RoFz Posted February 18, 2011 Posted February 18, 2011 (edited) Hello all I just would like to receive some explanation on what the error "Invalid Field in CDB" really means. I have no problems burning ISO files, except when using crappy Dual Layer media (but this is not the case right now, since i'm using Verbatim - see log below). Also, additionally to providing some helpful information on what the error means, could it be a problem with my DVD recorder? I 11:22:28 ImgBurn Version 2.5.5.0 started! I 11:22:28 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 11:22:28 Total Physical Memory: 4.184.032 KB - Available: 2.435.856 KB W 11:22:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 11:22:28 Initialising SPTI... I 11:22:28 Searching for SCSI / ATAPI devices... I 11:22:31 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-L632H DW30 (D:) (ATA) I 11:22:31 -> Drive 2 - Info: BIRE FK96R8LEJ 1.03 (E:) (SCSI) I 11:22:31 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 11:23:31 Operation Started! I 11:23:31 Source File: cpx-ds2a.dvd I 11:23:31 Source File Sectors: 3.827.488 (MODE1/2048) I 11:23:31 Source File Size: 7.838.695.424 bytes I 11:23:31 Source File Volume Identifier: DVD_ROM I 11:23:31 Source File Volume Set Identifier: ec67c000MS UDFBridge I 11:23:31 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:23:31 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:23:31 Source File File System(s): ISO9660; UDF (1.50) I 11:23:31 Destination Device: [0:0:0] TSSTcorp DVD+-RW TS-L632H DW30 (D:) (ATA) I 11:23:31 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x) I 11:23:31 Destination Media Sectors: 4.173.824 I 11:23:31 Write Mode: DVD I 11:23:31 Write Type: DAO I 11:23:31 Write Speed: 2x I 11:23:31 Link Size: Auto I 11:23:31 Lock Volume: Yes I 11:23:31 Test Mode: No I 11:23:31 OPC: No I 11:23:31 BURN-Proof: Enabled I 11:23:34 Write Speed Successfully Set! - Effective: 2.770 KB/s (2x) ------> I 11:23:34 Book Type Setting: N/A (Reason: Invalid Field in CDB) I 11:23:34 User Specified L0 Data Zone Capacity: 1.913.760 I 11:24:09 Set L0 Data Zone Capacity Succeeded! I 11:24:09 Filling Buffer... (40 MB) I 11:24:11 Writing LeadIn... I 11:24:13 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 11:24:13 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 11:24:13 Writing Layer 0... (LBA: 0 - 1913759) I 11:43:58 Writing Layer 1... (LBA: 1913760 - 3827487) I 12:04:08 Synchronising Cache... I 12:04:13 Closing Track... I 12:04:15 Finalising Disc... Any help will be greatly appreciated. Edited February 18, 2011 by RoFz
LIGHTNING UK! Posted February 18, 2011 Posted February 18, 2011 CDB is Command Descriptor Block. Unless you're a programmer dealing with low level I/O stuff, that probably won't mean anything to you. (The error is for my benefit) The 'Invalid field in' bit means exactly what it says, there's something wrong/unsupported/invalid about a field (value in a field) within said CDB. Where you're concerned, it probably just means your drive doesn't support the book type commands. Not many drives with OEM firmware (in your case, Dell firmware) do. If you're lucky, the drive will be configured so it always changes the book type to DVD-ROM - and with your drive/firmware, that can't be changed.
Recommended Posts