I 16:00:02 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I am sure it's not the drive- I just bought this computer 1 month ago. I am able to write discs using DVDshrink- I just have no way to write to a blank disc. Is there anything else I can try? Thanks in advance. =)
Beth2011 Posted February 14, 2011 Author Posted February 14, 2011 If anybody can help me get IMG back up and running- I will Paypal you $20. I am really in a bind. All my masters are on my external HD- I need someway to burn these to DVD.
LIGHTNING UK! Posted February 14, 2011 Posted February 14, 2011 DVD Shrink can't actually burn. It hooks into Nero, DVD Decrypter or ImgBurn and they do the heavy lifting. This is a drive/firmware/media combo issue, plain and simple. Nothing else comes into it. Switching the 'Write Type' in ImgBurn's settings to 'Incremental' might work around the problem but it's not a real fix. A real fix would be to buy decent discs that the drive can burn properly.
Beth2011 Posted February 14, 2011 Author Posted February 14, 2011 DVD Shrink can't actually burn. It hooks into Nero, DVD Decrypter or ImgBurn and they do the heavy lifting. This is a drive/firmware/media combo issue, plain and simple. Nothing else comes into it. Switching the 'Write Type' in ImgBurn's settings to 'Incremental' might work around the problem but it's not a real fix. A real fix would be to buy decent discs that the drive can burn properly. I tried different discs- same thing. I even have a "stand alone" burner- that is burning both types of DVDs just fine. I am using that today since I cant use IMG- but all my masters are on external HD - I use IMG to get them from my HD to a disc. I just tried going to my back office computer- it's a completely different computer that has IMG burn on it also- BUT the version of IMG Burn on my back computer was downloaded at a completely different time and date as the one on this computer. It worked fine last weekend when I burned some DVDs on it. Now I just went back, booted up that computer to use that to use IMGburn- and I had the *same exact problem.* - IMG did the same exact thing it did on this computer- I put the disc in- it "buffers", runs for about 10 seconds then stops. Any thing else I can do? I am desperate at this point.
Beth2011 Posted February 14, 2011 Author Posted February 14, 2011 I am sorry- can someone help me with the "firmwear" issue? I have tried everything else- Im not 100% sure what firmwear is, but I see from other threads here that downloading it has helped. Can anyone tell me where a safe download of this is? I am so sorry I am being such a pain- I love IMG Burn and use it burn 20+ discs daily, so I am desperate.
LIGHTNING UK! Posted February 14, 2011 Posted February 14, 2011 You already have the latest firmware for your drive. Go and buy some Verbatim / Taiyo Yuden discs as mentioned in post 2. If you still have problems with those, post a new log.
Recommended Posts